fix pkg_version in openwrt-makefile

Add ENTRYPOINT for  convenience

Dockerfile

@@ -0,0 +1,13 @@
+FROM alpine:3.6 as builder
+
+WORKDIR /
+
+RUN apk add --no-cache git  build-base linux-headers && \
+ git clone https://github.com/wangyu-/udp2raw-tunnel.git  && \
+ cd udp2raw-tunnel && \
+ make dynamic
+
+FROM alpine:3.6
+RUN apk add --no-cache libstdc++ iptables
+COPY --from=builder /udp2raw-tunnel/udp2raw_dynamic /bin/
+ENTRYPOINT [ "/bin/udp2raw_dynamic" ]

ISSUE_TEMPLATE.md

@@ -0,0 +1,6 @@
+For English speaking user：
+https://github.com/wangyu-/UDPspeeder/wiki/Issue-Guide
+
+中文用户请看：
+https://github.com/wangyu-/UDPspeeder/wiki/发Issue前请看
+(否则Issue可能被忽略，或被直接关掉)

README.md

@@ -1,30 +1,21 @@
 # Udp2raw-tunnel
-![image0](images/image0.PNG)
+
 
 A Tunnel which turns UDP Traffic into Encrypted FakeTCP/UDP/ICMP Traffic by using Raw Socket, helps you Bypass UDP FireWalls(or Unstable UDP Environment). It can defend Replay-Attack and supports Multiplexing. It also acts as a Connection Stabilizer.
 
-It can tunnel any traffic when used together with a UDP-based VPN(such as OpenVPN).Check [this link](https://github.com/wangyu-/udp2raw-tunnel#tunneling-any-traffic-via-raw-traffic-by-using-udp2raw-openvpn) for more info.
+![image0](images/image0.PNG)
 
-[简体中文](/doc/README.zh-cn.md)
-# Frequently Asked Questions
-### Q: What is the advantage of using udp2raw FakeTCP mode,why not use a TCP-based VPN(such as OpenVPN TCP mode)?
-Answer: **TCP doesnt allow real-time/out-of-order delivery**. **If you use OpenVPN TCP mode to turn UDP traffic into TCP,there will be latency issue**:the loss of a single packet blocks all following packet until re-transmission is done. This will cause unacceptable delay for gaming and voice chatting.
+When used alone,udp2raw tunnels only UDP traffic. Nevertheless,if you used udp2raw + any UDP-based VPN together,you can tunnel any traffic(include TCP/UDP/ICMP),currently OpenVPN/L2TP/ShadowVPN and [tinyFecVPN](https://github.com/wangyu-/tinyFecVPN) are confirmed to be supported. 
 
-**TCP also has re-transmission and congestion control which cant be disabled.** UDP programs usualy want to control packet sending rate by themselves. If you use OpenVPN TCP mode this cant be done because of the congestion control of underlying TCP protocol. Further more,with the re-transmission of underlying TCP,**if you send too many udp packets via an OpenVPN TCP connection,the connection will become completely unusable for a while**(It will eventually recover as most of the re-transmission is done,but it wont be very soon).
+![image_vpn](images/udp2rawopenvpn.PNG)
 
-Those issues exist for almost all TCP-based VPNs.
-
-For udp2raw there is no underlying TCP protocol,udp2raw just add TCP headers to UDP packets directly by using raw socket. It supports real-time/out-of-order delivery,there is no re-transmission and congestion control. **Udp2raw doesnt have all above issues**.
-
-### Q: Is udp2raw designed for replacing VPN?
-Answer: No. Udp2raw is designed for bypassing UDP restrictions. It doesnt have all of the features a VPN has(such as transparently redirect all traffic).
-
-Instead of replacing VPN,udp2raw can be used with any UDP-based VPN together to grant UDP-based VPN the ablity of bypassing UDP restrictions,while not having the performance issue involved by a TCP-based VPN. Check [this link](https://github.com/wangyu-/udp2raw-tunnel#tunneling-any-traffic-via-raw-traffic-by-using-udp2raw-openvpn) for more info.
+[简体中文](/doc/README.zh-cn.md)(内容更丰富)
 
 # Support Platforms
 Linux host (including desktop Linux,Android phone/tablet,OpenWRT router,or Raspberry PI) with root access.
 
-For Winodws/MacOS,the 4.4mb virtual image with udp2raw pre-installed has been released,you can load it with Vmware/VirtualBox.The virtual image has been set to auto obtain ip,udp2raw can be run imidiately after boot finished(make sure network mode of virtual machine has been set to bridged)(only udp2raw has to be run under virtual machine,all other programs runs under Windows/MacOS as usual).
+For Windows and MacOS You can run udp2raw inside [this](https://github.com/wangyu-/udp2raw-tunnel/releases/download/20171108.0/lede-17.01.2-x86_virtual_machine_image.zip) 7.5mb virtual machine image(make sure network adapter runs at bridged mode).
+
 
 
 # Features 
@@ -60,6 +51,22 @@ For example, if you use udp2raw + OpenVPN, OpenVPN won't lose connection after a
 ### Keywords
 `Bypass UDP QoS` `Bypass UDP Blocking` `Bypass OpenVPN TCP over TCP problem` `OpenVPN over ICMP` `UDP to ICMP tunnel` `UDP to TCP tunnel` `UDP over ICMP` `UDP over TCP`
 
+# Frequently Asked Questions
+### Q: What is the advantage of using udp2raw FakeTCP mode,why not use a TCP-based VPN(such as OpenVPN TCP mode)?
+Answer: **TCP doesnt allow real-time/out-of-order delivery**. **If you use OpenVPN TCP mode to turn UDP traffic into TCP,there will be latency issue**:the loss of a single packet blocks all following packet until re-transmission is done. This will cause unacceptable delay for gaming and voice chatting.
+
+**TCP also has re-transmission and congestion control which cant be disabled.** UDP programs usualy want to control packet sending rate by themselves. If you use OpenVPN TCP mode this cant be done because of the congestion control of underlying TCP protocol. Further more,with the re-transmission of underlying TCP,**if you send too many udp packets via an OpenVPN TCP connection,the connection will become completely unusable for a while**(It will eventually recover as most of the re-transmission is done,but it wont be very soon).
+
+Those issues exist for almost all TCP-based VPNs.
+
+For udp2raw there is no underlying TCP protocol,udp2raw just add TCP headers to UDP packets directly by using raw socket. It supports real-time/out-of-order delivery,there is no re-transmission and congestion control. **Udp2raw doesnt have all above issues**.
+
+### Q: Is udp2raw designed for replacing VPN?
+Answer: No. Udp2raw is designed for bypassing UDP restrictions. It doesnt have all of the features a VPN has(such as transparently redirect all traffic).
+
+Instead of replacing VPN,udp2raw can be used with any UDP-based VPN together to grant UDP-based VPN the ablity of bypassing UDP restrictions,while not having the performance issue involved by a TCP-based VPN. Check [this link](https://github.com/wangyu-/udp2raw-tunnel#tunneling-any-traffic-via-raw-traffic-by-using-udp2raw-openvpn) for more info.
+
+
 # Getting Started
 ### Installing
 Download binary release from https://github.com/wangyu-/udp2raw-tunnel/releases
@@ -74,6 +81,8 @@ Assume your UDP is blocked or being QOS-ed or just poorly supported. Assume your
 # Run at client side
 ./udp2raw_amd64 -c -l0.0.0.0:3333  -r44.55.66.77:4096 -a -k "passwd" --raw-mode faketcp
 ```
+(The above commands need to be run as root. For better security, with some extra steps, you can run udp2raw as non-root. Check [this link](https://github.com/wangyu-/udp2raw-tunnel/wiki/run-udp2raw-as-non-root) for more info  )
+
 ###### Server Output:
 ![](images/output_server.PNG)
 ###### Client Output:
@@ -84,15 +93,15 @@ Now,an encrypted raw tunnel has been established between client and server throu
 ### Note
 To run on Android, check [Android_Guide](/doc/android_guide.md)
 
-If you have connection problems.Take a look at `--seq-mode` option.
+If you have connection problems. Take a look at `--seq-mode` option.
+
 
-You can run udp2raw with a non-root account(for better security).Take a look at [#26](https://github.com/wangyu-/udp2raw-tunnel/issues/26) for more info. 
 
 # Advanced Topic
 ### Usage
 ```
 udp2raw-tunnel
-version: Aug 26 2017 08:30:48
+git version:6e1df4b39f    build date:Oct 24 2017 09:21:15
 repository: https://github.com/wangyu-/udp2raw-tunnel
 
 usage:
@@ -115,17 +124,23 @@ client options:
 other options:
     --conf-file           <string>        read options from a configuration file instead of command line.
                                           check example.conf in repo for format
-    --log-level           <number>        0:never    1:fatal   2:error   3:warn 
+    --fifo                <string>        use a fifo(named pipe) for sending commands to the running program,
+                                          check readme.md in repository for supported commands.
+    --log-level           <number>        0:never    1:fatal   2:error   3:warn
                                           4:info (default)     5:debug   6:trace
     --log-position                        enable file name,function name,line number in log
     --disable-color                       disable log color
     --disable-bpf                         disable the kernel space filter,most time its not necessary
                                           unless you suspect there is a bug
     --sock-buf            <number>        buf size for socket,>=10 and <=10240,unit:kbyte,default:1024
-    --seqmode             <number>        seq increase mode for faketcp:
-                                          0:dont increase
-                                          1:increase every packet(default)
-                                          2:increase randomly, about every 3 packets
+    --force-sock-buf                      bypass system limitation while setting sock-buf
+    --seq-mode            <number>        seq increase mode for faketcp:
+                                          0:static header,do not increase seq and ack_seq
+                                          1:increase seq for every packet,simply ack last seq
+                                          2:increase seq randomly, about every 3 packets,simply ack last seq
+                                          3:simulate an almost real seq/ack procedure(default)
+                                          4:similiar to 3,but do not consider TCP Option Window_Scale,
+                                          maybe useful when firewall doesnt support TCP Option
     --lower-level         <string>        send packets at OSI level 2, format:'if_name#dest_mac_adress'
                                           ie:'eth0#00:23:45:67:89:b9'.or try '--lower-level auto' to obtain
                                           the parameter automatically,specify it manually if 'auto' failed
@@ -183,6 +198,10 @@ Then start the server with
 ./udp2raw_amd64 --conf-file server.conf
 ```
 
+### `--fifo`
+Use a fifo(named pipe) for sending commands to the running program. For example `--fifo fifo.file`.
+
+At client side,you can use `echo reconnect >fifo.file` to force client to reconnect.Currently no command has been implemented for server.
 
 # Peformance Test
 #### Test method:
@@ -214,7 +233,7 @@ raw_mode: faketcp  cipher_mode: aes128cbc  auth_mode: md5
 
 # Application
 ## Tunneling any traffic via raw traffic by using udp2raw +openvpn
-![image_vpn](images/openvpn.PNG)
+![image_vpn](images/udp2rawopenvpn.PNG)
 1. Bypasses UDP block/UDP QOS
 
 2. No TCP over TCP problem (TCP over TCP problem http://sites.inka.de/bigred/devel/tcp-tcp.html ,https://community.openvpn.net/openvpn/ticket/2 )

common.cpp

@@ -7,32 +7,16 @@
 
 #include "common.h"
 #include "log.h"
+#include "misc.h"
 
 
-
-int about_to_exit=0;
-
-raw_mode_t raw_mode=mode_faketcp;
-unordered_map<int, const char*> raw_mode_tostring = {{mode_faketcp, "faketcp"}, {mode_udp, "udp"}, {mode_icmp, "icmp"}};
-int socket_buf_size=1024*1024;
-int force_socket_buf=0;
-
 static int random_number_fd=-1;
-string iptables_pattern="";
-int iptables_rule_added=0;
-int iptables_rule_keeped=0;
-int iptables_rule_keep_index=0;
-//int iptables_rule_no_clear=0;
-
-
-
-program_mode_t program_mode=unset_mode;//0 unset; 1client 2server
 
 u64_t get_current_time()
 {
 	timespec tmp_time;
 	clock_gettime(CLOCK_MONOTONIC, &tmp_time);
-	return tmp_time.tv_sec*1000+tmp_time.tv_nsec/(1000*1000l);
+	return ((u64_t)tmp_time.tv_sec)*1000llu+((u64_t)tmp_time.tv_nsec)/(1000*1000llu);
 }
 
 u64_t pack_u64(u32_t a,u32_t b)
@@ -58,167 +42,6 @@ char * my_ntoa(u32_t ip)
 	return inet_ntoa(a);
 }
 
-
-/*
-int add_iptables_rule(const char * s)
-{
-
-	iptables_pattern=s;
-
-	string rule="iptables -I INPUT ";
-	rule+=iptables_pattern;
-	rule+=" -j DROP";
-
-	char *output;
-	if(run_command(rule.c_str(),output)==0)
-	{
-		mylog(log_warn,"auto added iptables rule by:  %s\n",rule.c_str());
-	}
-	else
-	{
-		mylog(log_fatal,"auto added iptables failed by: %s\n",rule.c_str());
-		//mylog(log_fatal,"reason : %s\n",strerror(errno));
-		myexit(-1);
-	}
-	iptables_rule_added=1;
-	return 0;
-}*/
-string chain[2];
-string rule_keep[2];
-string rule_keep_add[2];
-string rule_keep_del[2];
-u64_t keep_rule_last_time=0;
-
-pthread_t keep_thread;
-int keep_thread_running=0;
-int iptables_gen_add(const char * s,u32_t const_id)
-{
-	string dummy="";
-	iptables_pattern=s;
-	chain[0] =dummy+ "udp2rawDwrW_C";
-	rule_keep[0]=dummy+ iptables_pattern+" -j " +chain[0];
-	rule_keep_add[0]=dummy+"iptables -I INPUT "+rule_keep[0];
-
-	char *output;
-	run_command(dummy+"iptables -N "+chain[0],output,show_none);
-	run_command(dummy+"iptables -F "+chain[0],output);
-	run_command(dummy+"iptables -I "+chain[0] + " -j DROP",output);
-
-	rule_keep_del[0]=dummy+"iptables -D INPUT "+rule_keep[0];
-
-	run_command(rule_keep_del[0],output,show_none);
-	run_command(rule_keep_del[0],output,show_none);
-
-	if(run_command(rule_keep_add[0],output)!=0)
-	{
-		mylog(log_fatal,"auto added iptables failed by: %s\n",rule_keep_add[0].c_str());
-		myexit(-1);
-	}
-	return 0;
-}
-int iptables_rule_init(const char * s,u32_t const_id,int keep)
-{
-	iptables_pattern=s;
-	iptables_rule_added=1;
-	iptables_rule_keeped=keep;
-
-	string dummy="";
-	char const_id_str[100];
-	sprintf(const_id_str, "%x", const_id);
-
-	chain[0] =dummy+ "udp2rawDwrW_"+const_id_str+"_C0";
-	chain[1] =dummy+ "udp2rawDwrW_"+const_id_str+"_C1";
-
-	rule_keep[0]=dummy+ iptables_pattern+" -j " +chain[0];
-	rule_keep[1]=dummy+ iptables_pattern+" -j " +chain[1];
-
-	rule_keep_add[0]=dummy+"iptables -I INPUT "+rule_keep[0];
-	rule_keep_add[1]=dummy+"iptables -I INPUT "+rule_keep[1];
-
-	rule_keep_del[0]=dummy+"iptables -D INPUT "+rule_keep[0];
-	rule_keep_del[1]=dummy+"iptables -D INPUT "+rule_keep[1];
-
-	keep_rule_last_time=get_current_time();
-
-	char *output;
-
-	for(int i=0;i<=iptables_rule_keeped;i++)
-	{
-		run_command(dummy+"iptables -N "+chain[i],output);
-		run_command(dummy+"iptables -F "+chain[i],output);
-		run_command(dummy+"iptables -I "+chain[i] + " -j DROP",output);
-
-		if(run_command(rule_keep_add[i],output)!=0)
-		{
-			mylog(log_fatal,"auto added iptables failed by: %s\n",rule_keep_add[i].c_str());
-			myexit(-1);
-		}
-	}
-	mylog(log_warn,"auto added iptables rules\n");
-	return 0;
-}
-
-int keep_iptables_rule()  //magic to work on a machine without grep/iptables --check/-m commment
-{
-	/*
-	if(iptables_rule_keeped==0) return  0;
-
-
-	uint64_t tmp_current_time=get_current_time();
-	if(tmp_current_time-keep_rule_last_time<=iptables_rule_keep_interval)
-	{
-		return 0;
-	}
-	else
-	{
-		keep_rule_last_time=tmp_current_time;
-	}*/
-
-	mylog(log_debug,"keep_iptables_rule begin %llu\n",get_current_time());
-	iptables_rule_keep_index+=1;
-	iptables_rule_keep_index%=2;
-
-	string dummy="";
-	char *output;
-
-	int i=iptables_rule_keep_index;
-
-	run_command(dummy + "iptables -N " + chain[i], output,show_none);
-
-	if (run_command(dummy + "iptables -F " + chain[i], output,show_none) != 0)
-		mylog(log_warn, "iptables -F failed %d\n",i);
-
-	if (run_command(dummy + "iptables -I " + chain[i] + " -j DROP",output,show_none) != 0)
-		mylog(log_warn, "iptables -I failed %d\n",i);
-
-	if (run_command(rule_keep_del[i], output,show_none) != 0)
-		mylog(log_warn, "rule_keep_del failed %d\n",i);
-
-	run_command(rule_keep_del[i], output,show_none); //do it twice,incase it fails for unknown random reason
-
-	if(run_command(rule_keep_add[i], output,show_log)!=0)
-		mylog(log_warn, "rule_keep_del failed %d\n",i);
-
-	mylog(log_debug,"keep_iptables_rule end %llu\n",get_current_time());
-	return 0;
-}
-
-int clear_iptables_rule()
-{
-	char *output;
-	string dummy="";
-	if(!iptables_rule_added) return 0;
-
-	for(int i=0;i<=iptables_rule_keeped;i++ )
-	{
-		run_command(rule_keep_del[i],output);
-		run_command(dummy+"iptables -F "+chain[i],output);
-		run_command(dummy+"iptables -X "+chain[i],output);
-	}
-	return 0;
-}
-
-
 void init_random_number_fd()
 {
 
@@ -326,8 +149,7 @@ unsigned short csum(const unsigned short *ptr,int nbytes) {//works both for big
     return(answer);
 }
 
-
-int set_buf_size(int fd)
+int set_buf_size(int fd,int socket_buf_size,int force_socket_buf)
 {
 	if(force_socket_buf)
 	{
@@ -358,30 +180,6 @@ int set_buf_size(int fd)
 	return 0;
 }
 
-void myexit(int a)
-{
-    if(enable_log_color)
-   	printf("%s\n",RESET);
-    if(keep_thread_running)
-    {
-		if(pthread_cancel(keep_thread))
-		{
-			mylog(log_warn,"pthread_cancel failed\n");
-		}
-		else
-		{
-			mylog(log_info,"pthread_cancel success\n");
-		}
-    }
-	clear_iptables_rule();
-	exit(a);
-}
-void  signal_handler(int sig)
-{
-	about_to_exit=1;
-    // myexit(0);
-}
-
 int numbers_to_char(id_t id1,id_t id2,id_t id3,char * &data,int &len)
 {
 	static char buf[buf_len];
@@ -399,7 +197,6 @@ int numbers_to_char(id_t id1,id_t id2,id_t id3,char * &data,int &len)
 	return 0;
 }
 
-
 int char_to_numbers(const char * data,int len,id_t &id1,id_t &id2,id_t &id3)
 {
 	if(len<int(sizeof(id_t)*3)) return -1;
@@ -502,6 +299,26 @@ bool larger_than_u16(uint16_t a,uint16_t b)
 		}
 	}
 }
+
+void myexit(int a)
+{
+    if(enable_log_color)
+   	printf("%s\n",RESET);
+    if(keep_thread_running)
+    {
+		if(pthread_cancel(keep_thread))
+		{
+			mylog(log_warn,"pthread_cancel failed\n");
+		}
+		else
+		{
+			mylog(log_info,"pthread_cancel success\n");
+		}
+    }
+	clear_iptables_rule();
+	exit(a);
+}
+
 vector<string> string_to_vec(const char * s,const char * sp) {
 	  vector<string> res;
 	  string str=s;
@@ -739,12 +556,58 @@ vector<string> parse_conf_line(const string& s0)
 }
 
 
-
-
-
-
-
-
+int create_fifo(char * file)
+{
+	if(mkfifo (file, 0666)!=0)
+	{
+		if(errno==EEXIST)
+		{
+			mylog(log_warn,"warning fifo file %s exist\n",file);
+		}
+		else
+		{
+			mylog(log_fatal,"create fifo file %s failed\n",file);
+			myexit(-1);
+		}
+	}
+	int fifo_fd=open (file, O_RDWR);
+	if(fifo_fd<0)
+	{
+		mylog(log_fatal,"create fifo file %s failed\n",file);
+		myexit(-1);
+	}
+	struct stat st;
+	if (fstat(fifo_fd, &st)!=0)
+	{
+		mylog(log_fatal,"fstat failed for fifo file %s\n",file);
+		myexit(-1);
+	}
+
+	if(!S_ISFIFO(st.st_mode))
+	{
+		mylog(log_fatal,"%s is not a fifo\n",file);
+		myexit(-1);
+	}
+
+	setnonblocking(fifo_fd);
+	return fifo_fd;
+}
+
+void ip_port_t::from_u64(u64_t u64)
+{
+	ip=get_u64_h(u64);
+	port=get_u64_l(u64);
+}
+u64_t ip_port_t::to_u64()
+{
+	return pack_u64(ip,port);
+}
+char * ip_port_t::to_s()
+{
+	static char res[40];
+	sprintf(res,"%s:%d",my_ntoa(ip),port);
+	return res;
+}
 
 
 

common.h

@@ -21,6 +21,7 @@
 #include <sys/wait.h>
 #include <sys/socket.h>    //for socket ofcourse
 #include <sys/types.h>
+#include <sys/stat.h>
 #include <stdlib.h> //for exit(0);
 #include <errno.h> //For errno - the error number
 #include <netinet/tcp.h>   //Provides declarations for tcp header
@@ -47,8 +48,11 @@
 #include <pthread.h>
 
 #include<unordered_map>
-#include<vector>
-#include<string>
+#include <fstream>
+#include <string>
+#include <vector>
+#include <map>
+#include <set>
 using  namespace std;
 
 
@@ -58,57 +62,6 @@ typedef long long i64_t;
 typedef unsigned int u32_t;
 typedef int i32_t;
 
-
-const int max_data_len=1600;
-const int buf_len=max_data_len+400;
-const u32_t max_handshake_conn_num=10000;
-const u32_t max_ready_conn_num=1000;
-const u32_t anti_replay_window_size=4000;
-const int max_conv_num=10000;
-
-const u32_t client_handshake_timeout=5000;//unit ms
-const u32_t client_retry_interval=1000;//ms
-
-const u32_t server_handshake_timeout=client_handshake_timeout+5000;// this should be longer than clients. client retry initially ,server retry passtively
-
-const int conv_clear_ratio=10;  //conv grabage collecter check 1/10 of all conv one time
-const int conn_clear_ratio=30;
-const int conv_clear_min=1;
-const int conn_clear_min=1;
-
-const u32_t conv_clear_interval=3000;//ms
-const u32_t conn_clear_interval=3000;//ms
-
-
-const i32_t max_fail_time=0;//disable
-
-const u32_t heartbeat_interval=1000;//ms
-
-const u32_t timer_interval=400;//ms. this should be smaller than heartbeat_interval and retry interval;
-
-const uint32_t conv_timeout=120000; //ms. 120 second
-//const u32_t conv_timeout=30000; //for test
-
-const u32_t client_conn_timeout=15000;//ms.
-const u32_t client_conn_uplink_timeout=client_conn_timeout+2000;//ms
-
-const uint32_t server_conn_timeout=conv_timeout+60000;//ms. this should be 60s+ longer than conv_timeout,so that conv_manager can destruct convs gradually,to avoid latency glicth
-//const u32_t server_conn_timeout=conv_timeout+10000;//for test
-
-const u32_t iptables_rule_keep_interval=15;//unit: second;
-
-extern int about_to_exit;
-extern pthread_t keep_thread;
-extern int keep_thread_running;
-
-enum raw_mode_t{mode_faketcp=0,mode_udp,mode_icmp,mode_end};
-extern raw_mode_t raw_mode;
-enum program_mode_t {unset_mode=0,client_mode,server_mode};
-extern program_mode_t program_mode;
-extern unordered_map<int, const char*> raw_mode_tostring ;
-extern int socket_buf_size;
-extern int force_socket_buf;
-
 typedef u32_t id_t;
 
 typedef u64_t iv_t;
@@ -117,6 +70,24 @@ typedef u64_t padding_t;
 
 typedef u64_t anti_replay_seq_t;
 
+
+struct ip_port_t
+{
+	u32_t ip;
+	int port;
+	void from_u64(u64_t u64);
+	u64_t to_u64();
+	char * to_s();
+};
+
+
+
+
+typedef u64_t fd64_t;
+
+const int max_data_len=1600;
+const int buf_len=max_data_len+400;
+
 u64_t get_current_time();
 u64_t pack_u64(u32_t a,u32_t b);
 
@@ -126,7 +97,6 @@ u32_t get_u64_l(u64_t a);
 
 char * my_ntoa(u32_t ip);
 
-void myexit(int a);
 void init_random_number_fd();
 u64_t get_true_random_number_64();
 u32_t get_true_random_number();
@@ -136,28 +106,20 @@ u64_t hton64(u64_t a);
 bool larger_than_u16(uint16_t a,uint16_t b);
 bool larger_than_u32(u32_t a,u32_t b);
 void setnonblocking(int sock);
-int set_buf_size(int fd);
-
-unsigned short csum(const unsigned short *ptr,int nbytes);
-
-void  signal_handler(int sig);
-int numbers_to_char(id_t id1,id_t id2,id_t id3,char * &data,int &len);
-int char_to_numbers(const char * data,int len,id_t &id1,id_t &id2,id_t &id3);
+int set_buf_size(int fd,int socket_buf_size,int force_socket_buf);
 
 void myexit(int a);
 
-int add_iptables_rule(const char *);
+unsigned short csum(const unsigned short *ptr,int nbytes);
 
-int clear_iptables_rule();
-
-int iptables_gen_add(const char * s,u32_t const_id);
-int iptables_rule_init(const char * s,u32_t const_id,int keep);
-int keep_iptables_rule();
+int numbers_to_char(id_t id1,id_t id2,id_t id3,char * &data,int &len);
+int char_to_numbers(const char * data,int len,id_t &id1,id_t &id2,id_t &id3);
 
 const int show_none=0;
 const int show_command=0x1;
 const int show_log=0x2;
 const int show_all=show_command|show_log;
+
 int run_command(string command,char * &output,int flag=show_all);
 //int run_command_no_log(string command,char * &output);
 int read_file(const char * file,string &output);
@@ -175,4 +137,6 @@ int hex_to_u32_with_endian(const string & a,u32_t &output);
 int hex_to_u32(const string & a,u32_t &output);
 //extern string iptables_pattern;
 
+int create_fifo(char * file);
+
 #endif /* COMMON_H_ */

connection.cpp

@@ -0,0 +1,777 @@
+/*
+ * connection.cpp
+ *
+ *  Created on: Sep 23, 2017
+ *      Author: root
+ */
+
+#include "connection.h"
+#include "encrypt.h"
+#include "fd_manager.h"
+
+
+int disable_anti_replay=0;//if anti_replay windows is diabled
+
+const int disable_conv_clear=0;//a udp connection in the multiplexer is called conversation in this program,conv for short.
+
+const int disable_conn_clear=0;//a raw connection is called conn.
+
+conn_manager_t conn_manager;
+
+	anti_replay_seq_t anti_replay_t::get_new_seq_for_send()
+	{
+		return anti_replay_seq++;
+	}
+	anti_replay_t::anti_replay_t()
+	{
+		max_packet_received=0;
+		anti_replay_seq=get_true_random_number_64()/10;//random first seq
+		//memset(window,0,sizeof(window)); //not necessary
+	}
+	void anti_replay_t::re_init()
+	{
+		max_packet_received=0;
+		//memset(window,0,sizeof(window));
+	}
+
+	int anti_replay_t::is_vaild(u64_t seq)
+	{
+		if(disable_anti_replay) return 1;
+		//if(disabled) return 0;
+
+		if(seq==max_packet_received) return 0;
+		else if(seq>max_packet_received)
+		{
+			if(seq-max_packet_received>=anti_replay_window_size)
+			{
+				memset(window,0,sizeof(window));
+				window[seq%anti_replay_window_size]=1;
+			}
+			else
+			{
+				for (u64_t i=max_packet_received+1;i<seq;i++)
+					window[i%anti_replay_window_size]=0;
+				window[seq%anti_replay_window_size]=1;
+			}
+			max_packet_received=seq;
+			return 1;
+		}
+		else if(seq<max_packet_received)
+		{
+			if(max_packet_received-seq>=anti_replay_window_size) return 0;
+			else
+			{
+				if (window[seq%anti_replay_window_size]==1) return 0;
+				else
+				{
+					window[seq%anti_replay_window_size]=1;
+					return 1;
+				}
+			}
+		}
+
+
+		return 0; //for complier check
+	}
+
+
+void server_clear_function(u64_t u64);
+
+conv_manager_t::conv_manager_t()
+	{
+		clear_it=conv_last_active_time.begin();
+		long long last_clear_time=0;
+		//clear_function=0;
+	}
+conv_manager_t::~conv_manager_t()
+	{
+		clear();
+	}
+	int conv_manager_t::get_size()
+	{
+		return conv_to_u64.size();
+	}
+	void conv_manager_t::reserve()
+	{
+		u64_to_conv.reserve(10007);
+		conv_to_u64.reserve(10007);
+		conv_last_active_time.reserve(10007);
+	}
+	void conv_manager_t::clear()
+	{
+		if(disable_conv_clear) return ;
+
+		if(program_mode==server_mode)
+		{
+			for(it=conv_to_u64.begin();it!=conv_to_u64.end();it++)
+			{
+				//int fd=int((it->second<<32u)>>32u);
+				server_clear_function(  it->second);
+			}
+		}
+		u64_to_conv.clear();
+		conv_to_u64.clear();
+		conv_last_active_time.clear();
+
+		clear_it=conv_last_active_time.begin();
+
+	}
+	u32_t conv_manager_t::get_new_conv()
+	{
+		u32_t conv=get_true_random_number_nz();
+		while(conv_to_u64.find(conv)!=conv_to_u64.end())
+		{
+			conv=get_true_random_number_nz();
+		}
+		return conv;
+	}
+	int conv_manager_t::is_conv_used(u32_t conv)
+	{
+		return conv_to_u64.find(conv)!=conv_to_u64.end();
+	}
+	int conv_manager_t::is_u64_used(u64_t u64)
+	{
+		return u64_to_conv.find(u64)!=u64_to_conv.end();
+	}
+	u32_t conv_manager_t::find_conv_by_u64(u64_t u64)
+	{
+		return u64_to_conv[u64];
+	}
+	u64_t conv_manager_t::find_u64_by_conv(u32_t conv)
+	{
+		return conv_to_u64[conv];
+	}
+	int conv_manager_t::update_active_time(u32_t conv)
+	{
+		return conv_last_active_time[conv]=get_current_time();
+	}
+	int conv_manager_t::insert_conv(u32_t conv,u64_t u64)
+	{
+		u64_to_conv[u64]=conv;
+		conv_to_u64[conv]=u64;
+		conv_last_active_time[conv]=get_current_time();
+		return 0;
+	}
+	int conv_manager_t::erase_conv(u32_t conv)
+	{
+		if(disable_conv_clear) return 0;
+		u64_t u64=conv_to_u64[conv];
+		if(program_mode==server_mode)
+		{
+			server_clear_function(u64);
+		}
+		conv_to_u64.erase(conv);
+		u64_to_conv.erase(u64);
+		conv_last_active_time.erase(conv);
+		return 0;
+	}
+	int conv_manager_t::clear_inactive(char * ip_port)
+	{
+		if(get_current_time()-last_clear_time>conv_clear_interval)
+		{
+			last_clear_time=get_current_time();
+			return clear_inactive0(ip_port);
+		}
+		return 0;
+	}
+	int conv_manager_t::clear_inactive0(char * ip_port)
+	{
+		if(disable_conv_clear) return 0;
+
+
+		//map<uint32_t,uint64_t>::iterator it;
+		int cnt=0;
+		it=clear_it;
+		int size=conv_last_active_time.size();
+		int num_to_clean=size/conv_clear_ratio+conv_clear_min;   //clear 1/10 each time,to avoid latency glitch
+
+		num_to_clean=min(num_to_clean,size);
+
+		u64_t current_time=get_current_time();
+		for(;;)
+		{
+			if(cnt>=num_to_clean) break;
+			if(conv_last_active_time.begin()==conv_last_active_time.end()) break;
+
+			if(it==conv_last_active_time.end())
+			{
+				it=conv_last_active_time.begin();
+			}
+
+			if( current_time -it->second  >conv_timeout )
+			{
+				//mylog(log_info,"inactive conv %u cleared \n",it->first);
+				old_it=it;
+				it++;
+				u32_t conv= old_it->first;
+				erase_conv(old_it->first);
+				if(ip_port==0)
+				{
+					mylog(log_info,"conv %x cleared\n",conv);
+				}
+				else
+				{
+					mylog(log_info,"[%s]conv %x cleared\n",ip_port,conv);
+				}
+			}
+			else
+			{
+				it++;
+			}
+			cnt++;
+		}
+		clear_it=it;
+		return 0;
+	}
+
+
+	 void conn_info_t::recover(const conn_info_t &conn_info)
+	 {
+			raw_info=conn_info.raw_info;
+			last_state_time=conn_info.last_state_time;
+			last_hb_recv_time=conn_info.last_hb_recv_time;
+			last_hb_sent_time=conn_info.last_hb_sent_time;
+			my_id=conn_info.my_id;
+			oppsite_id=conn_info.oppsite_id;
+			blob->anti_replay.re_init();
+
+			my_roller=0;//no need to set,but for easier debug,set it to zero
+			oppsite_roller=0;//same as above
+			last_oppsite_roller_time=0;
+	 }
+
+	void conn_info_t::re_init()
+	{
+		//send_packet_info.protocol=g_packet_info_send.protocol;
+		if(program_mode==server_mode)
+			state.server_current_state=server_idle;
+		else
+			state.client_current_state=client_idle;
+		last_state_time=0;
+		oppsite_const_id=0;
+
+		timer_fd64=0;
+
+		my_roller=0;
+		oppsite_roller=0;
+		last_oppsite_roller_time=0;
+	}
+	conn_info_t::conn_info_t()
+	{
+		blob=0;
+		re_init();
+	}
+	void conn_info_t::prepare()
+	{
+		blob=new blob_t;
+
+	}
+	conn_info_t::conn_info_t(const conn_info_t&b)
+	{
+		//mylog(log_error,"called!!!!!!!!!!!!!\n");
+		*this=b;
+		if(blob!=0)
+		{
+			blob=new blob_t(*b.blob);
+		}
+	}
+	conn_info_t& conn_info_t::operator=(const conn_info_t& b)
+	  {
+		mylog(log_fatal,"not allowed\n");
+		myexit(-1);
+	    return *this;
+	  }
+	conn_info_t::~conn_info_t()
+	{
+		if(program_mode==server_mode)
+		{
+			if(state.server_current_state==server_ready)
+			{
+				assert(blob!=0);
+				assert(oppsite_const_id!=0);
+				//assert(conn_manager.const_id_mp.find(oppsite_const_id)!=conn_manager.const_id_mp.end()); // conn_manager 's deconstuction function  erases it
+			}
+			else
+			{
+				assert(blob==0);
+				assert(oppsite_const_id==0);
+			}
+		}
+		assert(timer_fd64==0);
+		//if(oppsite_const_id!=0)     //do this at conn_manager 's deconstuction function
+			//conn_manager.const_id_mp.erase(oppsite_const_id);
+		if(blob!=0)
+			delete blob;
+
+		//send_packet_info.protocol=g_packet_info_send.protocol;
+	}
+
+
+	conn_manager_t::conn_manager_t()
+ {
+	 ready_num=0;
+	 mp.reserve(10007);
+	 clear_it=mp.begin();
+	// timer_fd_mp.reserve(10007);
+	 const_id_mp.reserve(10007);
+	// udp_fd_mp.reserve(100007);
+	 last_clear_time=0;
+	 //current_ready_ip=0;
+	// current_ready_port=0;
+ }
+ int conn_manager_t::exist(u32_t ip,uint16_t port)
+ {
+	 u64_t u64=0;
+	 u64=ip;
+	 u64<<=32u;
+	 u64|=port;
+	 if(mp.find(u64)!=mp.end())
+	 {
+		 return 1;
+	 }
+	 return 0;
+ }
+ /*
+ int insert(uint32_t ip,uint16_t port)
+ {
+	 uint64_t u64=0;
+	 u64=ip;
+	 u64<<=32u;
+	 u64|=port;
+	 mp[u64];
+	 return 0;
+ }*/
+ conn_info_t *& conn_manager_t::find_insert_p(u32_t ip,uint16_t port)  //be aware,the adress may change after rehash
+ {
+	 u64_t u64=0;
+	 u64=ip;
+	 u64<<=32u;
+	 u64|=port;
+	 unordered_map<u64_t,conn_info_t*>::iterator it=mp.find(u64);
+	 if(it==mp.end())
+	 {
+		 mp[u64]=new conn_info_t;
+	 }
+	 return mp[u64];
+ }
+ conn_info_t & conn_manager_t::find_insert(u32_t ip,uint16_t port)  //be aware,the adress may change after rehash
+ {
+	 u64_t u64=0;
+	 u64=ip;
+	 u64<<=32u;
+	 u64|=port;
+	 unordered_map<u64_t,conn_info_t*>::iterator it=mp.find(u64);
+	 if(it==mp.end())
+	 {
+		 mp[u64]=new conn_info_t;
+	 }
+	 return *mp[u64];
+ }
+ int conn_manager_t::erase(unordered_map<u64_t,conn_info_t*>::iterator erase_it)
+ {
+		if(erase_it->second->state.server_current_state==server_ready)
+		{
+			ready_num--;
+			assert(i32_t(ready_num)!=-1);
+			assert(erase_it->second!=0);
+
+			assert(erase_it->second->timer_fd64 !=0);
+
+			assert(fd_manager.exist(erase_it->second->timer_fd64));
+
+			assert(erase_it->second->oppsite_const_id!=0);
+			assert(const_id_mp.find(erase_it->second->oppsite_const_id)!=const_id_mp.end());
+
+
+			//assert(timer_fd_mp.find(erase_it->second->timer_fd)!=timer_fd_mp.end());
+
+			const_id_mp.erase(erase_it->second->oppsite_const_id);
+
+			fd_manager.fd64_close(erase_it->second->timer_fd64);
+
+			erase_it->second->timer_fd64=0;
+			//timer_fd_mp.erase(erase_it->second->timer_fd);
+			//close(erase_it->second->timer_fd);// close will auto delte it from epoll
+			delete(erase_it->second);
+			mp.erase(erase_it->first);
+		}
+		else
+		{
+			assert(erase_it->second->blob==0);
+			assert(erase_it->second->timer_fd64 ==0);
+
+
+			assert(erase_it->second->oppsite_const_id==0);
+			delete(erase_it->second);
+			mp.erase(erase_it->first);
+		}
+		return 0;
+ }
+int conn_manager_t::clear_inactive()
+{
+	if(get_current_time()-last_clear_time>conn_clear_interval)
+	{
+		last_clear_time=get_current_time();
+		return clear_inactive0();
+	}
+	return 0;
+}
+int conn_manager_t::clear_inactive0()
+{
+	 unordered_map<u64_t,conn_info_t*>::iterator it;
+	 unordered_map<u64_t,conn_info_t*>::iterator old_it;
+
+	if(disable_conn_clear) return 0;
+
+	//map<uint32_t,uint64_t>::iterator it;
+	int cnt=0;
+	it=clear_it;
+	int size=mp.size();
+	int num_to_clean=size/conn_clear_ratio+conn_clear_min;   //clear 1/10 each time,to avoid latency glitch
+
+	mylog(log_trace,"mp.size() %d\n", size);
+
+	num_to_clean=min(num_to_clean,(int)mp.size());
+	u64_t current_time=get_current_time();
+
+	for(;;)
+	{
+		if(cnt>=num_to_clean) break;
+		if(mp.begin()==mp.end()) break;
+
+		if(it==mp.end())
+		{
+			it=mp.begin();
+		}
+
+		if(it->second->state.server_current_state==server_ready &&current_time - it->second->last_hb_recv_time  <=server_conn_timeout)
+		{
+				it++;
+		}
+		else if(it->second->state.server_current_state!=server_ready&& current_time - it->second->last_state_time  <=server_handshake_timeout )
+		{
+			it++;
+		}
+		else if(it->second->blob!=0&&it->second->blob->conv_manager.get_size() >0)
+		{
+			assert(it->second->state.server_current_state==server_ready);
+			it++;
+		}
+		else
+		{
+			mylog(log_info,"[%s:%d]inactive conn cleared \n",my_ntoa(it->second->raw_info.recv_info.src_ip),it->second->raw_info.recv_info.src_port);
+			old_it=it;
+			it++;
+			erase(old_it);
+		}
+		cnt++;
+	}
+	clear_it=it;
+	return 0;
+}
+
+
+
+
+int send_bare(raw_info_t &raw_info,const char* data,int len)//send function with encryption but no anti replay,this is used when client and server verifys each other
+//you have to design the protocol carefully, so that you wont be affect by relay attack
+{
+	if(len<0)
+	{
+		mylog(log_debug,"input_len <0\n");
+		return -1;
+	}
+	packet_info_t &send_info=raw_info.send_info;
+	packet_info_t &recv_info=raw_info.recv_info;
+
+	char send_data_buf[buf_len];  //buf for send data and send hb
+	char send_data_buf2[buf_len];
+
+
+	//static send_bare[buf_len];
+	iv_t iv=get_true_random_number_64();
+	padding_t padding=get_true_random_number_64();
+
+	memcpy(send_data_buf,&iv,sizeof(iv));
+	memcpy(send_data_buf+sizeof(iv),&padding,sizeof(padding));
+
+	send_data_buf[sizeof(iv)+sizeof(padding)]='b';
+	memcpy(send_data_buf+sizeof(iv)+sizeof(padding)+1,data,len);
+	int new_len=len+sizeof(iv)+sizeof(padding)+1;
+
+	if(my_encrypt(send_data_buf,send_data_buf2,new_len,key)!=0)
+	{
+		return -1;
+	}
+	send_raw0(raw_info,send_data_buf2,new_len);
+	return 0;
+}
+int reserved_parse_bare(const char *input,int input_len,char* & data,int & len) // a sub function used in recv_bare
+{
+	static char recv_data_buf[buf_len];
+
+	if(input_len<0)
+	{
+		mylog(log_debug,"input_len <0\n");
+		return -1;
+	}
+	if(my_decrypt(input,recv_data_buf,input_len,key)!=0)
+	{
+		mylog(log_debug,"decrypt_fail in recv bare\n");
+		return -1;
+	}
+	if(recv_data_buf[sizeof(iv_t)+sizeof(padding_t)]!='b')
+	{
+		mylog(log_debug,"not a bare packet\n");
+		return -1;
+	}
+	len=input_len;
+	data=recv_data_buf+sizeof(iv_t)+sizeof(padding_t)+1;
+	len-=sizeof(iv_t)+sizeof(padding_t)+1;
+	if(len<0)
+	{
+		mylog(log_debug,"len <0\n");
+		return -1;
+	}
+	return 0;
+}
+int recv_bare(raw_info_t &raw_info,char* & data,int & len)//recv function with encryption but no anti replay,this is used when client and server verifys each other
+//you have to design the protocol carefully, so that you wont be affect by relay attack
+{
+	packet_info_t &send_info=raw_info.send_info;
+	packet_info_t &recv_info=raw_info.recv_info;
+
+	if(recv_raw0(raw_info,data,len)<0)
+	{
+		//printf("recv_raw_fail in recv bare\n");
+		return -1;
+	}
+	if ((raw_mode == mode_faketcp && (recv_info.syn == 1 || recv_info.ack != 1)))
+	{
+		mylog(log_debug,"unexpect packet type recv_info.syn=%d recv_info.ack=%d \n",recv_info.syn,recv_info.ack);
+		return -1;
+	}
+	return reserved_parse_bare(data,len,data,len);
+}
+
+int send_handshake(raw_info_t &raw_info,id_t id1,id_t id2,id_t id3)// a warp for send_bare for sending handshake(this is not tcp handshake) easily
+{
+	packet_info_t &send_info=raw_info.send_info;
+	packet_info_t &recv_info=raw_info.recv_info;
+
+	char * data;int len;
+	//len=sizeof(id_t)*3;
+	if(numbers_to_char(id1,id2,id3,data,len)!=0) return -1;
+	if(send_bare(raw_info,data,len)!=0) {mylog(log_warn,"send bare fail\n");return -1;}
+	return 0;
+}
+/*
+int recv_handshake(packet_info_t &info,id_t &id1,id_t &id2,id_t &id3)
+{
+	char * data;int len;
+	if(recv_bare(info,data,len)!=0) return -1;
+
+	if(char_to_numbers(data,len,id1,id2,id3)!=0) return -1;
+
+	return 0;
+}*/
+
+int send_safer(conn_info_t &conn_info,char type,const char* data,int len)  //safer transfer function with anti-replay,when mutually verification is done.
+{
+
+	packet_info_t &send_info=conn_info.raw_info.send_info;
+	packet_info_t &recv_info=conn_info.raw_info.recv_info;
+
+	if(type!='h'&&type!='d')
+	{
+		mylog(log_warn,"first byte is not h or d  ,%x\n",type);
+		return -1;
+	}
+
+
+
+	char send_data_buf[buf_len];  //buf for send data and send hb
+	char send_data_buf2[buf_len];
+
+
+
+	id_t n_tmp_id=htonl(conn_info.my_id);
+
+	memcpy(send_data_buf,&n_tmp_id,sizeof(n_tmp_id));
+
+	n_tmp_id=htonl(conn_info.oppsite_id);
+
+	memcpy(send_data_buf+sizeof(n_tmp_id),&n_tmp_id,sizeof(n_tmp_id));
+
+	anti_replay_seq_t n_seq=hton64(conn_info.blob->anti_replay.get_new_seq_for_send());
+
+	memcpy(send_data_buf+sizeof(n_tmp_id)*2,&n_seq,sizeof(n_seq));
+
+
+	send_data_buf[sizeof(n_tmp_id)*2+sizeof(n_seq)]=type;
+	send_data_buf[sizeof(n_tmp_id)*2+sizeof(n_seq)+1]=conn_info.my_roller;
+
+	memcpy(send_data_buf+2+sizeof(n_tmp_id)*2+sizeof(n_seq),data,len);//data;
+
+	int new_len=len+sizeof(n_seq)+sizeof(n_tmp_id)*2+2;
+
+	if(my_encrypt(send_data_buf,send_data_buf2,new_len,key)!=0)
+	{
+		return -1;
+	}
+
+	if(send_raw0(conn_info.raw_info,send_data_buf2,new_len)!=0) return -1;
+
+	if(after_send_raw0(conn_info.raw_info)!=0) return -1;
+
+	return 0;
+}
+int send_data_safer(conn_info_t &conn_info,const char* data,int len,u32_t conv_num)//a wrap for  send_safer for transfer data.
+{
+	packet_info_t &send_info=conn_info.raw_info.send_info;
+	packet_info_t &recv_info=conn_info.raw_info.recv_info;
+
+	char send_data_buf[buf_len];
+	//send_data_buf[0]='d';
+	u32_t n_conv_num=htonl(conv_num);
+	memcpy(send_data_buf,&n_conv_num,sizeof(n_conv_num));
+
+	memcpy(send_data_buf+sizeof(n_conv_num),data,len);
+	int new_len=len+sizeof(n_conv_num);
+	send_safer(conn_info,'d',send_data_buf,new_len);
+	return 0;
+
+}
+int parse_safer(conn_info_t &conn_info,const char * input,int input_len,char &type,char* &data,int &len)//subfunction for recv_safer,allow overlap
+{
+	 static char recv_data_buf[buf_len];
+
+	// char *recv_data_buf=recv_data_buf0; //fix strict alias warning
+	if(my_decrypt(input,recv_data_buf,input_len,key)!=0)
+	{
+		//printf("decrypt fail\n");
+		return -1;
+	}
+
+
+
+	//char *a=recv_data_buf;
+	//id_t h_oppiste_id= ntohl (  *((id_t * )(recv_data_buf)) );
+	id_t h_oppsite_id;
+	memcpy(&h_oppsite_id,recv_data_buf,sizeof(h_oppsite_id));
+	h_oppsite_id=ntohl(h_oppsite_id);
+
+	//id_t h_my_id= ntohl (  *((id_t * )(recv_data_buf+sizeof(id_t)))    );
+	id_t h_my_id;
+	memcpy(&h_my_id,recv_data_buf+sizeof(id_t),sizeof(h_my_id));
+	h_my_id=ntohl(h_my_id);
+
+	//anti_replay_seq_t h_seq= ntoh64 (  *((anti_replay_seq_t * )(recv_data_buf  +sizeof(id_t) *2 ))   );
+	anti_replay_seq_t h_seq;
+	memcpy(&h_seq,recv_data_buf  +sizeof(id_t) *2 ,sizeof(h_seq));
+	h_seq=ntoh64(h_seq);
+
+	if(h_oppsite_id!=conn_info.oppsite_id||h_my_id!=conn_info.my_id)
+	{
+		mylog(log_debug,"id and oppsite_id verification failed %x %x %x %x \n",h_oppsite_id,conn_info.oppsite_id,h_my_id,conn_info.my_id);
+		return -1;
+	}
+
+	if (conn_info.blob->anti_replay.is_vaild(h_seq) != 1) {
+		mylog(log_debug,"dropped replay packet\n");
+		return -1;
+	}
+
+	//printf("recv _len %d\n ",recv_len);
+	data=recv_data_buf+sizeof(anti_replay_seq_t)+sizeof(id_t)*2;
+	len=input_len-(sizeof(anti_replay_seq_t)+sizeof(id_t)*2  );
+
+
+	if(data[0]!='h'&&data[0]!='d')
+	{
+		mylog(log_debug,"first byte is not h or d  ,%x\n",data[0]);
+		return -1;
+	}
+
+	uint8_t roller=data[1];
+
+
+	type=data[0];
+	data+=2;
+	len-=2;
+
+	if(len<0)
+	{
+		mylog(log_debug,"len <0 ,%d\n",len);
+		return -1;
+	}
+
+	if(roller!=conn_info.oppsite_roller)
+	{
+		conn_info.oppsite_roller=roller;
+		conn_info.last_oppsite_roller_time=get_current_time();
+	}
+	if(hb_mode==0)
+		conn_info.my_roller++;//increase on a successful recv
+	else if(hb_mode==1)
+	{
+		if(type=='h')
+			conn_info.my_roller++;
+	}
+	else
+	{
+		assert(0==1);
+	}
+
+
+	if(after_recv_raw0(conn_info.raw_info)!=0) return -1;
+
+	return 0;
+}
+int recv_safer(conn_info_t &conn_info,char &type,char* &data,int &len)///safer transfer function with anti-replay,when mutually verification is done.
+{
+	packet_info_t &send_info=conn_info.raw_info.send_info;
+	packet_info_t &recv_info=conn_info.raw_info.recv_info;
+
+	char * recv_data;int recv_len;
+	static char recv_data_buf[buf_len];
+
+	if(recv_raw0(conn_info.raw_info,recv_data,recv_len)!=0) return -1;
+
+	return parse_safer(conn_info,recv_data,recv_len,type,data,len);
+}
+
+void server_clear_function(u64_t u64)//used in conv_manager in server mode.for server we have to use one udp fd for one conv(udp connection),
+//so we have to close the fd when conv expires
+{
+	//int fd=int(u64);
+//	int ret;
+	//assert(fd!=0);
+	/*
+	epoll_event ev;
+
+	ev.events = EPOLLIN;
+	ev.data.u64 = u64;
+
+	ret = epoll_ctl(epollfd, EPOLL_CTL_DEL, fd, &ev);
+	if (ret!=0)
+	{
+		mylog(log_fatal,"fd:%d epoll delete failed!!!!\n",fd);
+		myexit(-1);   //this shouldnt happen
+	}*/                //no need
+
+	/*ret= close(fd);  //closed fd should be auto removed from epoll
+
+	if (ret!=0)
+	{
+		mylog(log_fatal,"close fd %d failed !!!!\n",fd);
+		myexit(-1);  //this shouldnt happen
+	}*/
+	//mylog(log_fatal,"size:%d !!!!\n",conn_manager.udp_fd_mp.size());
+	fd64_t fd64=u64;
+	assert(fd_manager.exist(fd64));
+	fd_manager.fd64_close(fd64);
+
+	//assert(conn_manager.udp_fd_mp.find(fd)!=conn_manager.udp_fd_mp.end());
+	//conn_manager.udp_fd_mp.erase(fd);
+}

connection.h

@@ -0,0 +1,165 @@
+/*
+ * connection.h
+ *
+ *  Created on: Sep 23, 2017
+ *      Author: root
+ */
+
+#ifndef CONNECTION_H_
+#define CONNECTION_H_
+
+extern int disable_anti_replay;
+
+#include "connection.h"
+#include "common.h"
+#include "log.h"
+#include "network.h"
+#include "misc.h"
+
+
+
+struct anti_replay_t  //its for anti replay attack,similar to openvpn/ipsec 's anti replay window
+{
+	u64_t max_packet_received;
+	char window[anti_replay_window_size];
+	anti_replay_seq_t anti_replay_seq;
+	anti_replay_seq_t get_new_seq_for_send();
+	anti_replay_t();
+	void re_init();
+
+	int is_vaild(u64_t seq);
+};//anti_replay;
+
+
+struct conv_manager_t  // manage the udp connections
+{
+	//typedef hash_map map;
+	unordered_map<u64_t,u32_t> u64_to_conv;  //conv and u64 are both supposed to be uniq
+	unordered_map<u32_t,u64_t> conv_to_u64;
+
+	unordered_map<u32_t,u64_t> conv_last_active_time;
+
+	unordered_map<u32_t,u64_t>::iterator clear_it;
+
+	unordered_map<u32_t,u64_t>::iterator it;
+	unordered_map<u32_t,u64_t>::iterator old_it;
+
+	//void (*clear_function)(uint64_t u64) ;
+
+	long long last_clear_time;
+
+	conv_manager_t();
+	~conv_manager_t();
+	int get_size();
+	void reserve();
+	void clear();
+	u32_t get_new_conv();
+	int is_conv_used(u32_t conv);
+	int is_u64_used(u64_t u64);
+	u32_t find_conv_by_u64(u64_t u64);
+	u64_t find_u64_by_conv(u32_t conv);
+	int update_active_time(u32_t conv);
+	int insert_conv(u32_t conv,u64_t u64);
+	int erase_conv(u32_t conv);
+	int clear_inactive(char * ip_port=0);
+	int clear_inactive0(char * ip_port);
+};//g_conv_manager;
+
+struct blob_t  //used in conn_info_t.  conv_manager_t and anti_replay_t are costly data structures ,we dont allocate them until its necessary
+{
+	conv_manager_t conv_manager;
+	anti_replay_t anti_replay;
+};
+struct conn_info_t     //stores info for a raw connection.for client ,there is only one connection,for server there can be thousand of connection since server can
+//handle multiple clients
+{
+	current_state_t state;
+
+	raw_info_t raw_info;
+	u64_t last_state_time;
+	u64_t last_hb_sent_time;  //client re-use this for retry
+	u64_t last_hb_recv_time;
+	//long long last_resent_time;
+
+	id_t my_id;
+	id_t oppsite_id;
+
+
+	fd64_t timer_fd64;
+
+	id_t oppsite_const_id;
+
+	blob_t *blob;
+
+	uint8_t my_roller;
+	uint8_t oppsite_roller;
+	u64_t last_oppsite_roller_time;
+
+//	ip_port_t ip_port;
+
+/*
+	const uint32_t &ip=raw_info.recv_info.src_ip;
+	const uint16_t &port=raw_info.recv_info.src_port;
+
+*/
+	 void recover(const conn_info_t &conn_info);
+	void re_init();
+	conn_info_t();
+	void prepare();
+	conn_info_t(const conn_info_t&b);
+	conn_info_t& operator=(const conn_info_t& b);
+	~conn_info_t();
+};//g_conn_info;
+
+struct conn_manager_t  //manager for connections. for client,we dont need conn_manager since there is only one connection.for server we use one conn_manager for all connections
+{
+
+ u32_t ready_num;
+
+ //unordered_map<int,conn_info_t *> udp_fd_mp;  //a bit dirty to used pointer,but can void unordered_map search
+ //unordered_map<int,conn_info_t *> timer_fd_mp;//we can use pointer here since unordered_map.rehash() uses shallow copy
+
+ unordered_map<id_t,conn_info_t *> const_id_mp;
+
+ unordered_map<u64_t,conn_info_t*> mp; //put it at end so that it de-consturcts first
+
+ unordered_map<u64_t,conn_info_t*>::iterator clear_it;
+
+ long long last_clear_time;
+
+ conn_manager_t();
+ int exist(u32_t ip,uint16_t port);
+ /*
+ int insert(uint32_t ip,uint16_t port)
+ {
+	 uint64_t u64=0;
+	 u64=ip;
+	 u64<<=32u;
+	 u64|=port;
+	 mp[u64];
+	 return 0;
+ }*/
+ conn_info_t *& find_insert_p(u32_t ip,uint16_t port);  //be aware,the adress may change after rehash
+ conn_info_t & find_insert(u32_t ip,uint16_t port) ; //be aware,the adress may change after rehash
+
+ int erase(unordered_map<u64_t,conn_info_t*>::iterator erase_it);
+int clear_inactive();
+int clear_inactive0();
+
+};
+
+extern conn_manager_t conn_manager;
+
+void server_clear_function(u64_t u64);
+
+int send_bare(raw_info_t &raw_info,const char* data,int len);//send function with encryption but no anti replay,this is used when client and server verifys each other
+//you have to design the protocol carefully, so that you wont be affect by relay attack
+int reserved_parse_bare(const char *input,int input_len,char* & data,int & len); // a sub function used in recv_bare
+int recv_bare(raw_info_t &raw_info,char* & data,int & len);//recv function with encryption but no anti replay,this is used when client and server verifys each other
+//you have to design the protocol carefully, so that you wont be affect by relay attack
+int send_handshake(raw_info_t &raw_info,id_t id1,id_t id2,id_t id3);// a warp for send_bare for sending handshake(this is not tcp handshake) easily
+int send_safer(conn_info_t &conn_info,char type,const char* data,int len);  //safer transfer function with anti-replay,when mutually verification is done.
+int send_data_safer(conn_info_t &conn_info,const char* data,int len,u32_t conv_num);//a wrap for  send_safer for transfer data.
+int parse_safer(conn_info_t &conn_info,const char * input,int input_len,char &type,char* &data,int &len);//subfunction for recv_safer,allow overlap
+int recv_safer(conn_info_t &conn_info,char &type,char* &data,int &len);///safer transfer function with anti-replay,when mutually verification is done.
+#endif /* CONNECTION_H_ */

doc/README.zh-cn.md

@@ -1,25 +1,36 @@
-Udp2raw-tunnel 
-![image2](/images/image2.PNG)
+# Udp2raw-tunnel 
+![image2](/images/image0.PNG)
 udp2raw tunnel，通过raw socket给UDP包加上TCP或ICMP header，进而绕过UDP屏蔽或QoS，或在UDP不稳定的环境下提升稳定性。可以有效防止在使用kcptun或者finalspeed的情况下udp端口被运营商限速。
 
 支持心跳保活、自动重连，重连后会恢复上次连接，在底层掉线的情况下可以保持上层不掉线。同时有加密、防重放攻击、信道复用的功能。
 
-**欢迎任何形式的转载**
-
 [English](/README.md)
 
 [udp2raw+kcptun step_by_step教程](kcptun_step_by_step.md)
 
 [udp2raw+finalspeed step_by_step教程](finalspeed_step_by_step.md)
 
-如果你需要加速跨国网游、网页浏览，解决方案在另一个repo：
+**提示：**
+
+udp2raw不是加速器，只是一个帮助你绕过UDP限制的工具。如果你需要UDP加速器，请看UDPspeeder。
+
+UDPspeeder的repo:
 
 https://github.com/wangyu-/UDPspeeder
 # 支持的平台
 Linux主机，有root权限。可以是PC、android手机/平板、openwrt路由器、树莓派。主机上最好安装了iptables命令(apt/yum很容易安装)。
 
-在windows和mac上预装了udp2raw的虚拟机镜像已发布，可以用Vmware或VirtualBox加载，容量4.4mb，已经配置好了自动获取网卡ip，开机即用，稳定，性能很好。
-（udp2raw跑在虚拟机里，其他应用照常跑在windows上）（确保虚拟机网卡工作在桥接模式）（Vmware player 75mb,VirtualBox 118mb,很容易安装）。
+Release中提供了`amd64`、`x86`、`arm`、`mips_be`、`mips_le`的预编译binary.
+
+##### 对于windows和mac用户：
+
+在虚拟机中可以稳定使用（udp2raw跑在Linux里，其他应用照常跑在window里；确保虚拟机网卡工作在桥接模式）。可以使用[这个](https://github.com/wangyu-/udp2raw-tunnel/releases/download/20171108.0/lede-17.01.2-x86_virtual_machine_image.zip)虚拟机镜像，大小只有7.5mb，免去在虚拟机里装系统的麻烦；虚拟机自带ssh server，可以scp拷贝文件，可以ssh进去，可以复制粘贴，root密码123456。
+
+如果你的网络不允许桥接，也是有办法用的，具体方法请看wiki。
+
+##### 对于ios和游戏主机用户：
+
+可以把udp2raw运行在局域网的其他机器上。最好的办法是买个能刷OpenWrt/LEDE/梅林的路由器，把udp2raw运行在路由器上。
 
 # 功能特性
 ### 把udp流量伪装成tcp /icmp
@@ -49,9 +60,9 @@ NAT 穿透 ，tcp icmp udp模式都支持nat穿透。
 
 支持Openvz，配合finalspeed使用，可以在openvz上用tcp模式的finalspeed
 
-支持Openwrt，没有编译依赖，容易编译到任何平台上。release中提供了ar71xx版本的binary
+支持Openwrt，没有编译依赖，容易编译到任何平台上。
 
-epoll纯异步，高并发，除了回收过期连接外，所有操作的时间复杂度都跟连接数无关。回收过期连接的操做也是柔和进行的，不会因为消耗太多cpu时间造成延迟抖动。
+epoll实现，高并发，除了回收过期连接外，所有操作的时间复杂度都跟连接数无关。回收过期连接的操做也是柔和进行的，不会因为消耗太多cpu时间造成延迟抖动。
 
 ### 关键词
 突破udp qos,突破udp屏蔽，openvpn tcp over tcp problem,openvpn over icmp,udp to icmp tunnel,udp to tcp tunnel,udp via icmp,udp via tcp
@@ -68,11 +79,13 @@ https://github.com/wangyu-/udp2raw-tunnel/releases
 
 ```
 在server端运行:
-./udp2raw_amd64 -s -l0.0.0.0:4096 -r 127.0.0.1:7777  -a -k "passwd" --raw-mode faketcp
+./udp2raw_amd64 -s -l0.0.0.0:4096  -r127.0.0.1:7777   -a -k "passwd" --raw-mode faketcp   --cipher-mode xor
 
 在client端运行:
-./udp2raw_amd64 -c -l0.0.0.0:3333  -r44.55.66.77:4096 -a -k "passwd" --raw-mode faketcp
+./udp2raw_amd64 -c -l0.0.0.0:3333  -r44.55.66.77:4096 -a -k "passwd" --raw-mode faketcp   --cipher-mode xor
 ```
+(以上例子需要用root账号运行。 用非root运行udp2raw需要一些额外的步骤，具体方法请看 [这个](https://github.com/wangyu-/udp2raw-tunnel/wiki/run-udp2raw-as-non-root) 链接。用非root运行更安全)
+
 ###### Server端输出:
 ![](/images/output_server.PNG)
 ###### Client端输出:
@@ -80,20 +93,25 @@ https://github.com/wangyu-/udp2raw-tunnel/releases
 
 现在client和server之间建立起了，tunnel。想要在本地连接44.55.66.77:7777，只需要连接 127.0.0.1:3333。来回的所有的udp流量会被经过tunneling发送。在外界看起来是tcp流量，不会有udp流量暴露到公网。
 
+### MTU设置(重要)
+
+不论你用udp2raw来加速kcptun还是vpn,为了稳定使用,都需要设置合理的MTU（在kcptun/vpn里设置，而不是在udp2raw里），建议把MTU设置成1200。client和server端都要设置。
+
 ### 提醒
+`--cipher-mode xor`表示仅使用简单的XOR加密，这样可以节省CPU占用，以免CPU成为速度瓶颈。如果你需要更强的加密，可以去掉此选项，使用默认的AES加密。加密相关的选项见后文的`--cipher-mode`和`--auth-mode`。
+
 如果要在anroid上运行，请看[Android简明教程](/doc/android_guide.md)
 
 如果要在梅林固件的路由器上使用，添加`--lower-level auto` `--keep-rule`
 
 如果client和server无法连接，或者连接经常断开，请看一下`--seq-mode`的用法，尝试不同的seq-mode。
 
-udp2raw可以用非root账号运行，这样更安全。具体方法见：[#26](https://github.com/wangyu-/udp2raw-tunnel/issues/26) 
 # 进阶操作说明
 
 ### 命令选项
 ```
 udp2raw-tunnel
-version: Aug 26 2017 08:30:48
+git version:6e1df4b39f    build date:Oct 24 2017 09:21:15
 repository: https://github.com/wangyu-/udp2raw-tunnel
 
 usage:
@@ -116,17 +134,23 @@ client options:
 other options:
     --conf-file           <string>        read options from a configuration file instead of command line.
                                           check example.conf in repo for format
-    --log-level           <number>        0:never    1:fatal   2:error   3:warn 
+    --fifo                <string>        use a fifo(named pipe) for sending commands to the running program,
+                                          check readme.md in repository for supported commands.
+    --log-level           <number>        0:never    1:fatal   2:error   3:warn
                                           4:info (default)     5:debug   6:trace
     --log-position                        enable file name,function name,line number in log
     --disable-color                       disable log color
     --disable-bpf                         disable the kernel space filter,most time its not necessary
                                           unless you suspect there is a bug
     --sock-buf            <number>        buf size for socket,>=10 and <=10240,unit:kbyte,default:1024
-    --seqmode             <number>        seq increase mode for faketcp:
-                                          0:dont increase
-                                          1:increase every packet(default)
-                                          2:increase randomly, about every 3 packets
+    --force-sock-buf                      bypass system limitation while setting sock-buf
+    --seq-mode            <number>        seq increase mode for faketcp:
+                                          0:static header,do not increase seq and ack_seq
+                                          1:increase seq for every packet,simply ack last seq
+                                          2:increase seq randomly, about every 3 packets,simply ack last seq
+                                          3:simulate an almost real seq/ack procedure(default)
+                                          4:similiar to 3,but do not consider TCP Option Window_Scale,
+                                          maybe useful when firewall doesnt support TCP Option
     --lower-level         <string>        send packets at OSI level 2, format:'if_name#dest_mac_adress'
                                           ie:'eth0#00:23:45:67:89:b9'.or try '--lower-level auto' to obtain
                                           the parameter automatically,specify it manually if 'auto' failed
@@ -142,7 +166,7 @@ other options:
 
 用raw收发udp包也类似，只是内核回复的是icmp unreachable。而用raw 收发icmp，内核会自动回复icmp echo。都需要相应的iptables规则。
 ### `--cipher-mode` 和 `--auth-mode` 
-如果要最大的安全性建议用aes128cbc+md5。如果要运行再路由器上，建议xor+simple。但是注意xor+simple只能骗过防火墙的包检测，不能防止真正的攻击者。
+如果要最大的安全性建议用aes128cbc+md5。如果要运行在路由器上，建议用xor+simple，可以节省CPU。但是注意xor+simple只能骗过防火墙的包检测，不能防止真正的攻击者。
 
 ### `--seq-mode`
 facktcp模式并没有模拟tcp的全部。所以理论上有办法把faketcp和真正的tcp流量区分开来（虽然大部分ISP不太可能做这种程度的包检测）。seq-mode可以改变一些seq ack的行为。如果遇到了连接问题，可以尝试更改。在我这边的移动线路用3种模式都没问题。
@@ -150,6 +174,11 @@ facktcp模式并没有模拟tcp的全部。所以理论上有办法把faketcp和
 ### `--keep-rule`
 定期主动检查iptables，如果udp2raw添加的iptables规则丢了，就重新添加。在一些iptables可能会被其他程序清空的情况下(比如梅林固件和openwrt的路由器)格外有用。
 
+### `--fifo`
+指定一个fifo(named pipe)来向运行中的程序发送命令，例如`--fifo fifo.file`：
+
+在client端,可以用`echo reconnect >fifo.file`来强制client换端口重连（上层不断线）.对Server，目前没有效果。
+
 ### `--lower-level`
 大部分udp2raw不能连通的情况都是设置了不兼容的iptables造成的。--lower-level选项允许绕过本地iptables。在一些iptables不好改动的情况下尤其有效（比如你用的是梅林固件，iptables全是固件自己生成的）。
 

doc/build_guide.md

@@ -1,8 +1,10 @@
 # udp2raw build guide
 
-the guide on how to build udp2raw to you own platform
+the guide on how to build udp2raw
 
-## linux platform which supports local compile
+## Build udp2raw for a specific platform
+
+### linux platform which supports local compile
 such as PC,raspberry pi
 
 ##### install git
@@ -36,7 +38,7 @@ sudo yum groupinstall 'Development Tools'
 
 run 'make'，compilation done. the udp2raw file is the just compiled binary
 
-## platform which needs cross-compile
+### platform which needs cross-compile
 such as openwrt router,run following instructions on your PC
 
 ##### install git
@@ -74,3 +76,17 @@ cc_cross=/home/wangyu/Desktop/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uC
 run `make cross`，the just generated `udp2raw_cross` is the binary,compile done. copy it to your router to run.
 
 `make cross` generates non-static binary. If you have any problem on running it,try to compile a static binary by using `make cross2` or `make cross3`.If your toolchain supports static compiling, usually one of them will succeed. The generated file is still named `udp2raw_cross`.
+
+
+
+## Build a full release (include all binaries supported in the makefile)
+
+1. make sure your linux is amd64 version
+
+2. clone the repo
+
+3. make sure you have g++ , make sure your g++ support the `-m32` option; make your your have installed libraries for `-m32` option
+
+4. download https://github.com/wangyu-/files/releases/download/files/toolchains.tar.gz , and extract it to the right position (according to the makefile)
+
+5. run `make release` inside udp2raw's directory

doc/finalspeed_step_by_step.md

@@ -8,7 +8,7 @@
 ##### 摘要
 udp2raw是一个把udp流量通过raw socket包装成tcp流量的工具。通过用udp2raw配合udp模式的 finalspeed一样可以达到在底层发tcp包，绕过QOS的效果。支持openvz,稳定性也好很多。原理上相当于在finalspeed外面再包了一层tunnel。
 
-本教程会一步一步演示用udp2raw+finalspeed加速http流量的过程。加速任何其他tcp流量也一样，包括ss。本文避免讨论科学上网，所以只演示加速http流量。
+本教程会一步一步演示用udp2raw+finalspeed加速http流量的过程。加速任何其他tcp流量也一样，包括$\*\*\*。本文避免讨论科学上网，所以只演示加速http流量。
 
 udp2raw也支持把udp流量包装成Icmp发送，本教程不做演示。
 

doc/kcptun_step_by_step.md

@@ -1,7 +1,7 @@
 # udp2raw+kcptun 加速tcp流量 Step by Step 教程
 ![image](kcptun_step_by_step/Capture00.PNG)
 
-本教程会一步一步演示用udp2raw+kcptun加速SSH流量的过程。加速任何其他tcp流量也一样，包括ss；本文避免涉及科学上网，所以演示ssh。
+本教程会一步一步演示用udp2raw+kcptun加速SSH流量的过程。加速任何其他tcp流量也一样，包括$\*\*\*；本文避免涉及科学上网，所以演示ssh。
 
 ### 环境要求
 两边的主机都是linux，有root权限。 可以是openwrt路由器或树莓派，也可以是root了的android。

doc/openvpn_guide.md

@@ -11,7 +11,7 @@
 #### run at client side
 assume server ip is 45.66.77.88
 ```
-./udp2raw_amd64 -s -l0.0.0.0:3333 -r 45.66.77.88:8855 -k "passwd" --raw-mode faketcp -a
+./udp2raw_amd64 -c -l0.0.0.0:3333 -r 45.66.77.88:8855 -k "passwd" --raw-mode faketcp -a
 ```
 
 #### hint

encrypt.cpp

@@ -16,7 +16,7 @@ static int8_t zero_iv[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,   0,0,0,0};//this prog
  * https://crypto.stackexchange.com/questions/5421/using-cbc-with-a-fixed-iv-and-a-random-first-plaintext-block
 ****/
 
-
+char key[16];//generated from key_string by md5.
 /*
 TODO
 
@@ -208,6 +208,13 @@ int de_padding(const char *data ,int &data_len,int padding_num)
 }
 int cipher_aes128cbc_encrypt(const char *data,char *output,int &len,char * key)
 {
+	static int first_time=1;
+	if(aes_key_optimize)
+	{
+		if(first_time==0) key=0;
+		else first_time=0;
+	}
+
 	char buf[buf_len];
 	memcpy(buf,data,len);//TODO inefficient code
 
@@ -253,7 +260,12 @@ int cipher_none_encrypt(const char *data,char *output,int &len,char * key)
 }
 int cipher_aes128cbc_decrypt(const char *data,char *output,int &len,char * key)
 {
-
+	static int first_time=1;
+	if(aes_key_optimize)
+	{
+		if(first_time==0) key=0;
+		else first_time=0;
+	}
 	if(len%16 !=0) {mylog(log_debug,"len%%16!=0\n");return -1;}
 	//if(len<0) {mylog(log_debug,"len <0\n");return -1;}
 	AES_CBC_decrypt_buffer((unsigned char *)output,(unsigned char *)data,len,(unsigned char *)key,(unsigned char *)zero_iv);

encrypt.h

@@ -10,6 +10,10 @@
 
 //using namespace std;
 
+
+const int aes_key_optimize=1; //if enabled,once you used a key for aes,you cant change it anymore
+extern char key[16];
+
 int my_encrypt(const char *data,char *output,int &len,char * key);
 int my_decrypt(const char *data,char *output,int &len,char * key);
 
@@ -32,4 +36,10 @@ extern cipher_mode_t cipher_mode;
 extern unordered_map<int, const char *> auth_mode_tostring;
 extern unordered_map<int, const char *> cipher_mode_tostring;
 
+
+
+
+int cipher_decrypt(const char *data,char *output,int &len,char * key);//internal interface ,exposed for test only
+int cipher_encrypt(const char *data,char *output,int &len,char * key);//internal interface ,exposed for test only
+
 #endif

fd_manager.cpp

@@ -0,0 +1,63 @@
+/*
+ * fd_manager.cpp
+ *
+ *  Created on: Sep 25, 2017
+ *      Author: root
+ */
+
+
+#include "fd_manager.h"
+int fd_manager_t::fd_exist(int fd)
+{
+	return fd_to_fd64_mp.find(fd)!=fd_to_fd64_mp.end();
+}
+int fd_manager_t::exist(fd64_t fd64)
+{
+	return fd64_to_fd_mp.find(fd64)!=fd64_to_fd_mp.end();
+}
+int fd_manager_t::to_fd(fd64_t fd64)
+{
+	assert(exist(fd64));
+	return fd64_to_fd_mp[fd64];
+}
+void fd_manager_t::fd64_close(fd64_t fd64)
+{
+	assert(exist(fd64));
+	int fd=fd64_to_fd_mp[fd64];
+	fd64_to_fd_mp.erase(fd64);
+	fd_to_fd64_mp.erase(fd);
+	if(exist_info(fd64))
+	{
+		fd_info_mp.erase(fd64);
+	}
+	assert(close(fd)==0);
+}
+void fd_manager_t::reserve(int n)
+{
+	fd_to_fd64_mp.reserve(n);
+	fd64_to_fd_mp.reserve(n);
+	fd_info_mp.reserve(n);
+}
+u64_t fd_manager_t::create(int fd)
+{
+	assert(!fd_exist(fd));
+	fd64_t fd64=counter++;
+	fd_to_fd64_mp[fd]=fd64;
+	fd64_to_fd_mp[fd64]=fd;
+	return fd64;
+}
+fd_manager_t::fd_manager_t()
+{
+	counter=u32_t(-1);
+	counter+=100;
+	reserve(10007);
+}
+fd_info_t & fd_manager_t::get_info(fd64_t fd64)
+{
+	assert(exist(fd64));
+	return fd_info_mp[fd64];
+}
+int fd_manager_t::exist_info(fd64_t fd64)
+{
+	return fd_info_mp.find(fd64)!=fd_info_mp.end();
+}

fd_manager.h

@@ -0,0 +1,43 @@
+/*
+ * fd_manager.h
+ *
+ *  Created on: Sep 25, 2017
+ *      Author: root
+ */
+
+#ifndef FD_MANAGER_H_
+#define FD_MANAGER_H_
+
+#include "common.h"
+//#include "packet.h"
+#include "connection.h"
+
+struct fd_info_t
+{
+	//ip_port_t ip_port;
+	conn_info_t *p_conn_info;
+};
+
+struct fd_manager_t   //conver fd to a uniq 64bit number,avoid fd value conflict caused by close and re-create
+//this class is not strictly necessary,it just makes epoll fd handling easier
+{
+	fd_info_t & get_info(fd64_t fd64);
+	int exist_info(fd64_t);
+	int exist(fd64_t fd64);
+	int to_fd(fd64_t);
+	void fd64_close(fd64_t fd64);
+	void reserve(int n);
+	u64_t create(int fd);
+	fd_manager_t();
+private:
+	u64_t counter;
+	unordered_map<int,fd64_t> fd_to_fd64_mp;
+	unordered_map<fd64_t,int> fd64_to_fd_mp;
+	unordered_map<fd64_t,fd_info_t> fd_info_mp;
+	int fd_exist(int fd);
+	//void remove_fd(int fd);
+	//fd64_t fd_to_fd64(int fd);
+};
+
+extern fd_manager_t fd_manager;
+#endif /* FD_MANAGER_H_ */

images/wiki/111

@@ -0,0 +1 @@
+

lib/aes_acc/aesacc.c

@@ -340,30 +340,34 @@ int AES_support_hwaccel(void)
 void AES_CBC_encrypt_buffer(uint8_t* output, uint8_t* input, uint32_t length, const uint8_t* key, const uint8_t* iv)
 {
   uint8_t iv_tmp[16];
-  uint8_t rk[AES_RKSIZE];
+  static uint8_t rk[AES_RKSIZE];
 
-  if (key == NULL || iv == NULL)
+  if (iv == NULL)
   {
     return;
   }
   aeshw_init();
   memcpy(iv_tmp, iv, 16);
-  setkey_enc(rk, key);
+  if(key!= NULL)
+	  setkey_enc(rk, key);
   encrypt_cbc(rk, length, iv_tmp, input, output);
 }
 
 void AES_CBC_decrypt_buffer(uint8_t* output, uint8_t* input, uint32_t length, const uint8_t* key, const uint8_t* iv)
 {
   uint8_t iv_tmp[16];
-  uint8_t rk[AES_RKSIZE];
+  static uint8_t rk[AES_RKSIZE];
 
-  if (key == NULL || iv == NULL)
+  if (iv == NULL)
   {
     return;
   }
   aeshw_init();
   memcpy(iv_tmp, iv, 16);
-  setkey_dec(rk, key);
+  if(key!= NULL)
+  {
+	  setkey_dec(rk, key);
+  }
   decrypt_cbc(rk, length, iv_tmp, input, output);
 }
 

lib/aes_faster_c/aes.h

@@ -0,0 +1,267 @@
+/**
+ * \file aes.h
+ *
+ * \brief AES block cipher
+ *
+ *  Copyright (C) 2006-2014, Brainspark B.V.
+ *
+ *  This file is part of PolarSSL (http://www.polarssl.org)
+ *  Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
+ *
+ *  All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef POLARSSL_AES_H
+#define POLARSSL_AES_H
+/*
+#if !defined(POLARSSL_CONFIG_FILE)
+#include "config.h"
+#else
+#include POLARSSL_CONFIG_FILE
+#endif
+*/
+
+////////modification begin
+#define POLARSSL_AES_ROM_TABLES
+#define POLARSSL_CIPHER_MODE_CBC
+//#define POLARSSL_SELF_TEST
+#define polarssl_printf printf
+///////add end
+
+
+
+#include <string.h>
+
+#if defined(_MSC_VER) && !defined(EFIX64) && !defined(EFI32)
+#include <basetsd.h>
+typedef UINT32 uint32_t;
+#else
+#include <inttypes.h>
+#endif
+
+/* padlock.c and aesni.c rely on these values! */
+#define AES_ENCRYPT     1
+#define AES_DECRYPT     0
+
+#define POLARSSL_ERR_AES_INVALID_KEY_LENGTH                -0x0020  /**< Invalid key length. */
+#define POLARSSL_ERR_AES_INVALID_INPUT_LENGTH              -0x0022  /**< Invalid data input length. */
+
+#if !defined(POLARSSL_AES_ALT)
+// Regular implementation
+//
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          AES context structure
+ *
+ * \note           buf is able to hold 32 extra bytes, which can be used:
+ *                 - for alignment purposes if VIA padlock is used, and/or
+ *                 - to simplify key expansion in the 256-bit case by
+ *                 generating an extra round key
+ */
+typedef struct
+{
+    int nr;                     /*!<  number of rounds  */
+    uint32_t *rk;               /*!<  AES round keys    */
+    uint32_t buf[68];           /*!<  unaligned data    */
+}
+aes_context;
+
+/**
+ * \brief          Initialize AES context
+ *
+ * \param ctx      AES context to be initialized
+ */
+void aes_init( aes_context *ctx );
+
+/**
+ * \brief          Clear AES context
+ *
+ * \param ctx      AES context to be cleared
+ */
+void aes_free( aes_context *ctx );
+
+/**
+ * \brief          AES key schedule (encryption)
+ *
+ * \param ctx      AES context to be initialized
+ * \param key      encryption key
+ * \param keysize  must be 128, 192 or 256
+ *
+ * \return         0 if successful, or POLARSSL_ERR_AES_INVALID_KEY_LENGTH
+ */
+int aes_setkey_enc( aes_context *ctx, const unsigned char *key,
+                    unsigned int keysize );
+
+/**
+ * \brief          AES key schedule (decryption)
+ *
+ * \param ctx      AES context to be initialized
+ * \param key      decryption key
+ * \param keysize  must be 128, 192 or 256
+ *
+ * \return         0 if successful, or POLARSSL_ERR_AES_INVALID_KEY_LENGTH
+ */
+int aes_setkey_dec( aes_context *ctx, const unsigned char *key,
+                    unsigned int keysize );
+
+/**
+ * \brief          AES-ECB block encryption/decryption
+ *
+ * \param ctx      AES context
+ * \param mode     AES_ENCRYPT or AES_DECRYPT
+ * \param input    16-byte input block
+ * \param output   16-byte output block
+ *
+ * \return         0 if successful
+ */
+int aes_crypt_ecb( aes_context *ctx,
+                    int mode,
+                    const unsigned char input[16],
+                    unsigned char output[16] );
+
+#if defined(POLARSSL_CIPHER_MODE_CBC)
+/**
+ * \brief          AES-CBC buffer encryption/decryption
+ *                 Length should be a multiple of the block
+ *                 size (16 bytes)
+ *
+ * \param ctx      AES context
+ * \param mode     AES_ENCRYPT or AES_DECRYPT
+ * \param length   length of the input data
+ * \param iv       initialization vector (updated after use)
+ * \param input    buffer holding the input data
+ * \param output   buffer holding the output data
+ *
+ * \return         0 if successful, or POLARSSL_ERR_AES_INVALID_INPUT_LENGTH
+ */
+int aes_crypt_cbc( aes_context *ctx,
+                    int mode,
+                    size_t length,
+                    unsigned char iv[16],
+                    const unsigned char *input,
+                    unsigned char *output );
+#endif /* POLARSSL_CIPHER_MODE_CBC */
+
+#if defined(POLARSSL_CIPHER_MODE_CFB)
+/**
+ * \brief          AES-CFB128 buffer encryption/decryption.
+ *
+ * Note: Due to the nature of CFB you should use the same key schedule for
+ * both encryption and decryption. So a context initialized with
+ * aes_setkey_enc() for both AES_ENCRYPT and AES_DECRYPT.
+ *
+ * \param ctx      AES context
+ * \param mode     AES_ENCRYPT or AES_DECRYPT
+ * \param length   length of the input data
+ * \param iv_off   offset in IV (updated after use)
+ * \param iv       initialization vector (updated after use)
+ * \param input    buffer holding the input data
+ * \param output   buffer holding the output data
+ *
+ * \return         0 if successful
+ */
+int aes_crypt_cfb128( aes_context *ctx,
+                       int mode,
+                       size_t length,
+                       size_t *iv_off,
+                       unsigned char iv[16],
+                       const unsigned char *input,
+                       unsigned char *output );
+
+/**
+ * \brief          AES-CFB8 buffer encryption/decryption.
+ *
+ * Note: Due to the nature of CFB you should use the same key schedule for
+ * both encryption and decryption. So a context initialized with
+ * aes_setkey_enc() for both AES_ENCRYPT and AES_DECRYPT.
+ *
+ * \param ctx      AES context
+ * \param mode     AES_ENCRYPT or AES_DECRYPT
+ * \param length   length of the input data
+ * \param iv       initialization vector (updated after use)
+ * \param input    buffer holding the input data
+ * \param output   buffer holding the output data
+ *
+ * \return         0 if successful
+ */
+int aes_crypt_cfb8( aes_context *ctx,
+                    int mode,
+                    size_t length,
+                    unsigned char iv[16],
+                    const unsigned char *input,
+                    unsigned char *output );
+#endif /*POLARSSL_CIPHER_MODE_CFB */
+
+#if defined(POLARSSL_CIPHER_MODE_CTR)
+/**
+ * \brief               AES-CTR buffer encryption/decryption
+ *
+ * Warning: You have to keep the maximum use of your counter in mind!
+ *
+ * Note: Due to the nature of CTR you should use the same key schedule for
+ * both encryption and decryption. So a context initialized with
+ * aes_setkey_enc() for both AES_ENCRYPT and AES_DECRYPT.
+ *
+ * \param ctx           AES context
+ * \param length        The length of the data
+ * \param nc_off        The offset in the current stream_block (for resuming
+ *                      within current cipher stream). The offset pointer to
+ *                      should be 0 at the start of a stream.
+ * \param nonce_counter The 128-bit nonce and counter.
+ * \param stream_block  The saved stream-block for resuming. Is overwritten
+ *                      by the function.
+ * \param input         The input data stream
+ * \param output        The output data stream
+ *
+ * \return         0 if successful
+ */
+int aes_crypt_ctr( aes_context *ctx,
+                       size_t length,
+                       size_t *nc_off,
+                       unsigned char nonce_counter[16],
+                       unsigned char stream_block[16],
+                       const unsigned char *input,
+                       unsigned char *output );
+#endif /* POLARSSL_CIPHER_MODE_CTR */
+
+#ifdef __cplusplus
+}
+#endif
+
+#else  /* POLARSSL_AES_ALT */
+#include "aes_alt.h"
+#endif /* POLARSSL_AES_ALT */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          Checkup routine
+ *
+ * \return         0 if successful, or 1 if the test failed
+ */
+int aes_self_test( int verbose );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* aes.h */

lib/aes_faster_c/wrapper.c

@@ -0,0 +1,56 @@
+#include "aes.h"
+#include <stdio.h>
+#include <stdlib.h>
+
+#if defined(AES256) && (AES256 == 1)
+#define AES_KEYSIZE 256
+#elif defined(AES192) && (AES192 == 1)
+#define AES_KEYSIZE 192
+#else
+#define AES_KEYSIZE 128
+#endif
+
+
+void AES_ECB_encrypt(const uint8_t* input, const uint8_t* key, uint8_t *output, const uint32_t length)
+{
+	printf("AES_ECB_encrypt not implemented\n");
+	exit(-1);
+}
+void AES_ECB_decrypt(const uint8_t* input, const uint8_t* key, uint8_t *output, const uint32_t length)
+{
+	printf("AES_ECB_encrypt not implemented\n");
+	exit(-1);
+}
+
+void AES_CBC_encrypt_buffer(uint8_t* output, uint8_t* input, uint32_t length, const uint8_t* key, const uint8_t* iv)
+{
+	static aes_context ctx;
+	static int done=0;
+	if(done==0)
+	{
+		aes_init( &ctx);
+		done=1;
+	}
+
+	char tmp_iv[16];
+	if(key!=0) aes_setkey_enc(&ctx,key,AES_KEYSIZE);
+	memcpy(tmp_iv,iv,16);
+	aes_crypt_cbc( &ctx, AES_ENCRYPT, length, (unsigned char* )tmp_iv, (const unsigned char*)input,(unsigned char*) output );
+	return ;
+}
+void AES_CBC_decrypt_buffer(uint8_t* output, uint8_t* input, uint32_t length, const uint8_t* key, const uint8_t* iv)
+{
+	static aes_context ctx;
+	static int done=0;
+	if(done==0)
+	{
+		aes_init( &ctx);
+		done=1;
+	}
+
+	char tmp_iv[16];
+	if(key!=0) aes_setkey_dec(&ctx,key,AES_KEYSIZE);
+	memcpy(tmp_iv,iv,16);
+	aes_crypt_cbc( &ctx,AES_DECRYPT, length, (unsigned char*)tmp_iv, (const unsigned char*)input, (unsigned char*) output );
+	return;
+}

lib/md5.c

@@ -302,11 +302,15 @@ void md5_finish( md5_context *ctx, unsigned char output[16] )
  */
 void md5( const unsigned char *input, size_t ilen, unsigned char output[16] )
 {
-    md5_context ctx;
-
-    md5_init( &ctx );
+    static md5_context ctx;
+    static int done=0;
+    if(done==0)
+    {
+        md5_init( &ctx );
+    	done=1;
+    }
     md5_starts( &ctx );
     md5_update( &ctx, input, ilen );
     md5_finish( &ctx, output );
-    md5_free( &ctx );
+    //md5_free( &ctx );
 }

log.cpp

@@ -1,11 +1,11 @@
 #include "log.h"
+#include "misc.h"
 
 int log_level=log_info;
 
 int enable_log_position=0;
 int enable_log_color=1;
 
-
 void log0(const char * file,const char * function,int line,int level,const char* str, ...) {
 
 	if(level>log_level) return ;

log.h

@@ -3,7 +3,8 @@
 #define UDP2RAW_LOG_MYLOG_H_
 
 
-#include<common.h>
+#include "common.h"
+
 
 using namespace std;
 

makefile

@@ -1,17 +1,23 @@
 cc_cross=/home/wangyu/Desktop/arm-2014.05/bin/arm-none-linux-gnueabi-g++
 cc_local=g++
-cc_mips34kc=/toolchains/OpenWrt-SDK-ar71xx-for-linux-x86_64-gcc-4.8-linaro_uClibc-0.9.33.2/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/mips-openwrt-linux-g++
+#cc_local=/opt/cross/x86_64-linux-musl/bin/x86_64-linux-musl-g++
+#cc_mips34kc=/toolchains/OpenWrt-SDK-ar71xx-for-linux-x86_64-gcc-4.8-linaro_uClibc-0.9.33.2/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/mips-openwrt-linux-g++
+cc_mips24kc_be=/toolchains/lede-sdk-17.01.2-ar71xx-generic_gcc-5.4.0_musl-1.1.16.Linux-x86_64/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl-1.1.16/bin/mips-openwrt-linux-musl-g++
+cc_mips24kc_le=/toolchains/lede-sdk-17.01.2-ramips-mt7621_gcc-5.4.0_musl-1.1.16.Linux-x86_64/staging_dir/toolchain-mipsel_24kc_gcc-5.4.0_musl-1.1.16/bin/mipsel-openwrt-linux-musl-g++
 #cc_arm= /toolchains/gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabi/bin/arm-linux-gnueabi-g++ -march=armv6 -marm 
 cc_arm= /toolchains/arm-2014.05/bin/arm-none-linux-gnueabi-g++
+#cc_arm=/toolchains/lede-sdk-17.01.2-brcm2708-bcm2708_gcc-5.4.0_musl-1.1.16_eabi.Linux-x86_64/staging_dir/toolchain-arm_arm1176jzf-s+vfp_gcc-5.4.0_musl-1.1.16_eabi/bin/arm-openwrt-linux-muslgnueabi-g++
 #cc_bcm2708=/home/wangyu/raspberry/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf-g++ 
 FLAGS= -std=c++11 -Wall -Wextra -Wno-unused-variable -Wno-unused-parameter -Wno-missing-field-initializers
 
-SOURCES=main.cpp lib/aes.c lib/md5.c encrypt.cpp log.cpp network.cpp common.cpp  -lpthread
-SOURCES_AES_ACC=$(filter-out lib/aes.c,$(SOURCES)) $(wildcard lib/aes_acc/aes*.c)
+COMMON=main.cpp lib/md5.c encrypt.cpp log.cpp network.cpp common.cpp  connection.cpp misc.cpp fd_manager.cpp -lpthread
+SOURCES= $(COMMON) lib/aes_faster_c/aes.c lib/aes_faster_c/wrapper.c
+SOURCES_TINY_AES= $(COMMON) lib/aes.c
+SOURCES_AES_ACC=$(COMMON) $(wildcard lib/aes_acc/aes*.c)
 
 NAME=udp2raw
-TARGETS=amd64 mips34kc arm amd64_hw_aes arm_asm_aes mips34kc_asm_aes x86 x86_asm_aes
-TAR=${NAME}_binaries.tar.gz `echo ${TARGETS}|sed -r 's/([^ ]+)/udp2raw_\1/g'`
+TARGETS=amd64 arm amd64_hw_aes arm_asm_aes mips24kc_be mips24kc_be_asm_aes x86 x86_asm_aes mips24kc_le mips24kc_le_asm_aes
+TAR=${NAME}_binaries.tar.gz `echo ${TARGETS}|sed -r 's/([^ ]+)/udp2raw_\1/g'` version.txt
 
 all:git_version
 	rm -f ${NAME}
@@ -26,16 +32,27 @@ debug2: git_version
 	rm -f ${NAME}
 	${cc_local}   -o ${NAME}          -I. ${SOURCES} ${FLAGS} -lrt -Wformat-nonliteral -ggdb
 
-mips34kc: git_version
-	${cc_mips34kc}  -o ${NAME}_$@   -I. ${SOURCES} ${FLAGS} -lrt -lgcc_eh -static -O3
+dynamic: git_version
+	${cc_local}   -o ${NAME}_$@          -I. ${SOURCES} ${FLAGS} -lrt -O3
 
-mips34kc_asm_aes: git_version
-	${cc_mips34kc}  -o ${NAME}_$@   -I. ${SOURCES_AES_ACC} ${FLAGS} -lrt -lgcc_eh -static -O3 lib/aes_acc/asm/mips_be.S
+mips24kc_be: git_version
+	${cc_mips24kc_be}  -o ${NAME}_$@   -I. ${SOURCES} ${FLAGS} -lrt -lgcc_eh -static -O3
+mips24kc_be_asm_aes: git_version
+	${cc_mips24kc_be}  -o ${NAME}_$@   -I. ${SOURCES_AES_ACC} ${FLAGS} -lrt -lgcc_eh -static -O3 lib/aes_acc/asm/mips_be.S
+
+mips24kc_le: git_version
+	${cc_mips24kc_le}  -o ${NAME}_$@   -I. ${SOURCES} ${FLAGS} -lrt -lgcc_eh -static -O3
+mips24kc_le_asm_aes: git_version
+	${cc_mips24kc_le}  -o ${NAME}_$@   -I. ${SOURCES_AES_ACC} ${FLAGS} -lrt -lgcc_eh -static -O3 lib/aes_acc/asm/mips.S
 
 #bcm2708:
 #	${cc_bcm2708} -o ${NAME}_bcm2708  -I. ${SOURCES} ${FLAGS} -lrt -static -O3
 amd64:git_version
 	${cc_local}   -o ${NAME}_$@    -I. ${SOURCES} ${FLAGS} -lrt -static -O3
+
+amd64_perf:git_version
+	${cc_local}   -o ${NAME}_$@    -I. ${SOURCES} ${FLAGS} -lrt -static -O0 -fno-omit-frame-pointer -g
+
 amd64_hw_aes:git_version
 	${cc_local}   -o ${NAME}_$@   -I. ${SOURCES_AES_ACC} ${FLAGS} -lrt -static -O3 lib/aes_acc/asm/x64.S
 x86:git_version
@@ -45,6 +62,9 @@ x86_asm_aes:git_version
 arm:git_version
 	${cc_arm}   -o ${NAME}_$@      -I. ${SOURCES} ${FLAGS} -lrt -static -O3
 
+arm_perf:git_version
+	${cc_arm}   -o ${NAME}_$@      -I. ${SOURCES} ${FLAGS} -lrt -static -mapcs-frame -fno-omit-frame-pointer -g -O0 -lgcc_eh
+
 arm_asm_aes:git_version
 	${cc_arm}   -o ${NAME}_$@    -I. ${SOURCES_AES_ACC} ${FLAGS} -lrt -static -O3 lib/aes_acc/asm/arm.S
 
@@ -58,11 +78,12 @@ cross3:git_version
 	${cc_cross}   -o ${NAME}_cross    -I. ${SOURCES} ${FLAGS} -lrt -static -O3
 
 release: ${TARGETS} 
+	cp git_version.h version.txt
 	tar -zcvf ${TAR}
 
 clean:	
 	rm -f ${TAR}
-	rm -f udp2raw udp2raw_cross udp2raw_cmake
+	rm -f udp2raw udp2raw_cross udp2raw_cmake udp2raw_dynamic
 	rm -f git_version.h
 
 git_version:

misc.h

@@ -0,0 +1,132 @@
+/*
+ * misc.h
+ *
+ *  Created on: Sep 23, 2017
+ *      Author: root
+ */
+
+#ifndef MISC_H_
+#define MISC_H_
+
+
+#include "common.h"
+#include "log.h"
+#include "network.h"
+
+extern int hb_mode;
+extern int hb_len;
+extern int mtu_warn;
+
+const u32_t max_handshake_conn_num=10000;
+const u32_t max_ready_conn_num=1000;
+const u32_t anti_replay_window_size=4000;
+const int max_conv_num=10000;
+
+const u32_t client_handshake_timeout=5000;//unit ms
+const u32_t client_retry_interval=1000;//ms
+
+const u32_t server_handshake_timeout=client_handshake_timeout+5000;// this should be longer than clients. client retry initially ,server retry passtively
+
+const int conv_clear_ratio=30;  //conv grabage collecter check 1/30 of all conv one time
+const int conn_clear_ratio=50;
+const int conv_clear_min=1;
+const int conn_clear_min=1;
+
+const u32_t conv_clear_interval=1000;//ms
+const u32_t conn_clear_interval=1000;//ms
+
+
+const i32_t max_fail_time=0;//disable
+
+const u32_t heartbeat_interval=600;//ms
+
+const u32_t timer_interval=400;//ms. this should be smaller than heartbeat_interval and retry interval;
+
+const uint32_t conv_timeout=180000; //ms. 120 second
+//const u32_t conv_timeout=30000; //for test
+
+const u32_t client_conn_timeout=10000;//ms.
+const u32_t client_conn_uplink_timeout=client_conn_timeout+2000;//ms
+
+const uint32_t server_conn_timeout=conv_timeout+60000;//ms. this should be 60s+ longer than conv_timeout,so that conv_manager can destruct convs gradually,to avoid latency glicth
+//const u32_t server_conn_timeout=conv_timeout+10000;//for test
+
+const u32_t iptables_rule_keep_interval=20;//unit: second;
+
+enum server_current_state_t {server_idle=0,server_handshake1,server_ready};  //server state machine
+enum client_current_state_t {client_idle=0,client_tcp_handshake,client_handshake1,client_handshake2,client_ready};//client state machine
+
+enum raw_mode_t{mode_faketcp=0,mode_udp,mode_icmp,mode_end};
+enum program_mode_t {unset_mode=0,client_mode,server_mode};
+
+union current_state_t
+{
+	server_current_state_t server_current_state;
+	client_current_state_t client_current_state;
+};
+
+extern char local_ip[100], remote_ip[100],source_ip[100];//local_ip is for -l option,remote_ip for -r option,source for --source-ip
+extern u32_t local_ip_uint32,remote_ip_uint32,source_ip_uint32;//convert from last line.
+extern int local_port , remote_port,source_port;//similiar to local_ip  remote_ip,buf for port.source_port=0 indicates --source-port is not enabled
+
+extern int force_source_ip; //if --source-ip is enabled
+
+extern id_t const_id;//an id used for connection recovery,its generated randomly,it never change since its generated
+
+extern int udp_fd;  //for client only. client use this fd to listen and handle udp connection
+extern int bind_fd; //bind only,never send or recv.  its just a dummy fd for bind,so that other program wont occupy the same port
+extern int epollfd; //fd for epoll
+extern int timer_fd;   //the general timer fd for client and server.for server this is not the only timer find,every connection has a timer fd.
+extern int fail_time_counter;//determine if the max_fail_time is reached
+extern int epoll_trigger_counter;//for debug only
+extern int debug_flag;//for debug only
+
+
+extern int simple_rule;  //deprecated.
+extern int keep_rule; //whether to monitor the iptables rule periodly,re-add if losted
+extern int auto_add_iptables_rule;//if -a is set
+extern int generate_iptables_rule;//if -g is set
+extern int generate_iptables_rule_add;// if --gen-add is set
+
+extern int debug_resend; // debug only
+
+extern char key_string[1000];// -k option
+extern char fifo_file[1000];
+
+
+extern raw_mode_t raw_mode;
+
+extern program_mode_t program_mode;
+extern unordered_map<int, const char*> raw_mode_tostring ;
+
+extern int about_to_exit;
+
+extern int socket_buf_size;
+extern int force_socket_buf;
+
+extern pthread_t keep_thread;
+extern int keep_thread_running;
+
+
+int process_lower_level_arg();
+void print_help();
+void iptables_rule();
+void pre_process_arg(int argc, char *argv[]);//mainly for load conf file;
+int unit_test();
+int set_timer(int epollfd,int &timer_fd);
+int set_timer_server(int epollfd,int &timer_fd,fd64_t &fd64);
+int handle_lower_level(raw_info_t &raw_info);
+
+int add_iptables_rule(const char *);
+
+int clear_iptables_rule();
+
+int iptables_gen_add(const char * s,u32_t const_id);
+int iptables_rule_init(const char * s,u32_t const_id,int keep);
+int keep_iptables_rule();
+
+
+
+void  signal_handler(int sig);
+
+#endif /* MISC_H_ */

network.cpp

@@ -7,6 +7,7 @@
 #include "common.h"
 #include "network.h"
 #include "log.h"
+#include "misc.h"
 
 int raw_recv_fd=-1;
 int raw_send_fd=-1;
@@ -14,6 +15,7 @@ u32_t link_level_header_len=0;//set it to 14 if SOCK_RAW is used in socket(PF_PA
 
 int seq_mode=3;
 int max_seq_mode=4;
+int random_drop=0;
 
 int filter_port=-1;
 
@@ -1622,6 +1624,12 @@ int recv_raw_tcp_deprecated(packet_info_t &info,char * &payload,int &payloadlen)
 }*/
 int send_raw0(raw_info_t &raw_info,const char * payload,int payloadlen)
 {
+	if (random_drop != 0) {
+		if (get_true_random_number() % 10000 < (u32_t) random_drop) {
+			return 0;
+		}
+	}
+
 	packet_info_t &send_info=raw_info.send_info;
 	packet_info_t &recv_info=raw_info.recv_info;
 	mylog(log_trace,"send_raw : from %x %d  to %x %d\n",send_info.src_ip,send_info.src_port,send_info.dst_ip,send_info.dst_port);
@@ -1687,12 +1695,12 @@ int after_send_raw0(raw_info_t &raw_info)
 				{
 					send_info.seq=raw_info.recv_info.ack_seq;
 				}
-				if(recv_info.ack_seq_counter>=3)
+				if(recv_info.ack_seq_counter>=3) //simulate tcp fast re-transmit
 				{
 					recv_info.ack_seq_counter=0;
 					send_info.seq=raw_info.recv_info.ack_seq;
 				}
-				if(larger_than_u32(raw_info.recv_info.ack_seq,send_info.seq))  //for further use,currently not useful.
+				if(larger_than_u32(raw_info.recv_info.ack_seq,send_info.seq))  //for further use,currently no effect.
 				{
 					send_info.seq=raw_info.recv_info.ack_seq;
 				}
@@ -1772,3 +1780,96 @@ int recv_raw(raw_info_t &raw_info,char *& payload,int & payloadlen)
 	}
 }*/
 
+int get_src_adress(u32_t &ip,u32_t remote_ip_uint32,int remote_port)  //a trick to get src adress for a dest adress,so that we can use the src address in raw socket as source ip
+{
+	struct sockaddr_in remote_addr_in={0};
+
+	socklen_t slen = sizeof(sockaddr_in);
+	//memset(&remote_addr_in, 0, sizeof(remote_addr_in));
+	remote_addr_in.sin_family = AF_INET;
+	remote_addr_in.sin_port = htons(remote_port);
+	remote_addr_in.sin_addr.s_addr = remote_ip_uint32;
+
+
+	int new_udp_fd=socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
+	if(new_udp_fd<0)
+	{
+		mylog(log_warn,"create udp_fd error\n");
+		return -1;
+	}
+	//set_buf_size(new_udp_fd);
+
+	mylog(log_debug,"created new udp_fd %d\n",new_udp_fd);
+	int ret = connect(new_udp_fd, (struct sockaddr *) &remote_addr_in, slen);
+	if(ret!=0)
+	{
+		mylog(log_warn,"udp fd connect fail\n");
+		close(new_udp_fd);
+		return -1;
+	}
+
+	struct sockaddr_in my_addr={0};
+	socklen_t len=sizeof(my_addr);
+
+    if(getsockname(new_udp_fd, (struct sockaddr *) &my_addr, &len)!=0) return -1;
+
+    ip=my_addr.sin_addr.s_addr;
+
+    close(new_udp_fd);
+
+    return 0;
+}
+
+int try_to_list_and_bind(int &fd,u32_t local_ip_uint32,int port)  //try to bind to a port,may fail.
+{
+	 int old_bind_fd=fd;
+
+	 if(raw_mode==mode_faketcp)
+	 {
+		 fd=socket(AF_INET,SOCK_STREAM,0);
+	 }
+	 else  if(raw_mode==mode_udp||raw_mode==mode_icmp)
+	 {
+		 fd=socket(AF_INET,SOCK_DGRAM,0);
+	 }
+     if(old_bind_fd!=-1)
+     {
+    	 close(old_bind_fd);
+     }
+
+	 struct sockaddr_in temp_bind_addr={0};
+     //bzero(&temp_bind_addr, sizeof(temp_bind_addr));
+
+     temp_bind_addr.sin_family = AF_INET;
+     temp_bind_addr.sin_port = htons(port);
+     temp_bind_addr.sin_addr.s_addr = local_ip_uint32;
+
+     if (bind(fd, (struct sockaddr*)&temp_bind_addr, sizeof(temp_bind_addr)) !=0)
+     {
+    	 mylog(log_debug,"bind fail\n");
+    	 return -1;
+     }
+	 if(raw_mode==mode_faketcp)
+	 {
+
+		if (listen(fd, SOMAXCONN) != 0) {
+			mylog(log_warn,"listen fail\n");
+			return -1;
+		}
+	 }
+     return 0;
+}
+int client_bind_to_a_new_port(int &fd,u32_t local_ip_uint32)//find a free port and bind to it.
+{
+	int raw_send_port=10000+get_true_random_number()%(65535-10000);
+	for(int i=0;i<1000;i++)//try 1000 times at max,this should be enough
+	{
+		if (try_to_list_and_bind(fd,local_ip_uint32,raw_send_port)==0)
+		{
+			return raw_send_port;
+		}
+	}
+	mylog(log_fatal,"bind port fail\n");
+	myexit(-1);
+	return -1;////for compiler check
+}

network.h

@@ -21,6 +21,8 @@ extern int lower_level_manual;
 extern char if_name[100];
 extern unsigned char dest_hw_addr[];
 
+extern int random_drop;
+
 extern int ifindex;
 
 struct icmphdr
@@ -90,10 +92,17 @@ int init_raw_socket();
 void init_filter(int port);
 
 void remove_filter();
+
 int init_ifindex(const char * if_name,int &index);
 
 int find_lower_level_info(u32_t ip,u32_t &dest_ip,string &if_name,string &hw);
 
+int get_src_adress(u32_t &ip,u32_t remote_ip_uint32,int remote_port);  //a trick to get src adress for a dest adress,so that we can use the src address in raw socket as source ip
+
+int try_to_list_and_bind(int & bind_fd,u32_t local_ip_uint32,int port);  //try to bind to a port,may fail.
+
+int client_bind_to_a_new_port(int & bind_fd,u32_t local_ip_uint32);//find a free port and bind to it.
+
 int send_raw_ip(raw_info_t &raw_info,const char * payload,int payloadlen);
 
 int peek_raw(packet_info_t &peek_info);

third-party/luci-app-udp2raw/LICENSE

@@ -0,0 +1,622 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+

third-party/luci-app-udp2raw/Makefile

@@ -0,0 +1,73 @@
+#
+# Copyright (C) 2016-2017 Jian Chang <aa65535@live.com>
+#
+# This is free software, licensed under the GNU General Public License v3.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=luci-app-udp2raw
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=2
+
+PKG_LICENSE:=GPLv3
+PKG_LICENSE_FILES:=LICENSE
+PKG_MAINTAINER:=Jian Chang <aa65535@live.com>
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	SECTION:=luci
+	CATEGORY:=LuCI
+	SUBMENU:=3. Applications
+	TITLE:=LuCI Support for udp2raw-tunnel
+	PKGARCH:=all
+#	DEPENDS:=+udp2raw-tunnel
+endef
+
+define Package/$(PKG_NAME)/description
+	LuCI Support for udp2raw-tunnel.
+endef
+
+define Build/Prepare
+	$(foreach po,$(wildcard ${CURDIR}/files/luci/i18n/*.po), \
+		po2lmo $(po) $(PKG_BUILD_DIR)/$(patsubst %.po,%.lmo,$(notdir $(po)));)
+endef
+
+define Build/Configure
+endef
+
+define Build/Compile
+endef
+
+define Package/$(PKG_NAME)/postinst
+#!/bin/sh
+if [ -z "$${IPKG_INSTROOT}" ]; then
+	( . /etc/uci-defaults/luci-udp2raw ) && rm -f /etc/uci-defaults/luci-udp2raw
+fi
+exit 0
+endef
+
+define Package/$(PKG_NAME)/conffiles
+	/etc/config/udp2raw
+endef
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/lib/lua/luci/i18n
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/udp2raw.*.lmo $(1)/usr/lib/lua/luci/i18n/
+	$(INSTALL_DIR) $(1)/usr/lib/lua/luci/controller
+	$(INSTALL_DATA) ./files/luci/controller/*.lua $(1)/usr/lib/lua/luci/controller/
+	$(INSTALL_DIR) $(1)/usr/lib/lua/luci/model/cbi/udp2raw
+	$(INSTALL_DATA) ./files/luci/model/cbi/udp2raw/*.lua $(1)/usr/lib/lua/luci/model/cbi/udp2raw/
+	$(INSTALL_DIR) $(1)/usr/lib/lua/luci/view/udp2raw
+	$(INSTALL_DATA) ./files/luci/view/udp2raw/*.htm $(1)/usr/lib/lua/luci/view/udp2raw/
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) ./files/root/etc/config/udp2raw $(1)/etc/config/udp2raw
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/root/etc/init.d/udp2raw $(1)/etc/init.d/udp2raw
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) ./files/root/etc/uci-defaults/luci-udp2raw $(1)/etc/uci-defaults/luci-udp2raw
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

third-party/luci-app-udp2raw/files/luci/controller/udp2raw.lua

@@ -0,0 +1,30 @@
+module("luci.controller.udp2raw", package.seeall)
+
+function index()
+	if not nixio.fs.access("/etc/config/udp2raw") then
+		return
+	end
+
+	entry({"admin", "services", "udp2raw"},
+		firstchild(), _("udp2raw-tunnel")).dependent = false
+
+	entry({"admin", "services", "udp2raw", "general"},
+		cbi("udp2raw/general"), _("Settings"), 1)
+
+	entry({"admin", "services", "udp2raw", "servers"},
+		arcombine(cbi("udp2raw/servers"), cbi("udp2raw/servers-details")),
+		_("Servers Manage"), 2).leaf = true
+
+	entry({"admin", "services", "udp2raw", "status"}, call("action_status"))
+end
+
+local function is_running(name)
+	return luci.sys.call("pidof %s >/dev/null" %{name}) == 0
+end
+
+function action_status()
+	luci.http.prepare_content("application/json")
+	luci.http.write_json({
+		running = is_running("udp2raw")
+	})
+end

third-party/luci-app-udp2raw/files/luci/i18n/udp2raw.zh-cn.po

@@ -0,0 +1,120 @@
+msgid ""
+msgstr "Content-Type: text/plain; charset=UTF-8\n"
+
+msgid "udp2raw-tunnel"
+msgstr "udp2raw 隧道"
+
+msgid "Settings"
+msgstr "设置"
+
+msgid "Servers Manage"
+msgstr "服务器管理"
+
+msgid "Running Status"
+msgstr "运行状态"
+
+msgid "Binary Version"
+msgstr "文件版本"
+
+msgid "Build Time"
+msgstr "编译时间"
+
+msgid "Invalid Binary File."
+msgstr "可执行文件无效。"
+
+msgid "RUNNING"
+msgstr "运行中"
+
+msgid "NOT RUNNING"
+msgstr "未运行"
+
+msgid "General Settings"
+msgstr "基本设置"
+
+msgid "Server"
+msgstr "服务器"
+
+msgid "Disable"
+msgstr "停用"
+
+msgid "Run Daemon as User"
+msgstr "以该用户启动"
+
+msgid "Alias"
+msgstr "别名"
+
+msgid "None"
+msgstr "无"
+
+msgid "Server Address"
+msgstr "服务器地址"
+
+msgid "Listen Address"
+msgstr "监听地址"
+
+msgid "Edit Server"
+msgstr "编辑服务器"
+
+msgid "Alias(optional)"
+msgstr "别名(可选)"
+
+msgid "Server Port"
+msgstr "服务器端口"
+
+msgid "Local Listen Host"
+msgstr "本地监听地址"
+
+msgid "Local Listen Port"
+msgstr "本地监听端口"
+
+msgid "Raw Mode"
+msgstr "Raw 方式"
+
+msgid "Password"
+msgstr "密码"
+
+msgid "Cipher Mode"
+msgstr "加密方式"
+
+msgid "Auth Mode"
+msgstr "验证方式"
+
+msgid "Auto Rule"
+msgstr "自动规则"
+
+msgid "Auto add (and delete) iptables rule."
+msgstr "自动添加/删除 iptables 规则。"
+
+msgid "Keep Rule"
+msgstr "保持规则"
+
+msgid "Monitor iptables and auto re-add if necessary."
+msgstr "定期检查 iptables 并在必要时重新添加规则。"
+
+msgid "seq Mode"
+msgstr "seq 模式"
+
+msgid "seq increase mode for faketcp."
+msgstr "用于 faketcp 的 seq 增加方式。"
+
+msgid "Lower Level"
+msgstr ""
+
+msgid "Send packets at OSI level 2, format: \"eth0#00:11:22:33:44:55\", or \"auto\"."
+msgstr "在 OSI 模型第二层发送数据包，格式：\"eth0#00:11:22:33:44:55\"，或 \"auto\"。"
+
+msgid "Source-IP"
+msgstr "源IP"
+
+msgid "Force source-ip for Raw Socket."
+msgstr "在原始数据包中强制指定源IP。"
+
+msgid "Source-Port"
+msgstr "源端口"
+
+msgid "Force source-port for Raw Socket, TCP/UDP only."
+msgstr "在原始数据包中强制指定源端口，仅用于 TCP/UDP。"
+
+msgid "Log Level"
+msgstr "日志级别"
+

third-party/luci-app-udp2raw/files/luci/model/cbi/udp2raw/general.lua

@@ -0,0 +1,39 @@
+local m, s, o
+local uci = luci.model.uci.cursor()
+local servers = {}
+
+local function has_bin(name)
+	return luci.sys.call("command -v %s >/dev/null" %{name}) == 0
+end
+
+if not has_bin("udp2raw") then
+	return Map("udp2raw", "%s - %s" %{translate("udp2raw-tunnel"),
+		translate("Settings")}, '<b style="color:red">udp2raw-tunnel binary file(/usr/bin/udp2raw) not found. </b>')
+end
+
+uci:foreach("udp2raw", "servers", function(s)
+	if s.server_addr and s.server_port then
+		servers[#servers+1] = {name = s[".name"], alias = s.alias or "%s:%s" %{s.server_addr, s.server_port}}
+	end
+end)
+
+m = Map("udp2raw", "%s - %s" %{translate("udp2raw-tunnel"), translate("Settings")})
+m:append(Template("udp2raw/status"))
+
+s = m:section(NamedSection, "general", "general", translate("General Settings"))
+s.anonymous = true
+s.addremove = false
+
+o = s:option(DynamicList, "server", translate("Server"))
+o.template = "udp2raw/dynamiclist"
+o:value("nil", translate("Disable"))
+for _, s in ipairs(servers) do o:value(s.name, s.alias) end
+o.default = "nil"
+o.rmempty = false
+
+o = s:option(ListValue, "daemon_user", translate("Run Daemon as User"))
+for u in luci.util.execi("cat /etc/passwd | cut -d ':' -f1") do o:value(u) end
+o.default = "root"
+o.rmempty = false
+
+return m

third-party/luci-app-udp2raw/files/luci/model/cbi/udp2raw/servers-details.lua

@@ -0,0 +1,96 @@
+local m, s, o
+local sid = arg[1]
+
+local raw_modes = {
+	"faketcp",
+	"udp",
+	"icmp",
+}
+
+local cipher_modes = {
+	"aes128cbc",
+	"xor",
+	"none",
+}
+
+local auth_modes = {
+	"md5",
+	"crc32",
+	"simple",
+	"none",
+}
+
+m = Map("udp2raw", "%s - %s" %{translate("udp2raw-tunnel"), translate("Edit Server")})
+m.redirect = luci.dispatcher.build_url("admin/services/udp2raw/servers")
+m.sid = sid
+
+if m.uci:get("udp2raw", sid) ~= "servers" then
+	luci.http.redirect(m.redirect)
+	return
+end
+
+s = m:section(NamedSection, sid, "servers")
+s.anonymous = true
+s.addremove = false
+
+o = s:option(Value, "alias", translate("Alias(optional)"))
+
+o = s:option(Value, "server_addr", translate("Server"))
+o.datatype = "host"
+o.rmempty = false
+
+o = s:option(Value, "server_port", translate("Server Port"))
+o.datatype = "port"
+o.placeholder = "8080"
+
+o = s:option(Value, "listen_addr", translate("Local Listen Host"))
+o.datatype = "ipaddr"
+o.placeholder = "127.0.0.1"
+
+o = s:option(Value, "listen_port", translate("Local Listen Port"))
+o.datatype = "port"
+o.placeholder = "2080"
+
+o = s:option(ListValue, "raw_mode", translate("Raw Mode"))
+for _, v in ipairs(raw_modes) do o:value(v, v:lower()) end
+o.default = "faketcp"
+o.rmempty = false
+
+o = s:option(Value, "key", translate("Password"))
+o.password = true
+
+o = s:option(ListValue, "cipher_mode", translate("Cipher Mode"))
+for _, v in ipairs(cipher_modes) do o:value(v, v:lower()) end
+o.default = "aes128cbc"
+
+o = s:option(ListValue, "auth_mode", translate("Auth Mode"))
+for _, v in ipairs(auth_modes) do o:value(v, v:lower()) end
+o.default = "md5"
+
+o = s:option(Flag, "auto_rule", translate("Auto Rule"), translate("Auto add (and delete) iptables rule."))
+o.enabled = "1"
+o.disabled = "0"
+o.default = "1"
+
+o = s:option(Flag, "keep_rule", translate("Keep Rule"), translate("Monitor iptables and auto re-add if necessary."))
+o.enabled = "1"
+o.disabled = "0"
+o:depends("auto_rule", "1")
+
+o = s:option(Value, "seq_mode", translate("seq Mode"), translate("seq increase mode for faketcp."))
+o.datatype = "range(0,4)"
+o.placeholder = "3"
+
+o = s:option(Value, "lower_level", translate("Lower Level"), translate("Send packets at OSI level 2, format: \"eth0#00:11:22:33:44:55\", or \"auto\"."))
+
+o = s:option(Value, "source_ip", translate("Source-IP"), translate("Force source-ip for Raw Socket."))
+o.datatype = "ipaddr"
+
+o = s:option(Value, "source_port", translate("Source-Port"), translate("Force source-port for Raw Socket, TCP/UDP only."))
+o.datatype = "port"
+
+o = s:option(Value, "log_level", translate("Log Level"))
+o.datatype = "range(0,6)"
+o.placeholder = "4"
+
+return m

third-party/luci-app-udp2raw/files/luci/model/cbi/udp2raw/servers.lua

@@ -0,0 +1,56 @@
+local m, s, o
+
+m = Map("udp2raw", "%s - %s" %{translate("udp2raw-tunnel"), translate("Servers Manage")})
+
+s = m:section(TypedSection, "servers")
+s.anonymous = true
+s.addremove = true
+s.sortable = true
+s.template = "cbi/tblsection"
+s.extedit = luci.dispatcher.build_url("admin/services/udp2raw/servers/%s")
+function s.create(...)
+	local sid = TypedSection.create(...)
+	if sid then
+		luci.http.redirect(s.extedit % sid)
+		return
+	end
+end
+
+o = s:option(DummyValue, "alias", translate("Alias"))
+function o.cfgvalue(...)
+	return Value.cfgvalue(...) or translate("None")
+end
+
+o = s:option(DummyValue, "_server_address", translate("Server Address"))
+function o.cfgvalue(self, section)
+	local server_addr = m.uci:get("udp2raw", section, "server_addr") or "?"
+	local server_port = m.uci:get("udp2raw", section, "server_port") or "8080"
+	return "%s:%s" %{server_addr, server_port}
+end
+
+o = s:option(DummyValue, "_listen_address", translate("Listen Address"))
+function o.cfgvalue(self, section)
+	local listen_addr = m.uci:get("udp2raw", section, "listen_addr") or "127.0.0.1"
+	local listen_port = m.uci:get("udp2raw", section, "listen_port") or "2080"
+	return "%s:%s" %{listen_addr, listen_port}
+end
+
+o = s:option(DummyValue, "raw_mode", translate("Raw Mode"))
+function o.cfgvalue(...)
+	local v = Value.cfgvalue(...)
+	return v and v:lower() or "faketcp"
+end
+
+o = s:option(DummyValue, "cipher_mode", translate("Cipher Mode"))
+function o.cfgvalue(...)
+	local v = Value.cfgvalue(...)
+	return v and v:lower() or "aes128cbc"
+end
+
+o = s:option(DummyValue, "auth_mode", translate("Auth Mode"))
+function o.cfgvalue(...)
+	local v = Value.cfgvalue(...)
+	return v and v:lower() or "md5"
+end
+
+return m

third-party/luci-app-udp2raw/files/luci/view/udp2raw/dynamiclist.htm

@@ -0,0 +1,98 @@
+<%#
+ Copyright (C) 2017 Jian Chang <aa65535@live.com>
+ Licensed to the public under the GNU General Public License v3.
+-%>
+
+<%+cbi/valueheader%>
+
+<%-
+	local values = self:formvalue(section)
+	if not values then
+		values = self:cfgvalue(section) or {self.default}
+	end
+
+	local function serialize_json(x, cb)
+		local rv, push = nil, cb
+		if not push then
+			rv = { }
+			push = function(tok) rv[#rv+1] = tok end
+		end
+
+		if x == nil then
+			push("null")
+		elseif type(x) == "table" then
+			push("[")
+			for k = 1, #x do
+				if k > 1 then
+					push(",")
+				end
+				serialize_json(x[k], push)
+			end
+			push("]")
+		else
+			push('"%s"' % tostring(x):gsub('["%z\1-\31\\]',
+				function(c) return '\\u%04x' % c:byte(1) end))
+		end
+
+		if not cb then
+			return table.concat(rv, "")
+		end
+	end
+-%>
+
+<div<%=attr("id", cbid .. ".value.field")%>></div>
+<script type="text/javascript">//<![CDATA[
+	(function() {
+		var values = <%=serialize_json(values)%>;
+		var keylist = <%=serialize_json(self.keylist)%>;
+		var vallist = <%=serialize_json(self.vallist)%>;
+		var parent = document.getElementById("<%=cbid%>.value.field");
+
+		var dynamiclist_cbi_init = function() {
+			while (parent.firstChild) {
+				parent.removeChild(parent.firstChild);
+			}
+
+			for (var i = 0; i < values.length; i++) {
+				var sel = document.createElement("select");
+				sel.id = "<%=cbid%>." + (i + 1);
+				sel.name = "<%=cbid%>";
+				sel.index = i;
+				sel.className = "cbi-input-select";
+				sel.onchange = function() {
+					values[this.index] = this.value;
+				};
+				parent.appendChild(sel);
+
+				for (var j = 0; j < keylist.length; j++) {
+					var opt = document.createElement("option");
+					opt.value = keylist[j];
+					if (opt.value == values[i]) {
+						opt.selected = "selected";
+					}
+					opt.appendChild(document.createTextNode(vallist[j]));
+					sel.appendChild(opt);
+				}
+
+				var btn = document.createElement('img');
+				btn.src = "<%=resource%>" + ((i + 1) < values.length ? "/cbi/remove.gif" : "/cbi/add.gif");
+				btn.index = i;
+				btn.className = 'cbi-image-button';
+				btn.onclick = function() {
+					if (this.src.indexOf('remove') > -1) {
+						values.splice(this.index, 1);
+					} else {
+						values.push("<%=self.default%>");
+					}
+					dynamiclist_cbi_init();
+					return false;
+				};
+				parent.appendChild(btn);
+				parent.appendChild(document.createElement('br'));
+			}
+		};
+		dynamiclist_cbi_init();
+	}());
+//]]></script>
+
+<%+cbi/valuefooter%>

third-party/luci-app-udp2raw/files/luci/view/udp2raw/status.htm

@@ -0,0 +1,39 @@
+<%
+local function get_udp2raw_version(name)
+	local info = luci.util.split(luci.sys.exec("%s -h 2>/dev/null" %{name}), "\n")
+	local version = string.match(info[2], "git version:(%w+)")
+	local build = string.match(info[2], "build date:(.+)")
+	return info[1] == "udp2raw-tunnel" and version or "", info[1] == "udp2raw-tunnel" and build or ""
+end
+
+local udp2raw_version, udp2raw_build = get_udp2raw_version("udp2raw")
+-%>
+
+<fieldset class="cbi-section">
+	<legend><%:Running Status%></legend>
+	<table width="100%" cellspacing="10" id="_udp2raw_status_table">
+		<tr>
+			<td width="33%"><%:Binary Version%></td>
+			<td>
+				<% if udp2raw_version == "" then -%>
+				<em><%:Invalid Binary File.%></em>
+				<% else -%>
+				<%=pcdata(udp2raw_version)%>
+				<%- end %>
+			</td>
+		</tr>
+		<% if udp2raw_build ~= "" then -%>
+		<tr><td width="33%"><%:Build Time%></td><td><%=pcdata(udp2raw_build)%></td></tr>
+		<% end -%>
+		<tr><td width="33%"><%:Running Status%></td><td id="_udp2raw_status"><em><%:Collecting data...%></em></td></tr>
+	</table>
+</fieldset>
+
+<script type="text/javascript">//<![CDATA[
+	var udp2raw_status = document.getElementById('_udp2raw_status');
+	XHR.poll(5, '<%=luci.dispatcher.build_url("admin", "services", "udp2raw", "status")%>', null, function(x, status) {
+		if ( x && x.status == 200 ) {
+			udp2raw_status.innerHTML = status.running ? '<%:RUNNING%>' : '<%:NOT RUNNING%>';
+		}
+	});
+//]]></script>

third-party/luci-app-udp2raw/files/root/etc/config/udp2raw

@@ -0,0 +1,16 @@
+
+config general 'general'
+	list server 'nil'
+	option daemon_user 'root'
+
+config servers 'default'
+	option server_addr ''
+	option server_port '8080'
+	option listen_addr '127.0.0.1'
+	option listen_port '2080'
+	option raw_mode 'faketcp'
+	option key ''
+	option cipher_mode 'aes128cbc'
+	option auth_mode 'md5'
+	option auto_rule '1'
+

third-party/luci-app-udp2raw/files/root/etc/init.d/udp2raw

@@ -0,0 +1,118 @@
+#!/bin/sh /etc/rc.common
+
+START=88
+STOP=15
+USE_PROCD=1
+
+NAME=udp2raw
+
+_log() {
+	logger -p "daemon.$1" -t "$NAME" "$2"
+}
+
+has_valid_server() {
+	local server
+	for server in $@; do
+		[ "$(uci_get $NAME $server)" = "servers" ] && return 0
+	done
+	return 1
+}
+
+create_config() {
+	local config_file="$1"
+	echo "# auto-generated config file from /etc/config/udp2raw" > $config_file
+
+	echo "-c" >> $config_file
+	echo "-l ${listen_addr:=127.0.0.1}:${listen_port:=2080}" >> $config_file && _log "info" "listening on: ${listen_addr}:${listen_port}"
+	echo "-r ${server_addr}:${server_port:=8080}" >> $config_file
+
+	[ -n "$raw_mode" ] && echo "--raw-mode ${raw_mode}" >> $config_file && _log "info" "raw-mode: ${raw_mode}"
+	[ -n "$key" ] && echo "--key ${key}" >> $config_file
+	[ -n "$cipher_mode" ] && echo "--cipher-mode ${cipher_mode}" >> $config_file
+	[ -n "$auth_mode" ] && echo "--auth-mode ${auth_mode}" >> $config_file
+
+	[ $auto_rule -eq 1 ] && echo "--auto-rule" >> $config_file
+	[ $auto_rule -eq 1 -a $keep_rule -eq 1 ] && echo "--keep-rule" >> $config_file
+
+	[ -n "$seq_mode" ] && echo "--seq-mode ${seq_mode}" >> $config_file
+	[ -n "$lower_level" ] && echo "--lower-level ${lower_level}" >> $config_file
+	[ -n "$source_ip" ] && echo "--source-ip ${source_ip}" >> $config_file
+	[ -n "$source_port" ] && echo "--source-port ${source_port}" >> $config_file
+
+	[ -n "$log_level" ] && echo "--log-level ${log_level}" >> $config_file
+	echo "--disable-color" >> $config_file
+
+	echo "--wait-lock" >> $config_file
+}
+
+validate_config_section() {
+	uci_validate_section "$NAME" general "$1" \
+		'server:uciname' \
+		'daemon_user:string:root'
+}
+
+validate_server_section() {
+	uci_validate_section "$NAME" servers "$1" \
+		'server_addr:host' \
+		'server_port:port:8080' \
+		'listen_addr:ipaddr:127.0.0.1' \
+		'listen_port:port:2080' \
+		'raw_mode:or("faketcp", "udp", "icmp"):faketcp' \
+		'key:string' \
+		'cipher_mode:or("aes128cbc", "xor", "none"):aes128cbc' \
+		'auth_mode:or("md5", "crc32", "simple", "none"):md5' \
+		'auto_rule:bool:1' \
+		'keep_rule:bool:0' \
+		'seq_mode:range(0,4)' \
+		'lower_level:string' \
+		'source_ip:ipaddr' \
+		'source_port:port' \
+		'log_level:range(0,6)'
+}
+
+start_instance() {
+	local server="$1"
+
+	if [ -z "$server" -o "$server" == "nil" ]; then
+		return 0
+	elif ! validate_server_section "$server"; then
+		_log "err" "Server config validation failed."
+		return 1
+	fi
+
+	/sbin/validate_data "ipaddr" "$server_addr" >/dev/null 2>&1
+	[ $? -ne 0 ] && server_addr=$(nslookup "$server_addr" | \
+		sed -n 's/^Address[[:space:]]*[0-9]*:[[:space:]]*\(\([0-9]\{1,3\}\.\)\{3\}[0-9]\{1,3\}\)$/\1/p')
+	if [ -z "$server_addr" ]; then
+		_log "err" "Server address validation failed."
+		return 1
+	fi
+
+	[ -d /var/etc ] || mkdir -p /var/etc
+	local config_file="/var/etc/${NAME}.${server}.conf"
+	create_config "$config_file" || return 1
+
+	procd_open_instance
+	procd_set_param command /usr/bin/udp2raw
+	procd_append_param command --conf-file "$config_file"
+	procd_set_param respawn
+	procd_set_param file "$config_file"
+	[ -n "$daemon_user" ] && procd_set_param user "$daemon_user" && _log "info" "running from ${daemon_user} user"
+	procd_set_param pidfile "/var/run/${NAME}.${server}.pid"
+	procd_close_instance
+}
+
+service_triggers() {
+	procd_add_reload_trigger "$NAME"
+}
+
+start_service() {
+	if ! validate_config_section "general" ; then
+		_log "err" "Config validate failed."
+		return 1
+	fi
+	has_valid_server $server || return 1
+	for srv in $server; do
+		start_instance $srv
+	done
+}

third-party/luci-app-udp2raw/files/root/etc/init.d/udp2raw.init

@@ -0,0 +1,132 @@
+#!/bin/sh /etc/rc.common
+
+START=88
+STOP=15
+
+NAME=udp2raw
+
+_log() {
+	logger -p "daemon.$1" -t "$NAME" "$2"
+}
+
+has_valid_server() {
+	local server
+	for server in $@; do
+		[ "$(uci_get $NAME $server)" = "servers" ] && return 0
+	done
+	return 1
+}
+
+create_config() {
+	local config_file="$1"
+	echo "# auto-generated config file from /etc/config/udp2raw" > $config_file
+
+	echo "-c" >> $config_file
+	echo "-l ${listen_addr:=127.0.0.1}:${listen_port:=2080}" >> $config_file
+	echo "-r ${server_addr}:${server_port:=8080}" >> $config_file
+
+	[ -n "$raw_mode" ] && echo "--raw-mode ${raw_mode}" >> $config_file
+	[ -n "$key" ] && echo "--key ${key}" >> $config_file
+	[ -n "$cipher_mode" ] && echo "--cipher-mode ${cipher_mode}" >> $config_file
+	[ -n "$auth_mode" ] && echo "--auth-mode ${auth_mode}" >> $config_file
+
+	[ $auto_rule -eq 1 ] && echo "--auto-rule" >> $config_file
+	[ $auto_rule -eq 1 -a $keep_rule -eq 1 ] && echo "--keep-rule" >> $config_file
+
+	[ -n "$seq_mode" ] && echo "--seq-mode ${seq_mode}" >> $config_file
+	[ -n "$lower_level" ] && echo "--lower-level ${lower_level}" >> $config_file
+	[ -n "$source_ip" ] && echo "--source-ip ${source_ip}" >> $config_file
+	[ -n "$source_port" ] && echo "--source-port ${source_port}" >> $config_file
+
+	[ -n "$log_level" ] && echo "--log-level ${log_level}" >> $config_file
+	echo "--disable-color" >> $config_file
+	
+	echo "--wait-lock" >> $config_file
+}
+
+validate_config_section() {
+	local ret=$(/sbin/validate_data "$NAME" general "$1" \
+		'server:uciname' \
+		'daemon_user:string:root' \
+		2> /dev/null)
+	[ $? -ne 0 ] && return 1
+	eval "$ret"
+}
+
+validate_server_section() {
+	local ret=$(/sbin/validate_data "$NAME" servers "$1" \
+		'server_addr:host' \
+		'server_port:port:8080' \
+		'listen_addr:ipaddr:127.0.0.1' \
+		'listen_port:port:2080' \
+		'raw_mode:or("faketcp", "udp", "icmp"):faketcp' \
+		'key:string' \
+		'cipher_mode:or("aes128cbc", "xor", "none"):aes128cbc' \
+		'auth_mode:or("md5", "crc32", "simple", "none"):md5' \
+		'auto_rule:bool:1' \
+		'keep_rule:bool:0' \
+		'seq_mode:range(0,4)' \
+		'lower_level:string' \
+		'source_ip:ipaddr' \
+		'source_port:port' \
+		'log_level:range(0,6)' \
+		2> /dev/null)
+	[ $? -ne 0 ] && return 1
+	eval "$ret"
+}
+
+start_instance() {
+	local server="$1"
+
+	if [ -z "$server" -o "$server" == "nil" ]; then
+		return 0
+	elif ! validate_server_section "$server"; then
+		_log "err" "Server config validation failed."
+		return 1
+	fi
+
+	/sbin/validate_data "ipaddr" "$server_addr" >/dev/null 2>&1
+	[ $? -ne 0 ] && server_addr=$(nslookup "$server_addr" | \
+		sed -n 's/^Address[[:space:]]*[0-9]*:[[:space:]]*\(\([0-9]\{1,3\}\.\)\{3\}[0-9]\{1,3\}\)$/\1/p')
+	if [ -z "$server_addr" ]; then
+		_log "err" "Server address validation failed."
+		return 1
+	fi
+
+	[ -d /var/etc ] || mkdir -p /var/etc
+	local config_file="/var/etc/${NAME}.${server}.conf"
+	create_config "$config_file" || return 1
+	[ -d "/var/log/${NAME}" ] || mkdir -p "/var/log/${NAME}"
+
+	/usr/bin/udp2raw --conf-file "$config_file" >> "/var/log/${NAME}/${NAME}.${server}.log" &
+	echo $! > "/var/run/${NAME}.${server}.pid"
+	return 0
+}
+
+start() {
+	pgrep "/usr/bin/${NAME}" >/dev/null 2>&1 && return
+
+	if ! validate_config_section "general" ; then
+		_log "err" "Config validate failed."
+		return 1
+	fi
+	has_valid_server $server || return 1
+	for srv in $server; do
+		start_instance $srv
+	done
+}
+
+stop() {
+	local pids=$(pgrep "/usr/bin/${NAME}" 2> /dev/null)
+	[ $? -ne 0 ] && return
+	for pid in $pids; do
+		kill $pid >/dev/null 2>&1
+	done
+	return 0
+}
+
+restart() {
+	stop
+	sleep 1
+	start
+}

third-party/luci-app-udp2raw/files/root/etc/uci-defaults/luci-udp2raw

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+uci -q batch <<-EOF >/dev/null
+	delete ucitrack.@udp2raw[-1]
+	add ucitrack udp2raw
+	set ucitrack.@udp2raw[-1].init=udp2raw
+	commit ucitrack
+EOF
+
+general=$(uci -q get udp2raw.@general[-1])
+if [ -z "$general" ]; then
+	uci -q add udp2raw general
+fi
+if [ ."$general" != ."general" ]; then
+	uci -q batch <<-EOF >/dev/null
+		rename udp2raw.@general[-1]="general"
+		set udp2raw.general.server="nil"
+		commit udp2raw
+	EOF
+fi
+
+rm -rf /tmp/luci-indexcache /tmp/luci-modulecache
+exit 0

third-party/luci-app-udp2raw/tools/po2lmo/Makefile

@@ -0,0 +1,12 @@
+
+INSTALL = install
+PREFIX  = /usr/bin
+
+po2lmo: src/po2lmo.o src/template_lmo.o
+	$(CC) $(LDFLAGS) -o src/po2lmo src/po2lmo.o src/template_lmo.o
+
+install:
+	$(INSTALL) -m 755 src/po2lmo $(PREFIX)
+
+clean:
+	$(RM) src/po2lmo src/*.o

third-party/luci-app-udp2raw/tools/po2lmo/src/po2lmo.c

@@ -0,0 +1,247 @@
+/*
+ * lmo - Lua Machine Objects - PO to LMO conversion tool
+ *
+ *   Copyright (C) 2009-2012 Jo-Philipp Wich <xm@subsignal.org>
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+#include "template_lmo.h"
+
+static void die(const char *msg)
+{
+	fprintf(stderr, "Error: %s\n", msg);
+	exit(1);
+}
+
+static void usage(const char *name)
+{
+	fprintf(stderr, "Usage: %s input.po output.lmo\n", name);
+	exit(1);
+}
+
+static void print(const void *ptr, size_t size, size_t nmemb, FILE *stream)
+{
+	if( fwrite(ptr, size, nmemb, stream) == 0 )
+		die("Failed to write stdout");
+}
+
+static int extract_string(const char *src, char *dest, int len)
+{
+	int pos = 0;
+	int esc = 0;
+	int off = -1;
+
+	for( pos = 0; (pos < strlen(src)) && (pos < len); pos++ )
+	{
+		if( (off == -1) && (src[pos] == '"') )
+		{
+			off = pos + 1;
+		}
+		else if( off >= 0 )
+		{
+			if( esc == 1 )
+			{
+				switch (src[pos])
+				{
+				case '"':
+				case '\\':
+					off++;
+					break;
+				}
+				dest[pos-off] = src[pos];
+				esc = 0;
+			}
+			else if( src[pos] == '\\' )
+			{
+				dest[pos-off] = src[pos];
+				esc = 1;
+			}
+			else if( src[pos] != '"' )
+			{
+				dest[pos-off] = src[pos];
+			}
+			else
+			{
+				dest[pos-off] = '\0';
+				break;
+			}
+		}
+	}
+
+	return (off > -1) ? strlen(dest) : -1;
+}
+
+static int cmp_index(const void *a, const void *b)
+{
+	uint32_t x = ((const lmo_entry_t *)a)->key_id;
+	uint32_t y = ((const lmo_entry_t *)b)->key_id;
+
+	if (x < y)
+		return -1;
+	else if (x > y)
+		return 1;
+
+	return 0;
+}
+
+static void print_uint32(uint32_t x, FILE *out)
+{
+	uint32_t y = htonl(x);
+	print(&y, sizeof(uint32_t), 1, out);
+}
+
+static void print_index(void *array, int n, FILE *out)
+{
+	lmo_entry_t *e;
+
+	qsort(array, n, sizeof(*e), cmp_index);
+
+	for (e = array; n > 0; n--, e++)
+	{
+		print_uint32(e->key_id, out);
+		print_uint32(e->val_id, out);
+		print_uint32(e->offset, out);
+		print_uint32(e->length, out);
+	}
+}
+
+int main(int argc, char *argv[])
+{
+	char line[4096];
+	char key[4096];
+	char val[4096];
+	char tmp[4096];
+	int state  = 0;
+	int offset = 0;
+	int length = 0;
+	int n_entries = 0;
+	void *array = NULL;
+	lmo_entry_t *entry = NULL;
+	uint32_t key_id, val_id;
+
+	FILE *in;
+	FILE *out;
+
+	if( (argc != 3) || ((in = fopen(argv[1], "r")) == NULL) || ((out = fopen(argv[2], "w")) == NULL) )
+		usage(argv[0]);
+
+	memset(line, 0, sizeof(key));
+	memset(key, 0, sizeof(val));
+	memset(val, 0, sizeof(val));
+
+	while( (NULL != fgets(line, sizeof(line), in)) || (state >= 2 && feof(in)) )
+	{
+		if( state == 0 && strstr(line, "msgid \"") == line )
+		{
+			switch(extract_string(line, key, sizeof(key)))
+			{
+				case -1:
+					die("Syntax error in msgid");
+				case 0:
+					state = 1;
+					break;
+				default:
+					state = 2;
+			}
+		}
+		else if( state == 1 || state == 2 )
+		{
+			if( strstr(line, "msgstr \"") == line || state == 2 )
+			{
+				switch(extract_string(line, val, sizeof(val)))
+				{
+					case -1:
+						state = 4;
+						break;
+					default:
+						state = 3;
+				}
+			}
+			else
+			{
+				switch(extract_string(line, tmp, sizeof(tmp)))
+				{
+					case -1:
+						state = 2;
+						break;
+					default:
+						strcat(key, tmp);
+				}
+			}
+		}
+		else if( state == 3 )
+		{
+			switch(extract_string(line, tmp, sizeof(tmp)))
+			{
+				case -1:
+					state = 4;
+					break;
+				default:
+					strcat(val, tmp);
+			}
+		}
+
+		if( state == 4 )
+		{
+			if( strlen(key) > 0 && strlen(val) > 0 )
+			{
+				key_id = sfh_hash(key, strlen(key));
+				val_id = sfh_hash(val, strlen(val));
+
+				if( key_id != val_id )
+				{
+					n_entries++;
+					array = realloc(array, n_entries * sizeof(lmo_entry_t));
+					entry = (lmo_entry_t *)array + n_entries - 1;
+
+					if (!array)
+						die("Out of memory");
+
+					entry->key_id = key_id;
+					entry->val_id = val_id;
+					entry->offset = offset;
+					entry->length = strlen(val);
+
+					length = strlen(val) + ((4 - (strlen(val) % 4)) % 4);
+
+					print(val, length, 1, out);
+					offset += length;
+				}
+			}
+
+			state = 0;
+			memset(key, 0, sizeof(key));
+			memset(val, 0, sizeof(val));
+		}
+
+		memset(line, 0, sizeof(line));
+	}
+
+	print_index(array, n_entries, out);
+
+	if( offset > 0 )
+	{
+		print_uint32(offset, out);
+		fsync(fileno(out));
+		fclose(out);
+	}
+	else
+	{
+		fclose(out);
+		unlink(argv[2]);
+	}
+
+	fclose(in);
+	return(0);
+}

third-party/luci-app-udp2raw/tools/po2lmo/src/template_lmo.c

@@ -0,0 +1,328 @@
+/*
+ * lmo - Lua Machine Objects - Base functions
+ *
+ *   Copyright (C) 2009-2010 Jo-Philipp Wich <xm@subsignal.org>
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+#include "template_lmo.h"
+
+/*
+ * Hash function from http://www.azillionmonkeys.com/qed/hash.html
+ * Copyright (C) 2004-2008 by Paul Hsieh
+ */
+
+uint32_t sfh_hash(const char *data, int len)
+{
+	uint32_t hash = len, tmp;
+	int rem;
+
+	if (len <= 0 || data == NULL) return 0;
+
+	rem = len & 3;
+	len >>= 2;
+
+	/* Main loop */
+	for (;len > 0; len--) {
+		hash  += sfh_get16(data);
+		tmp    = (sfh_get16(data+2) << 11) ^ hash;
+		hash   = (hash << 16) ^ tmp;
+		data  += 2*sizeof(uint16_t);
+		hash  += hash >> 11;
+	}
+
+	/* Handle end cases */
+	switch (rem) {
+		case 3: hash += sfh_get16(data);
+			hash ^= hash << 16;
+			hash ^= data[sizeof(uint16_t)] << 18;
+			hash += hash >> 11;
+			break;
+		case 2: hash += sfh_get16(data);
+			hash ^= hash << 11;
+			hash += hash >> 17;
+			break;
+		case 1: hash += *data;
+			hash ^= hash << 10;
+			hash += hash >> 1;
+	}
+
+	/* Force "avalanching" of final 127 bits */
+	hash ^= hash << 3;
+	hash += hash >> 5;
+	hash ^= hash << 4;
+	hash += hash >> 17;
+	hash ^= hash << 25;
+	hash += hash >> 6;
+
+	return hash;
+}
+
+uint32_t lmo_canon_hash(const char *str, int len)
+{
+	char res[4096];
+	char *ptr, prev;
+	int off;
+
+	if (!str || len >= sizeof(res))
+		return 0;
+
+	for (prev = ' ', ptr = res, off = 0; off < len; prev = *str, off++, str++)
+	{
+		if (isspace(*str))
+		{
+			if (!isspace(prev))
+				*ptr++ = ' ';
+		}
+		else
+		{
+			*ptr++ = *str;
+		}
+	}
+
+	if ((ptr > res) && isspace(*(ptr-1)))
+		ptr--;
+
+	return sfh_hash(res, ptr - res);
+}
+
+lmo_archive_t * lmo_open(const char *file)
+{
+	int in = -1;
+	uint32_t idx_offset = 0;
+	struct stat s;
+
+	lmo_archive_t *ar = NULL;
+
+	if (stat(file, &s) == -1)
+		goto err;
+
+	if ((in = open(file, O_RDONLY)) == -1)
+		goto err;
+
+	if ((ar = (lmo_archive_t *)malloc(sizeof(*ar))) != NULL)
+	{
+		memset(ar, 0, sizeof(*ar));
+
+		ar->fd     = in;
+		ar->size = s.st_size;
+
+		fcntl(ar->fd, F_SETFD, fcntl(ar->fd, F_GETFD) | FD_CLOEXEC);
+
+		if ((ar->mmap = mmap(NULL, ar->size, PROT_READ, MAP_SHARED, ar->fd, 0)) == MAP_FAILED)
+			goto err;
+
+		idx_offset = ntohl(*((const uint32_t *)
+		                     (ar->mmap + ar->size - sizeof(uint32_t))));
+
+		if (idx_offset >= ar->size)
+			goto err;
+
+		ar->index  = (lmo_entry_t *)(ar->mmap + idx_offset);
+		ar->length = (ar->size - idx_offset - sizeof(uint32_t)) / sizeof(lmo_entry_t);
+		ar->end    = ar->mmap + ar->size;
+
+		return ar;
+	}
+
+err:
+	if (in > -1)
+		close(in);
+
+	if (ar != NULL)
+	{
+		if ((ar->mmap != NULL) && (ar->mmap != MAP_FAILED))
+			munmap(ar->mmap, ar->size);
+
+		free(ar);
+	}
+
+	return NULL;
+}
+
+void lmo_close(lmo_archive_t *ar)
+{
+	if (ar != NULL)
+	{
+		if ((ar->mmap != NULL) && (ar->mmap != MAP_FAILED))
+			munmap(ar->mmap, ar->size);
+
+		close(ar->fd);
+		free(ar);
+
+		ar = NULL;
+	}
+}
+
+
+lmo_catalog_t *_lmo_catalogs = NULL;
+lmo_catalog_t *_lmo_active_catalog = NULL;
+
+int lmo_load_catalog(const char *lang, const char *dir)
+{
+	DIR *dh = NULL;
+	char pattern[16];
+	char path[PATH_MAX];
+	struct dirent *de = NULL;
+
+	lmo_archive_t *ar = NULL;
+	lmo_catalog_t *cat = NULL;
+
+	if (!lmo_change_catalog(lang))
+		return 0;
+
+	if (!dir || !(dh = opendir(dir)))
+		goto err;
+
+	if (!(cat = malloc(sizeof(*cat))))
+		goto err;
+
+	memset(cat, 0, sizeof(*cat));
+
+	snprintf(cat->lang, sizeof(cat->lang), "%s", lang);
+	snprintf(pattern, sizeof(pattern), "*.%s.lmo", lang);
+
+	while ((de = readdir(dh)) != NULL)
+	{
+		if (!fnmatch(pattern, de->d_name, 0))
+		{
+			snprintf(path, sizeof(path), "%s/%s", dir, de->d_name);
+			ar = lmo_open(path);
+
+			if (ar)
+			{
+				ar->next = cat->archives;
+				cat->archives = ar;
+			}
+		}
+	}
+
+	closedir(dh);
+
+	cat->next = _lmo_catalogs;
+	_lmo_catalogs = cat;
+
+	if (!_lmo_active_catalog)
+		_lmo_active_catalog = cat;
+
+	return 0;
+
+err:
+	if (dh) closedir(dh);
+	if (cat) free(cat);
+
+	return -1;
+}
+
+int lmo_change_catalog(const char *lang)
+{
+	lmo_catalog_t *cat;
+
+	for (cat = _lmo_catalogs; cat; cat = cat->next)
+	{
+		if (!strncmp(cat->lang, lang, sizeof(cat->lang)))
+		{
+			_lmo_active_catalog = cat;
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+static lmo_entry_t * lmo_find_entry(lmo_archive_t *ar, uint32_t hash)
+{
+	unsigned int m, l, r;
+	uint32_t k;
+
+	l = 0;
+	r = ar->length - 1;
+
+	while (1)
+	{
+		m = l + ((r - l) / 2);
+
+		if (r < l)
+			break;
+
+		k = ntohl(ar->index[m].key_id);
+
+		if (k == hash)
+			return &ar->index[m];
+
+		if (k > hash)
+		{
+			if (!m)
+				break;
+
+			r = m - 1;
+		}
+		else
+		{
+			l = m + 1;
+		}
+	}
+
+	return NULL;
+}
+
+int lmo_translate(const char *key, int keylen, char **out, int *outlen)
+{
+	uint32_t hash;
+	lmo_entry_t *e;
+	lmo_archive_t *ar;
+
+	if (!key || !_lmo_active_catalog)
+		return -2;
+
+	hash = lmo_canon_hash(key, keylen);
+
+	for (ar = _lmo_active_catalog->archives; ar; ar = ar->next)
+	{
+		if ((e = lmo_find_entry(ar, hash)) != NULL)
+		{
+			*out = ar->mmap + ntohl(e->offset);
+			*outlen = ntohl(e->length);
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+void lmo_close_catalog(const char *lang)
+{
+	lmo_archive_t *ar, *next;
+	lmo_catalog_t *cat, *prev;
+
+	for (prev = NULL, cat = _lmo_catalogs; cat; prev = cat, cat = cat->next)
+	{
+		if (!strncmp(cat->lang, lang, sizeof(cat->lang)))
+		{
+			if (prev)
+				prev->next = cat->next;
+			else
+				_lmo_catalogs = cat->next;
+
+			for (ar = cat->archives; ar; ar = next)
+			{
+				next = ar->next;
+				lmo_close(ar);
+			}
+
+			free(cat);
+			break;
+		}
+	}
+}

third-party/luci-app-udp2raw/tools/po2lmo/src/template_lmo.h

@@ -0,0 +1,92 @@
+/*
+ * lmo - Lua Machine Objects - General header
+ *
+ *   Copyright (C) 2009-2012 Jo-Philipp Wich <xm@subsignal.org>
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+#ifndef _TEMPLATE_LMO_H_
+#define _TEMPLATE_LMO_H_
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <string.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <arpa/inet.h>
+#include <unistd.h>
+#include <errno.h>
+#include <fnmatch.h>
+#include <dirent.h>
+#include <ctype.h>
+#include <limits.h>
+
+#if (defined(__GNUC__) && defined(__i386__))
+#define sfh_get16(d) (*((const uint16_t *) (d)))
+#else
+#define sfh_get16(d) ((((uint32_t)(((const uint8_t *)(d))[1])) << 8)\
+					   +(uint32_t)(((const uint8_t *)(d))[0]) )
+#endif
+
+
+struct lmo_entry {
+	uint32_t key_id;
+	uint32_t val_id;
+	uint32_t offset;
+	uint32_t length;
+} __attribute__((packed));
+
+typedef struct lmo_entry lmo_entry_t;
+
+
+struct lmo_archive {
+	int         fd;
+	int	        length;
+	uint32_t    size;
+	lmo_entry_t *index;
+	char        *mmap;
+	char		*end;
+	struct lmo_archive *next;
+};
+
+typedef struct lmo_archive lmo_archive_t;
+
+
+struct lmo_catalog {
+	char lang[6];
+	struct lmo_archive *archives;
+	struct lmo_catalog *next;
+};
+
+typedef struct lmo_catalog lmo_catalog_t;
+
+
+uint32_t sfh_hash(const char *data, int len);
+uint32_t lmo_canon_hash(const char *data, int len);
+
+lmo_archive_t * lmo_open(const char *file);
+void lmo_close(lmo_archive_t *ar);
+
+
+extern lmo_catalog_t *_lmo_catalogs;
+extern lmo_catalog_t *_lmo_active_catalog;
+
+int lmo_load_catalog(const char *lang, const char *dir);
+int lmo_change_catalog(const char *lang);
+int lmo_translate(const char *key, int keylen, char **out, int *outlen);
+void lmo_close_catalog(const char *lang);
+
+#endif

third-party/udp2raw-cmake-makefile/CMakeLists.txt

@@ -2,10 +2,11 @@ cmake_minimum_required(VERSION 3.7)
 project(udp2raw_tunnel)
 
 set(CMAKE_CXX_STANDARD 11)
-set_source_files_properties(lib/aes.c lib/md5.c PROPERTIES LANGUAGE CXX )
+set_source_files_properties(lib/aes_faster_c/aes.c lib/aes_faster_c/wrapper.c lib/md5.c PROPERTIES LANGUAGE CXX )
 
 set(SOURCE_FILES
-        lib/aes.c
+        lib/aes_faster_c/aes.c
+	lib/aes_faster_c/wrapper.c
         lib/md5.c
         common.cpp
         encrypt.cpp
@@ -17,3 +18,4 @@ set(CMAKE_CXX_FLAGS "-Wall -Wextra -Wno-unused-variable -Wno-unused-parameter -W
 #set(CMAKE_LINK_LIBRARY_FLAG "-lrt")
 add_executable(udp2raw_cmake ${SOURCE_FILES})
 target_link_libraries(udp2raw_cmake rt)
+target_link_libraries(udp2raw_cmake pthread)

third-party/udp2raw-openwrt-makefile/LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2017 Yu Wang (wangyucn at gmail.com)
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

third-party/udp2raw-openwrt-makefile/Makefile

@@ -0,0 +1,55 @@
+#
+# Copyright (c) 2017 Yu Wang <wangyucn@gmail.com>
+#
+# This is free software, licensed under the MIT.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=udp2raw-tunnel
+PKG_VERSION:=20180111.1
+PKG_RELEASE:=2
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/wangyu-/udp2raw-tunnel.git
+PKG_SOURCE_VERSION:=a884b02b26e8c8d24cb74e006d4de11da2f6f567
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
+
+PKG_LICENSE:=MIT
+PKG_LICENSE_FILES:=LICENSE
+PKG_MAINTAINER:=Yu Wang
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/udp2raw-tunnel
+	SECTION:=net
+	CATEGORY:=Network
+	TITLE:=Tunnel which turns UDP Traffic into Encrypted FakeTCP/UDP/ICMP Traffic
+	URL:=https://github.com/wangyu-/udp2raw-tunnel
+endef
+
+define Package/udp2raw-tunnel/description
+	udp2raw-tunnel is a tunnel which turns UDP Traffic into Encrypted FakeTCP/UDP/ICMP Traffic by using Raw Socket.
+endef
+
+MAKE_FLAGS += cross2
+
+define Build/Configure
+	$(call Build/Configure/Default)
+	$(SED) 's/cc_cross[[:space:]]*=.*/cc_cross=$(TARGET_CXX)/' \
+		-e 's/\\".*shell git rev-parse HEAD.*\\"/\\"$(PKG_SOURCE_VERSION)\\"/' \
+		$(PKG_BUILD_DIR)/makefile
+endef
+
+define Package/udp2raw-tunnel/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/udp2raw_cross $(1)/usr/bin/udp2raw
+endef
+
+$(eval $(call BuildPackage,udp2raw-tunnel))