feat: add mail

mail/Dockerfile

@@ -0,0 +1,31 @@
+FROM alpine:3.15
+
+COPY ./conf/postfix /etc/postfix
+COPY ./conf/dovecot /etc/dovecot
+COPY ./conf/opendkim /etc/opendkim
+#ADD ./conf/clamav /etc/clamav
+COPY ./run.sh /
+
+RUN sed -i 's/dl-cdn.alpinelinux.org/mirrors.ustc.edu.cn/g' /etc/apk/repositories  \
+    && apk add \
+        postfix postfix-pgsql \
+        dovecot-pgsql dovecot-lmtpd dovecot-pop3d \
+        opendkim opendkim-utils \
+    && rm -rf /var/cache/apk
+
+#SMTP
+EXPOSE 25
+#POP3
+EXPOSE 110
+#IMAP
+EXPOSE 143
+#SMTPS
+EXPOSE 465
+#Submission
+EXPOSE 587
+#IMAPS
+EXPOSE 993
+#POP3S
+EXPOSE 995
+
+ENTRYPOINT ["/run.sh"]

mail/conf/clamav/clamd.conf

@@ -0,0 +1,794 @@
+##
+## Example config file for the Clam AV daemon
+## Please read the clamd.conf(5) manual before editing this file.
+##
+
+
+# Comment or remove the line below.
+# Example
+
+# Uncomment this option to enable logging.
+# LogFile must be writable for the user running daemon.
+# A full path is required.
+# Default: disabled
+LogFile /var/log/clamd.log
+
+# By default the log file is locked for writing - the lock protects against
+# running clamd multiple times (if want to run another clamd, please
+# copy the configuration file, change the LogFile variable, and run
+# the daemon with --config-file option).
+# This option disables log file locking.
+# Default: no
+#LogFileUnlock yes
+
+# Maximum size of the log file.
+# Value of 0 disables the limit.
+# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
+# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
+# in bytes just don't use modifiers. If LogFileMaxSize is enabled, log
+# rotation (the LogRotate option) will always be enabled.
+# Default: 1M
+#LogFileMaxSize 2M
+
+# Log time with each message.
+# Default: no
+LogTime yes
+
+# Also log clean files. Useful in debugging but drastically increases the
+# log size.
+# Default: no
+#LogClean yes
+
+# Use system logger (can work together with LogFile).
+# Default: no
+#LogSyslog yes
+
+# Specify the type of syslog messages - please refer to 'man syslog'
+# for facility names.
+# Default: LOG_LOCAL6
+#LogFacility LOG_MAIL
+
+# Enable verbose logging.
+# Default: no
+#LogVerbose yes
+
+# Enable log rotation. Always enabled when LogFileMaxSize is enabled.
+# Default: no
+#LogRotate yes
+
+# Enable Prelude output.
+# Default: no
+#PreludeEnable yes
+#
+# Set the name of the analyzer used by prelude-admin.
+# Default: ClamAV
+#PreludeAnalyzerName ClamAV
+
+# Log additional information about the infected file, such as its
+# size and hash, together with the virus name.
+#ExtendedDetectionInfo yes
+
+# This option allows you to save a process identifier of the listening
+# daemon (main thread).
+# This file will be owned by root, as long as clamd was started by root.
+# It is recommended that the directory where this file is stored is
+# also owned by root to keep other users from tampering with it.
+# Default: disabled
+PidFile /run/clamd.pid
+
+# Optional path to the global temporary directory.
+# Default: system specific (usually /tmp or /var/tmp).
+#TemporaryDirectory /var/tmp
+
+# Path to the database directory.
+# Default: hardcoded (depends on installation options)
+#DatabaseDirectory /var/lib/clamav
+
+# Only load the official signatures published by the ClamAV project.
+# Default: no
+#OfficialDatabaseOnly no
+
+# The daemon can work in local mode, network mode or both.
+# Due to security reasons we recommend the local mode.
+
+# Path to a local socket file the daemon will listen on.
+# Default: disabled (must be specified by a user)
+LocalSocket /run/clamd.sock
+
+# Sets the group ownership on the unix socket.
+# Default: disabled (the primary group of the user running clamd)
+#LocalSocketGroup virusgroup
+
+# Sets the permissions on the unix socket to the specified mode.
+# Default: disabled (socket is world accessible)
+#LocalSocketMode 660
+
+# Remove stale socket after unclean shutdown.
+# Default: yes
+#FixStaleSocket yes
+
+# TCP port address.
+# Default: no
+#TCPSocket 3310
+
+# TCP address.
+# By default we bind to INADDR_ANY, probably not wise.
+# Enable the following to provide some degree of protection
+# from the outside world. This option can be specified multiple
+# times if you want to listen on multiple IPs. IPv6 is now supported.
+# Default: no
+#TCPAddr localhost
+
+# Maximum length the queue of pending connections may grow to.
+# Default: 200
+#MaxConnectionQueueLength 30
+
+# Clamd uses FTP-like protocol to receive data from remote clients.
+# If you are using clamav-milter to balance load between remote clamd daemons
+# on firewall servers you may need to tune the options below.
+
+# Close the connection when the data size limit is exceeded.
+# The value should match your MTA's limit for a maximum attachment size.
+# Default: 25M
+#StreamMaxLength 10M
+
+# Limit port range.
+# Default: 1024
+#StreamMinPort 30000
+# Default: 2048
+#StreamMaxPort 32000
+
+# Maximum number of threads running at the same time.
+# Default: 10
+#MaxThreads 20
+
+# Waiting for data from a client socket will timeout after this time (seconds).
+# Default: 120
+#ReadTimeout 300
+
+# This option specifies the time (in seconds) after which clamd should
+# timeout if a client doesn't provide any initial command after connecting.
+# Default: 30
+#CommandReadTimeout 30
+
+# This option specifies how long to wait (in milliseconds) if the send buffer
+# is full.
+# Keep this value low to prevent clamd hanging.
+#
+# Default: 500
+#SendBufTimeout 200
+
+# Maximum number of queued items (including those being processed by
+# MaxThreads threads).
+# It is recommended to have this value at least twice MaxThreads if possible.
+# WARNING: you shouldn't increase this too much to avoid running out  of file
+# descriptors, the following condition should hold:
+# MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE (usual
+# max is 1024).
+#
+# Default: 100
+#MaxQueue 200
+
+# Waiting for a new job will timeout after this time (seconds).
+# Default: 30
+#IdleTimeout 60
+
+# Don't scan files and directories matching regex
+# This directive can be used multiple times
+# Default: scan all
+#ExcludePath ^/proc/
+#ExcludePath ^/sys/
+
+# Maximum depth directories are scanned at.
+# Default: 15
+#MaxDirectoryRecursion 20
+
+# Follow directory symlinks.
+# Default: no
+#FollowDirectorySymlinks yes
+
+# Follow regular file symlinks.
+# Default: no
+#FollowFileSymlinks yes
+
+# Scan files and directories on other filesystems.
+# Default: yes
+#CrossFilesystems yes
+
+# Perform a database check.
+# Default: 600 (10 min)
+#SelfCheck 600
+
+# Enable non-blocking (multi-threaded/concurrent) database reloads.
+# This feature will temporarily load a second scanning engine while scanning
+# continues using the first engine. Once loaded, the new engine takes over.
+# The old engine is removed as soon as all scans using the old engine have
+# completed.
+# This feature requires more RAM, so this option is provided in case users are
+# willing to block scans during reload in exchange for lower RAM requirements.
+# Default: yes
+#ConcurrentDatabaseReload no
+
+# Execute a command when virus is found. In the command string %v will
+# be replaced with the virus name and %f will be replaced with the file name.
+# Additionally, two environment variables will be defined: $CLAM_VIRUSEVENT_FILENAME
+# and $CLAM_VIRUSEVENT_VIRUSNAME.
+# Default: no
+#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v in %f"
+
+# Run as another user (clamd must be started by root for this option to work)
+# Default: don't drop privileges
+User clamav
+
+# Stop daemon when libclamav reports out of memory condition.
+#ExitOnOOM yes
+
+# Don't fork into background.
+# Default: no
+#Foreground yes
+
+# Enable debug messages in libclamav.
+# Default: no
+#Debug yes
+
+# Do not remove temporary files (for debug purposes).
+# Default: no
+#LeaveTemporaryFiles yes
+
+# Permit use of the ALLMATCHSCAN command. If set to no, clamd will reject
+# any ALLMATCHSCAN command as invalid.
+# Default: yes
+#AllowAllMatchScan no
+
+# Detect Possibly Unwanted Applications.
+# Default: no
+#DetectPUA yes
+
+# Exclude a specific PUA category. This directive can be used multiple times.
+# See https://github.com/vrtadmin/clamav-faq/blob/master/faq/faq-pua.md for
+# the complete list of PUA categories.
+# Default: Load all categories (if DetectPUA is activated)
+#ExcludePUA NetTool
+#ExcludePUA PWTool
+
+# Only include a specific PUA category. This directive can be used multiple
+# times.
+# Default: Load all categories (if DetectPUA is activated)
+#IncludePUA Spy
+#IncludePUA Scanner
+#IncludePUA RAT
+
+# This option causes memory or nested map scans to dump the content to disk.
+# If you turn on this option, more data is written to disk and is available
+# when the LeaveTemporaryFiles option is enabled.
+#ForceToDisk yes
+
+# This option allows you to disable the caching feature of the engine. By
+# default, the engine will store an MD5 in a cache of any files that are
+# not flagged as virus or that hit limits checks. Disabling the cache will
+# have a negative performance impact on large scans.
+# Default: no
+#DisableCache yes
+
+# In some cases (eg. complex malware, exploits in graphic files, and others),
+# ClamAV uses special algorithms to detect abnormal patterns and behaviors that
+# may be malicious.  This option enables alerting on such heuristically
+# detected potential threats.
+# Default: yes
+#HeuristicAlerts yes
+
+# Allow heuristic alerts to take precedence.
+# When enabled, if a heuristic scan (such as phishingScan) detects
+# a possible virus/phish it will stop scan immediately. Recommended, saves CPU
+# scan-time.
+# When disabled, virus/phish detected by heuristic scans will be reported only
+# at the end of a scan. If an archive contains both a heuristically detected
+# virus/phish, and a real malware, the real malware will be reported
+#
+# Keep this disabled if you intend to handle "Heuristics.*" viruses
+# differently from "real" malware.
+# If a non-heuristically-detected virus (signature-based) is found first,
+# the scan is interrupted immediately, regardless of this config option.
+#
+# Default: no
+#HeuristicScanPrecedence yes
+
+
+##
+## Heuristic Alerts
+##
+
+# With this option clamav will try to detect broken executables (both PE and
+# ELF) and alert on them with the Broken.Executable heuristic signature.
+# Default: no
+#AlertBrokenExecutables yes
+
+# With this option clamav will try to detect broken media file (JPEG,
+# TIFF, PNG, GIF) and alert on them with a Broken.Media heuristic signature.
+# Default: no
+#AlertBrokenMedia yes
+
+# Alert on encrypted archives _and_ documents with heuristic signature
+# (encrypted .zip, .7zip, .rar, .pdf).
+# Default: no
+#AlertEncrypted yes
+
+# Alert on encrypted archives with heuristic signature (encrypted .zip, .7zip,
+# .rar).
+# Default: no
+#AlertEncryptedArchive yes
+
+# Alert on encrypted archives with heuristic signature (encrypted .pdf).
+# Default: no
+#AlertEncryptedDoc yes
+
+# With this option enabled OLE2 files containing VBA macros, which were not
+# detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros".
+# Default: no
+#AlertOLE2Macros yes
+
+# Alert on SSL mismatches in URLs, even if the URL isn't in the database.
+# This can lead to false positives.
+# Default: no
+#AlertPhishingSSLMismatch yes
+
+# Alert on cloaked URLs, even if URL isn't in database.
+# This can lead to false positives.
+# Default: no
+#AlertPhishingCloak yes
+
+# Alert on raw DMG image files containing partition intersections
+# Default: no
+#AlertPartitionIntersection yes
+
+
+##
+## Executable files
+##
+
+# PE stands for Portable Executable - it's an executable file format used
+# in all 32 and 64-bit versions of Windows operating systems. This option
+# allows ClamAV to perform a deeper analysis of executable files and it's also
+# required for decompression of popular executable packers such as UPX, FSG,
+# and Petite. If you turn off this option, the original files will still be
+# scanned, but without additional processing.
+# Default: yes
+#ScanPE yes
+
+# Certain PE files contain an authenticode signature. By default, we check
+# the signature chain in the PE file against a database of trusted and
+# revoked certificates if the file being scanned is marked as a virus.
+# If any certificate in the chain validates against any trusted root, but
+# does not match any revoked certificate, the file is marked as trusted.
+# If the file does match a revoked certificate, the file is marked as virus.
+# The following setting completely turns off authenticode verification.
+# Default: no
+#DisableCertCheck yes
+
+# Executable and Linking Format is a standard format for UN*X executables.
+# This option allows you to control the scanning of ELF files.
+# If you turn off this option, the original files will still be scanned, but
+# without additional processing.
+# Default: yes
+#ScanELF yes
+
+
+##
+## Documents
+##
+
+# This option enables scanning of OLE2 files, such as Microsoft Office
+# documents and .msi files.
+# If you turn off this option, the original files will still be scanned, but
+# without additional processing.
+# Default: yes
+#ScanOLE2 yes
+
+# This option enables scanning within PDF files.
+# If you turn off this option, the original files will still be scanned, but
+# without decoding and additional processing.
+# Default: yes
+#ScanPDF yes
+
+# This option enables scanning within SWF files.
+# If you turn off this option, the original files will still be scanned, but
+# without decoding and additional processing.
+# Default: yes
+#ScanSWF yes
+
+# This option enables scanning xml-based document files supported by libclamav.
+# If you turn off this option, the original files will still be scanned, but
+# without additional processing.
+# Default: yes
+#ScanXMLDOCS yes
+
+# This option enables scanning of HWP3 files.
+# If you turn off this option, the original files will still be scanned, but
+# without additional processing.
+# Default: yes
+#ScanHWP3 yes
+
+
+##
+## Mail files
+##
+
+# Enable internal e-mail scanner.
+# If you turn off this option, the original files will still be scanned, but
+# without parsing individual messages/attachments.
+# Default: yes
+#ScanMail yes
+
+# Scan RFC1341 messages split over many emails.
+# You will need to periodically clean up $TemporaryDirectory/clamav-partial
+# directory.
+# WARNING: This option may open your system to a DoS attack.
+#	   Never use it on loaded servers.
+# Default: no
+#ScanPartialMessages yes
+
+# With this option enabled ClamAV will try to detect phishing attempts by using
+# HTML.Phishing and Email.Phishing NDB signatures.
+# Default: yes
+#PhishingSignatures no
+
+# With this option enabled ClamAV will try to detect phishing attempts by
+# analyzing URLs found in emails using WDB and PDB signature databases.
+# Default: yes
+#PhishingScanURLs no
+
+
+##
+## Data Loss Prevention (DLP)
+##
+
+# Enable the DLP module
+# Default: No
+#StructuredDataDetection yes
+
+# This option sets the lowest number of Credit Card numbers found in a file
+# to generate a detect.
+# Default: 3
+#StructuredMinCreditCardCount 5
+
+# With this option enabled the DLP module will search for valid Credit Card
+# numbers only. Debit and Private Label cards will not be searched.
+# Default: no
+#StructuredCCOnly yes
+
+# This option sets the lowest number of Social Security Numbers found
+# in a file to generate a detect.
+# Default: 3
+#StructuredMinSSNCount 5
+
+# With this option enabled the DLP module will search for valid
+# SSNs formatted as xxx-yy-zzzz
+# Default: yes
+#StructuredSSNFormatNormal yes
+
+# With this option enabled the DLP module will search for valid
+# SSNs formatted as xxxyyzzzz
+# Default: no
+#StructuredSSNFormatStripped yes
+
+
+##
+## HTML
+##
+
+# Perform HTML normalisation and decryption of MS Script Encoder code.
+# Default: yes
+# If you turn off this option, the original files will still be scanned, but
+# without additional processing.
+#ScanHTML yes
+
+
+##
+## Archives
+##
+
+# ClamAV can scan within archives and compressed files.
+# If you turn off this option, the original files will still be scanned, but
+# without unpacking and additional processing.
+# Default: yes
+#ScanArchive yes
+
+
+##
+## Limits
+##
+
+# The options below protect your system against Denial of Service attacks
+# using archive bombs.
+
+# This option sets the maximum amount of time to a scan may take.
+# In this version, this field only affects the scan time of ZIP archives.
+# Value of 0 disables the limit.
+# Note: disabling this limit or setting it too high may result allow scanning
+# of certain files to lock up the scanning process/threads resulting in a
+# Denial of Service.
+# Time is in milliseconds.
+# Default: 120000
+#MaxScanTime 300000
+
+# This option sets the maximum amount of data to be scanned for each input
+# file. Archives and other containers are recursively extracted and scanned
+# up to this value.
+# Value of 0 disables the limit
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 100M
+#MaxScanSize 150M
+
+# Files larger than this limit won't be scanned. Affects the input file itself
+# as well as files contained inside it (when the input file is an archive, a
+# document or some other kind of container).
+# Value of 0 disables the limit.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Technical design limitations prevent ClamAV from scanning files greater than
+# 2 GB at this time.
+# Default: 25M
+#MaxFileSize 30M
+
+# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
+# file, all files within it will also be scanned. This options specifies how
+# deeply the process should be continued.
+# Note: setting this limit too high may result in severe damage to the system.
+# Default: 17
+#MaxRecursion 10
+
+# Number of files to be scanned within an archive, a document, or any other
+# container file.
+# Value of 0 disables the limit.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 10000
+#MaxFiles 15000
+
+# Maximum size of a file to check for embedded PE. Files larger than this value
+# will skip the additional analysis step.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 10M
+#MaxEmbeddedPE 10M
+
+# Maximum size of a HTML file to normalize. HTML files larger than this value
+# will not be normalized or scanned.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 10M
+#MaxHTMLNormalize 10M
+
+# Maximum size of a normalized HTML file to scan. HTML files larger than this
+# value after normalization will not be scanned.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 2M
+#MaxHTMLNoTags 2M
+
+# Maximum size of a script file to normalize. Script content larger than this
+# value will not be normalized or scanned.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 5M
+#MaxScriptNormalize 5M
+
+# Maximum size of a ZIP file to reanalyze type recognition. ZIP files larger
+# than this value will skip the step to potentially reanalyze as PE.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 1M
+#MaxZipTypeRcg 1M
+
+# This option sets the maximum number of partitions of a raw disk image to be
+# scanned.
+# Raw disk images with more partitions than this value will have up to
+# the value number partitions scanned. Negative values are not allowed.
+# Note: setting this limit too high may result in severe damage or impact
+# performance.
+# Default: 50
+#MaxPartitions 128
+
+# This option sets the maximum number of icons within a PE to be scanned.
+# PE files with more icons than this value will have up to the value number
+# icons scanned.
+# Negative values are not allowed.
+# WARNING: setting this limit too high may result in severe damage or impact
+# performance.
+# Default: 100
+#MaxIconsPE 200
+
+# This option sets the maximum recursive calls for HWP3 parsing during
+# scanning. HWP3 files using more than this limit will be terminated and
+# alert the user.
+# Scans will be unable to scan any HWP3 attachments if the recursive limit
+# is reached.
+# Negative values are not allowed.
+# WARNING: setting this limit too high may result in severe damage or impact
+# performance.
+# Default: 16
+#MaxRecHWP3 16
+
+# This option sets the maximum calls to the PCRE match function during
+# an instance of regex matching.
+# Instances using more than this limit will be terminated and alert the user
+# but the scan will continue.
+# For more information on match_limit, see the PCRE documentation.
+# Negative values are not allowed.
+# WARNING: setting this limit too high may severely impact performance.
+# Default: 100000
+#PCREMatchLimit 20000
+
+# This option sets the maximum recursive calls to the PCRE match function
+# during an instance of regex matching.
+# Instances using more than this limit will be terminated and alert the user
+# but the scan will continue.
+# For more information on match_limit_recursion, see the PCRE documentation.
+# Negative values are not allowed and values > PCREMatchLimit are superfluous.
+# WARNING: setting this limit too high may severely impact performance.
+# Default: 2000
+#PCRERecMatchLimit 10000
+
+# This option sets the maximum filesize for which PCRE subsigs will be
+# executed. Files exceeding this limit will not have PCRE subsigs executed
+# unless a subsig is encompassed to a smaller buffer.
+# Negative values are not allowed.
+# Setting this value to zero disables the limit.
+# WARNING: setting this limit too high or disabling it may severely impact
+# performance.
+# Default: 25M
+#PCREMaxFileSize 100M
+
+# When AlertExceedsMax is set, files exceeding the MaxFileSize, MaxScanSize, or
+# MaxRecursion limit will be flagged with the virus name starting with
+# "Heuristics.Limits.Exceeded".
+# Default: no
+#AlertExceedsMax yes
+
+##
+## On-access Scan Settings
+##
+
+# Don't scan files larger than OnAccessMaxFileSize
+# Value of 0 disables the limit.
+# Default: 5M
+#OnAccessMaxFileSize 10M
+
+# Max number of scanning threads to allocate to the OnAccess thread pool at
+# startup. These threads are the ones responsible for creating a connection
+# with the daemon and kicking off scanning after an event has been processed.
+# To prevent clamonacc from consuming all clamd's resources keep this lower
+# than clamd's max threads.
+# Default: 5
+#OnAccessMaxThreads 10
+
+# Max amount of time (in milliseconds) that the OnAccess client should spend
+# for every connect, send, and recieve attempt when communicating with clamd
+# via curl.
+# Default: 5000 (5 seconds)
+# OnAccessCurlTimeout 10000
+
+# Toggles dynamic directory determination. Allows for recursively watching
+# include paths.
+# Default: no
+#OnAccessDisableDDD yes
+
+# Set the include paths (all files inside them will be scanned). You can have
+# multiple OnAccessIncludePath directives but each directory must be added
+# in a separate line.
+# Default: disabled
+#OnAccessIncludePath /home
+#OnAccessIncludePath /students
+
+# Set the exclude paths. All subdirectories are also excluded.
+# Default: disabled
+#OnAccessExcludePath /home/user
+
+# Modifies fanotify blocking behaviour when handling permission events.
+# If off, fanotify will only notify if the file scanned is a virus,
+# and not perform any blocking.
+# Default: no
+#OnAccessPrevention yes
+
+# When using prevention, if this option is turned on, any errors that occur
+# during scanning will result in the event attempt being denied. This could
+# potentially lead to unwanted system behaviour with certain configurations,
+# so the client defaults this to off and prefers allowing access events in
+# case of scan or connection error.
+# Default: no
+#OnAccessDenyOnError yes
+
+# Toggles extra scanning and notifications when a file or directory is
+# created or moved.
+# Requires the  DDD system to kick-off extra scans.
+# Default: no
+#OnAccessExtraScanning yes
+
+# Set the  mount point to be scanned. The mount point specified, or the mount
+# point containing the specified directory will be watched. If any directories
+# are specified, this option will preempt (disable and ignore all options
+# related to) the DDD system. This option will result in verdicts only.
+# Note that prevention is explicitly disallowed to prevent common, fatal
+# misconfigurations. (e.g. watching "/" with prevention on and no exclusions
+# made on vital system directories)
+# It can be used multiple times.
+# Default: disabled
+#OnAccessMountPath /
+#OnAccessMountPath /home/user
+
+# With this option you can exclude the root UID (0). Processes run under
+# root with be able to access all files without triggering scans or
+# permission denied events.
+# Note that if clamd cannot check the uid of the process that generated an
+# on-access scan event (e.g., because OnAccessPrevention was not enabled, and
+# the process already exited), clamd will perform a scan.  Thus, setting
+# OnAccessExcludeRootUID is not *guaranteed* to prevent every access by the
+# root user from triggering a scan (unless OnAccessPrevention is enabled).
+# Default: no
+#OnAccessExcludeRootUID no
+
+# With this option you can exclude specific UIDs. Processes with these UIDs
+# will be able to access all files without triggering scans or permission
+# denied events.
+# This option can be used multiple times (one per line).
+# Using a value of 0 on any line will disable this option entirely.
+# To exclude the root UID (0) please enable the OnAccessExcludeRootUID
+# option.
+# Also note that if clamd cannot check the uid of the process that generated an
+# on-access scan event (e.g., because OnAccessPrevention was not enabled, and
+# the process already exited), clamd will perform a scan.  Thus, setting
+# OnAccessExcludeUID is not *guaranteed* to prevent every access by the
+# specified uid from triggering a scan (unless OnAccessPrevention is enabled).
+# Default: disabled
+#OnAccessExcludeUID -1
+
+# This option allows exclusions via user names when using the on-access
+# scanning client. It can be used multiple times.
+# It has the same potential race condition limitations of the
+# OnAccessExcludeUID option.
+# Default: disabled
+#OnAccessExcludeUname clamav
+
+# Number of times the OnAccess client will retry a failed scan due to
+# connection problems (or other issues).
+# Default: 0
+#OnAccessRetryAttempts 3
+
+##
+## Bytecode
+##
+
+# With this option enabled ClamAV will load bytecode from the database.
+# It is highly recommended you keep this option on, otherwise you'll miss
+# detections for many new viruses.
+# Default: yes
+#Bytecode yes
+
+# Set bytecode security level.
+# Possible values:
+#   None -      No security at all, meant for debugging.
+#               DO NOT USE THIS ON PRODUCTION SYSTEMS.
+#               This value is only available if clamav was built
+#               with --enable-debug!
+#   TrustSigned - Trust bytecode loaded from signed .c[lv]d files, insert
+#               runtime safety checks for bytecode loaded from other sources.
+#   Paranoid -  Don't trust any bytecode, insert runtime checks for all.
+# Recommended: TrustSigned, because bytecode in .cvd files already has these
+# checks.
+# Note that by default only signed bytecode is loaded, currently you can only
+# load unsigned bytecode in --enable-debug mode.
+#
+# Default: TrustSigned
+#BytecodeSecurity TrustSigned
+
+# Allow loading bytecode from outside digitally signed .c[lv]d files.
+# **Caution**: You should NEVER run bytecode signatures from untrusted sources.
+# Doing so may result in arbitrary code execution.
+# Default: no
+#BytecodeUnsigned yes
+
+# Set bytecode timeout in milliseconds.
+#
+# Default: 5000
+# BytecodeTimeout 1000

mail/conf/clamav/freshclam.conf

@@ -0,0 +1,204 @@
+##
+## Example config file for freshclam
+## Please read the freshclam.conf(5) manual before editing this file.
+##
+
+
+# Comment or remove the line below.
+# Example
+
+# Path to the database directory.
+# WARNING: It must match clamd.conf's directive!
+# Default: hardcoded (depends on installation options)
+#DatabaseDirectory /var/lib/clamav
+
+# Path to the log file (make sure it has proper permissions)
+# Default: disabled
+UpdateLogFile /var/log/clamav/freshclam.log
+
+# Maximum size of the log file.
+# Value of 0 disables the limit.
+# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
+# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes).
+# in bytes just don't use modifiers. If LogFileMaxSize is enabled,
+# log rotation (the LogRotate option) will always be enabled.
+# Default: 1M
+#LogFileMaxSize 2M
+
+# Log time with each message.
+# Default: no
+#LogTime yes
+
+# Enable verbose logging.
+# Default: no
+#LogVerbose yes
+
+# Use system logger (can work together with UpdateLogFile).
+# Default: no
+#LogSyslog yes
+
+# Specify the type of syslog messages - please refer to 'man syslog'
+# for facility names.
+# Default: LOG_LOCAL6
+#LogFacility LOG_MAIL
+
+# Enable log rotation. Always enabled when LogFileMaxSize is enabled.
+# Default: no
+#LogRotate yes
+
+# This option allows you to save the process identifier of the daemon
+# This file will be owned by root, as long as freshclam was started by root.
+# It is recommended that the directory where this file is stored is
+# also owned by root to keep other users from tampering with it.
+# Default: disabled
+PidFile /run/clamav/freshclam.pid
+
+# By default when started freshclam drops privileges and switches to the
+# "clamav" user. This directive allows you to change the database owner.
+# Default: clamav (may depend on installation options)
+DatabaseOwner clamav
+
+# Use DNS to verify virus database version. FreshClam uses DNS TXT records
+# to verify database and software versions. With this directive you can change
+# the database verification domain.
+# WARNING: Do not touch it unless you're configuring freshclam to use your
+# own database verification domain.
+# Default: current.cvd.clamav.net
+#DNSDatabaseInfo current.cvd.clamav.net
+
+# database.clamav.net is now the primary domain name to be used world-wide.
+# Now that CloudFlare is being used as our Content Delivery Network (CDN),
+# this one domain name works world-wide to direct freshclam to the closest
+# geographic endpoint.
+# If the old db.XY.clamav.net domains are set, freshclam will automatically
+# use database.clamav.net instead.
+DatabaseMirror database.clamav.net
+
+# How many attempts to make before giving up.
+# Default: 3 (per mirror)
+#MaxAttempts 5
+
+# With this option you can control scripted updates. It's highly recommended
+# to keep it enabled.
+# Default: yes
+ScriptedUpdates yes
+
+# By default freshclam will keep the local databases (.cld) uncompressed to
+# make their handling faster. With this option you can enable the compression;
+# the change will take effect with the next database update.
+# Default: no
+#CompressLocalDatabase no
+
+# With this option you can provide custom sources for database files.
+# This option can be used multiple times. Support for:
+#   http(s)://, ftp(s)://, or file://
+# Default: no custom URLs
+#DatabaseCustomURL http://myserver.example.com/mysigs.ndb
+#DatabaseCustomURL https://myserver.example.com/mysigs.ndb
+#DatabaseCustomURL https://myserver.example.com:4567/allow_list.wdb
+#DatabaseCustomURL ftp://myserver.example.com/example.ldb
+#DatabaseCustomURL ftps://myserver.example.com:4567/example.ndb
+#DatabaseCustomURL file:///mnt/nfs/local.hdb
+
+# This option allows you to easily point freshclam to private mirrors.
+# If PrivateMirror is set, freshclam does not attempt to use DNS
+# to determine whether its databases are out-of-date, instead it will
+# use the If-Modified-Since request or directly check the headers of the
+# remote database files. For each database, freshclam first attempts
+# to download the CLD file. If that fails, it tries to download the
+# CVD file. This option overrides DatabaseMirror, DNSDatabaseInfo
+# and ScriptedUpdates. It can be used multiple times to provide
+# fall-back mirrors.
+# Default: disabled
+#PrivateMirror mirror1.example.com
+#PrivateMirror mirror2.example.com
+
+# Number of database checks per day.
+# Default: 12 (every two hours)
+#Checks 24
+
+# Proxy settings
+# The HTTPProxyServer may be prefixed with [scheme]:// to specify which kind
+# of proxy is used.
+#   http://     HTTP Proxy. Default when no scheme or proxy type is specified.
+#   https://    HTTPS Proxy. (Added in 7.52.0 for OpenSSL, GnuTLS and NSS)
+#   socks4://   SOCKS4 Proxy.
+#   socks4a://  SOCKS4a Proxy. Proxy resolves URL hostname.
+#   socks5://   SOCKS5 Proxy.
+#   socks5h://  SOCKS5 Proxy. Proxy resolves URL hostname.
+# Default: disabled
+#HTTPProxyServer https://proxy.example.com
+#HTTPProxyPort 1234
+#HTTPProxyUsername myusername
+#HTTPProxyPassword mypass
+
+# If your servers are behind a firewall/proxy which applies User-Agent
+# filtering you can use this option to force the use of a different
+# User-Agent header.
+# As of ClamAV 0.103.3, this setting may not be used when updating from the
+# clamav.net CDN and can only be used when updating from a private mirror.
+# Default: clamav/version_number (OS: ..., ARCH: ..., CPU: ..., UUID: ...)
+#HTTPUserAgent SomeUserAgentIdString
+
+# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
+# multi-homed systems.
+# Default: Use OS'es default outgoing IP address.
+#LocalIPAddress aaa.bbb.ccc.ddd
+
+# Send the RELOAD command to clamd.
+# Default: no
+NotifyClamd /etc/clamav/clamd.conf
+
+# Run command after successful database update.
+# Use EXIT_1 to return 1 after successful database update.
+# Default: disabled
+#OnUpdateExecute command
+
+# Run command when database update process fails.
+# Default: disabled
+#OnErrorExecute command
+
+# Run command when freshclam reports outdated version.
+# In the command string %v will be replaced by the new version number.
+# Default: disabled
+#OnOutdatedExecute command
+
+# Don't fork into background.
+# Default: no
+#Foreground yes
+
+# Enable debug messages in libclamav.
+# Default: no
+#Debug yes
+
+# Timeout in seconds when connecting to database server.
+# Default: 30
+#ConnectTimeout 60
+
+# Maximum time in seconds for each download operation. 0 means no timeout.
+# Default: 0
+#ReceiveTimeout 1800
+
+# With this option enabled, freshclam will attempt to load new databases into
+# memory to make sure they are properly handled by libclamav before replacing
+# the old ones.
+# Tip: This feature uses a lot of RAM. If your system has limited RAM and you
+# are actively running ClamD or ClamScan during the update, then you may need
+# to set `TestDatabases no`.
+# Default: yes
+#TestDatabases no
+
+# This option enables downloading of bytecode.cvd, which includes additional
+# detection mechanisms and improvements to the ClamAV engine.
+# Default: yes
+#Bytecode no
+
+# Include an optional signature databases (opt-in).
+# This option can be used multiple times.
+#ExtraDatabase dbname1
+#ExtraDatabase dbname2
+
+# Exclude a standard signature database (opt-out).
+# This option can be used multiple times.
+#ExcludeDatabase dbname1
+#ExcludeDatabase dbname2

mail/conf/dovecot/dovecot-sql-mysql.conf

@@ -0,0 +1,24 @@
+driver = mysql
+connect = host=dbserver dbname=postfix user=postfix password=password
+default_pass_scheme = MD5-CRYPT
+
+user_query = \
+    SELECT \
+        '/var/mail/domains/%u/' as home, \
+        'maildir:/var/mail/domains/%u/' as mail, \
+        8 AS uid, \
+        12 AS gid, \
+        concat('dirsize:storage=', quota) AS quota \
+    FROM mailbox \
+    WHERE username = '%u' AND active = '1'
+
+password_query = \
+    SELECT \
+        username as user, \
+        password, \
+        '/var/mail/domains/%u/' as userdb_home, \
+        'maildir:/var/mail/domains/%u/' as userdb_mail, \
+        8 as userdb_uid, \
+        12 as userdb_gid \
+    FROM mailbox \
+    WHERE username = '%u' AND active = '1'

mail/conf/dovecot/dovecot-sql-pgsql.conf

@@ -0,0 +1,22 @@
+driver = pgsql
+connect = host=dbserver dbname=postfix user=postgres password=psqlpass
+default_pass_scheme = MD5-CRYPT
+
+user_query = \
+    SELECT \
+        '/var/mail/domains/%u/' as home, \
+        'maildir:/var/mail/domains/%u/' as mail, \
+        8 as uid, \
+        12 as gid\
+    FROM mailbox \
+    WHERE username = '%u' AND active = true
+
+password_query = SELECT \
+    username AS user, \
+    password, \
+    8 as userdb_uid, \
+    12 as userdb_gid, \
+    '/var/mail/domains/' || maildir AS userdb_home, \
+    '/var/mail/domains/' || maildir AS userdb_mail \
+    FROM mailbox \
+    WHERE username = '%u' AND active = true

mail/conf/dovecot/dovecot.conf

@@ -0,0 +1,79 @@
+# debug
+auth_debug = yes
+auth_debug_passwords=  no
+mail_debug = no
+
+first_valid_uid = 8
+#last_valid_uid = 8
+postmaster_address = admin@example.com
+protocols = "imap lmtp pop3"
+auth_mechanisms = plain login
+
+disable_plaintext_auth = no
+
+#mail_location = maildir:/var/lib/vmail/%d/%n
+mail_location = maildir:/var/mail/domains/%u/
+mail_gid = mail
+mail_uid = vmail
+
+namespace inbox {
+  inbox = yes
+  location =
+  mailbox Drafts {
+    special_use = \Drafts
+  }
+  mailbox Junk {
+    special_use = \Junk
+  }
+  mailbox Sent {
+    special_use = \Sent
+  }
+  mailbox "Sent Messages" {
+    special_use = \Sent
+  }
+  mailbox Trash {
+    special_use = \Trash
+  }
+  prefix =
+}
+
+passdb {
+  driver = sql
+  args = /etc/dovecot/dovecot-sql-pgsql.conf
+}
+
+userdb {
+  driver = sql
+  args = /etc/dovecot/dovecot-sql-pgsql.conf
+}
+
+
+service auth {
+  # Postfix smtp-auth
+  unix_listener /var/spool/postfix/private/auth {
+    mode = 0660
+    user = postfix
+    group = postfix
+  }
+}
+
+service imap {
+    executable = imap
+}
+
+service lmtp {
+  unix_listener /var/spool/postfix/private/dovecot-lmtp {
+    mode = 0600
+    user = postfix
+    group = postfix
+  }
+}
+
+#ssl_cert = </etc/ssl/dovecot/server.pem
+#ssl_cipher_list = ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA
+#ssl_dh_parameters_length = 2048
+#ssl_key = </etc/ssl/dovecot/server.key
+#ssl_prefer_server_ciphers = yes
+#ssl_min_protocol = TLSv1.2
+
+log_path = /var/log/dovecot.log

mail/conf/opendkim/KeyTable

@@ -0,0 +1,3 @@
+default._domainkey.2a436487427d 2a436487427d:default:/etc/opendkim/keys/2a436487427d/default.private
+default._domainkey.9509fbb20ce0 9509fbb20ce0:default:/etc/opendkim/keys/9509fbb20ce0/default.private
+default._domainkey.9509fbb20ce0 9509fbb20ce0:default:/etc/opendkim/keys/9509fbb20ce0/default.private

mail/conf/opendkim/SigningTable

@@ -0,0 +1,3 @@
+*@2a436487427d default._domainkey.2a436487427d
+*@9509fbb20ce0 default._domainkey.9509fbb20ce0
+*@esin.io default._domainkey.2a436487427d

mail/conf/opendkim/TrustedHosts

@@ -0,0 +1,4 @@
+localhost
+2a436487427d
+9509fbb20ce0
+9509fbb20ce0

mail/conf/opendkim/keys/2a436487427d/default.private

@@ -0,0 +1,15 @@
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----

mail/conf/opendkim/keys/2a436487427d/default.txt

@@ -0,0 +1,2 @@
+default._domainkey	IN	TXT	( "v=DKIM1; k=rsa; "
+	  "p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDqnjC34hWdCIEG+Y8qD3yHLkwIziH+H0pNQwwEkKf4VpT3HTfJFxlPtKNpyFlAaclBd3BrtYkcvxr99qNjFdwNzPZJ5Fxo4Ug/9aP6e/t9DYlqBh/gdqCxsnp9rInoTJBq7D1qiUljr9dmbURVwbggqkrP2l8UJyO1yw562ubAfwIDAQAB" )  ; ----- DKIM key default for 2a436487427d

mail/conf/opendkim/keys/9509fbb20ce0/default.private

@@ -0,0 +1,15 @@
+-----BEGIN RSA PRIVATE KEY-----
+MIICXQIBAAKBgQChHkpXhl+izKhPFIgniNaVPgrZtGqHmMY2iHHrhwMS8x6y6FRi
+XQd+jWkMMDon9H+jNP2Yk8KjolfrX0KEg6l7FWeHGJKwqsltp7x1nx1Qf1paqN5O
+6Z7QySjCsltjA+Gpepzm93nTPg0Iai1MFpOYbugTSjNrdMbANRzu3dRegwIDAQAB
+AoGAZ+xBx3LE/R1E8r0rlVSOFHWQShw1GoFQWJxp3qGXOgHXK07wHwIic16DA3mY
+CW2LZponeOLWCPYN/6PSI+dIyTVmDQcxHj++ZXsU/dCXX2NUydjaC1yyVo8xp/N7
+s8Ap8abgQphrWZEppd3Of2MoMgG7NehgQyT+EkPj/x5evwECQQDLYPydO5JvQ9r5
+ALJkHhHs4OCXSfGPPBqIXva2xhVaoOs1TjKy+oNpPZatRMAFI7mI/sNvB0O2cg0J
+CG/WDGK3AkEAys4h8oiyMBu7B+lYzfUSCC2fxo7ptwhJuE78Zlc+9TvKYLeusSFo
+RTDIUWyJcR/mZVjLFiUb4+tUZU7PPwZmlQJBAJkrAPU1oVIUq3xubuuBzgQ1VE/8
+S2WRYXYk9u+t/PUVTi8GJp6ulnuS+8Cgj3EPd7LaE7uxn+huuqx74yY0i78CQDd1
+u27Z1vC1BKabN3/LHw1BfMoN1vgIujA+2WMbRMpHeYaNdKZX3m3dc0phBgz7jkP0
+zkTWDRR9DG1P6fjwRSkCQQDGMVIAEh0kftOxKU3n7qms0zbBDycWikLMQSLWZhYY
+ZGblN7sKAkbIw6aHlDy4mMAS+zaiCVKQ2ReT0HqcHZVs
+-----END RSA PRIVATE KEY-----

mail/conf/opendkim/keys/9509fbb20ce0/default.txt

@@ -0,0 +1,2 @@
+default._domainkey	IN	TXT	( "v=DKIM1; k=rsa; "
+	  "p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQChHkpXhl+izKhPFIgniNaVPgrZtGqHmMY2iHHrhwMS8x6y6FRiXQd+jWkMMDon9H+jNP2Yk8KjolfrX0KEg6l7FWeHGJKwqsltp7x1nx1Qf1paqN5O6Z7QySjCsltjA+Gpepzm93nTPg0Iai1MFpOYbugTSjNrdMbANRzu3dRegwIDAQAB" )  ; ----- DKIM key default for 9509fbb20ce0

mail/conf/opendkim/opendkim.conf

@@ -0,0 +1,15 @@
+UserID                  opendkim:opendkim
+UMask                   022
+Mode                    sv
+PidFile                 /var/run/opendkim.pid
+Canonicalization        relaxed/relaxed
+TemporaryDirectory      /var/tmp
+ExternalIgnoreList      refile:/etc/opendkim/TrustedHosts
+InternalHosts           refile:/etc/opendkim/TrustedHosts
+KeyTable                refile:/etc/opendkim/KeyTable
+SigningTable            refile:/etc/opendkim/SigningTable
+MinimumKeyBits          1024
+Socket                  inet:8891
+LogWhy                  Yes
+Syslog                  Yes
+SyslogSuccess           Yes

mail/conf/opendkim/opendkim.conf.apk-new

@@ -0,0 +1,29 @@
+BaseDirectory		/run/opendkim
+
+#LogWhy                 yes
+Syslog                  yes
+SyslogSuccess           yes
+
+Canonicalization	relaxed/simple
+
+Domain			example.com
+Selector		default
+KeyFile			/var/db/dkim/example.com.private
+
+Socket                  inet:8891@localhost
+#Socket			local:opendkim.sock
+
+ReportAddress           postmaster@example.com
+SendReports             yes
+
+## Hosts to sign email for - 127.0.0.1 is default
+## See the OPERATION section of opendkim(8) for more information
+#
+# InternalHosts		192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12
+
+## For secondary mailservers - indicates not to sign or verify messages
+## from these hosts
+#
+# PeerList		X.X.X.X
+
+# PidFile		/var/run/opendkim/opendkim.pid

mail/conf/opendkim/opendkim.conf.default

@@ -0,0 +1,29 @@
+BaseDirectory		/run/opendkim
+
+#LogWhy                 yes
+Syslog                  yes
+SyslogSuccess           yes
+
+Canonicalization	relaxed/simple
+
+Domain			example.com
+Selector		default
+KeyFile			/var/db/dkim/example.com.private
+
+Socket                  inet:8891@localhost
+#Socket			local:opendkim.sock
+
+ReportAddress           postmaster@example.com
+SendReports             yes
+
+## Hosts to sign email for - 127.0.0.1 is default
+## See the OPERATION section of opendkim(8) for more information
+#
+# InternalHosts		192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12
+
+## For secondary mailservers - indicates not to sign or verify messages
+## from these hosts
+#
+# PeerList		X.X.X.X
+
+# PidFile		/var/run/opendkim/opendkim.pid

mail/conf/postfix/main.cf

@@ -0,0 +1,173 @@
+# See /usr/share/postfix/main.cf.dist for a commented, more complete version
+
+# Debian specific:  Specifying a file name will cause the first
+# line of that file to be used as the name.  The Debian default
+# is /etc/mailname.
+#myorigin = /etc/mailname
+
+smtpd_banner = $myhostname ESMTP $mail_name
+biff = no
+
+# appending .domain is the MUA's job.
+append_dot_mydomain = no
+
+# Uncomment the next line to generate "delayed mail" warnings
+#delay_warning_time = 4h
+
+readme_directory = no
+
+# See http://www.postfix.org/COMPATIBILITY_README.html -- default to 2 on
+# fresh installs.
+compatibility_level = 3.6
+
+# TLS parameters
+#smtpd_tls_cert_file=/etc/letsencrypt/live/example.com/fullchain.pem
+#smtpd_tls_key_file=/etc/letsencrypt/live/example.com/privkey.pem
+#smtpd_use_tls=yes
+#smtpd_tls_auth_only = yes
+#smtp_tls_security_level = may
+#smtpd_tls_security_level = may
+#smtpd_sasl_security_options = noanonymous, noplaintext
+#smtpd_sasl_tls_security_options = noanonymous
+
+# Authentication
+# SASL Auth for SMTP relaying
+smtpd_sasl_type = dovecot
+smtpd_sasl_path = private/auth
+smtpd_sasl_authenticated_header = yes
+smtpd_sasl_auth_enable = yes
+smtpd_sasl_security_options = noanonymous
+broken_sasl_auth_clients = yes
+
+# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
+# information on enabling SSL in the smtp client.
+
+# Restrictions
+smtpd_helo_restrictions =
+        permit_mynetworks
+        permit_sasl_authenticated
+        reject_invalid_helo_hostname
+        reject_non_fqdn_helo_hostname
+
+smtpd_recipient_restrictions =
+        permit_mynetworks
+        permit_sasl_authenticated
+        reject_non_fqdn_recipient
+        reject_unknown_recipient_domain
+        reject_unlisted_recipient
+        reject_unauth_destination
+        
+smtpd_sender_restrictions =
+        permit_mynetworks
+        permit_sasl_authenticated
+        reject_non_fqdn_sender
+        reject_unknown_sender_domain
+        reject_unknown_recipient_domain
+        
+smtpd_relay_restrictions =
+        permit_mynetworks
+        permit_sasl_authenticated
+        defer_unauth_destination
+
+smtpd_data_restrictions =
+        reject_unauth_pipelining
+        permit
+
+# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
+# information on enabling SSL in the smtp client.
+
+myhostname = mail.esin.io
+alias_maps = hash:/etc/postfix/aliases
+alias_database = hash:/postfix/etc/aliases
+mydomain = esin.io
+myorigin = $mydomain
+mydestination = 
+relayhost =
+mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
+#mynetworks = all
+mailbox_size_limit = 0
+recipient_delimiter = +
+inet_interfaces = all
+inet_protocols = all
+
+# Handing off local delivery to Dovecot's LMTP, and telling it where to store mail
+#virtual_transport = virtual
+virtual_transport = lmtp:unix:private/dovecot-lmtp
+
+
+local_transport = virtual
+
+# Virtual domains, users, and aliases
+#virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf
+#virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf
+#virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf,
+#        mysql:/etc/postfix/mysql-virtual-email2email.cf
+
+virtual_mailbox_base = /var/mail/domains
+#virtual_mailbox_domains = proxy:pgsql:/etc/postfix/pgsql_virtual_domains_maps.cf
+#virtual_mailbox_maps = proxy:pgsql:/etc/postfix/pgsql_virtual_mailbox_maps.cf, proxy:pgsql:/etc/postfix/pgsql_virtual_mailbox_domainaliases_maps.cf
+#virtual_alias_maps = proxy:pgsql:/etc/postfix/pgsql_virtual_alias_maps.cf, proxy:pgsql:/etc/postfix/pgsql_virtual_alias_domainaliases_maps.cf
+
+relay_domains = $mydestination, proxy:pgsql:/etc/postfix/pgsql/relay_domains.cf
+virtual_alias_maps = proxy:pgsql:/etc/postfix/pgsql/virtual_alias_maps.cf
+virtual_mailbox_domains = proxy:pgsql:/etc/postfix/pgsql/virtual_domains_maps.cf
+virtual_mailbox_maps = proxy:pgsql:/etc/postfix/pgsql/virtual_mailbox_maps.cf
+local_recipient_maps = $virtual_mailbox_maps
+#smtpd_sender_login_maps = proxy:pgsql:/etc/postfix/pgsql/virtual_sender_maps.cf
+
+virtual_mailbox_limit = 512000000
+virtual_minimum_uid = 8
+
+virtual_uid_maps = static:8
+virtual_gid_maps = static:12
+
+# Even more Restrictions and MTA params
+disable_vrfy_command = yes
+strict_rfc821_envelopes = yes
+#smtpd_etrn_restrictions = reject
+#smtpd_reject_unlisted_sender = yes
+#smtpd_reject_unlisted_recipient = yes
+smtpd_delay_reject = yes
+smtpd_helo_required = yes
+smtp_always_send_ehlo = yes
+#smtpd_hard_error_limit = 1
+smtpd_timeout = 30s
+smtp_helo_timeout = 15s
+smtp_rcpt_timeout = 15s
+smtpd_recipient_limit = 40
+minimal_backoff_time = 180s
+maximal_backoff_time = 3h
+
+# Reply Rejection Codes
+invalid_hostname_reject_code = 550
+non_fqdn_reject_code = 550
+unknown_address_reject_code = 550
+unknown_client_reject_code = 550
+unknown_hostname_reject_code = 550
+unverified_recipient_reject_code = 550
+unverified_sender_reject_code = 550
+
+
+mynetworks_style = subnet
+
+# ---------------------------------
+# Header manipulation
+# --------------------------------------
+ 
+# Getting rid of unwanted headers. See: https://posluns.com/guides/header-removal/
+#header_checks = regexp:/etc/postfix/header_checks
+# getting rid of x-original-to
+enable_original_recipient = no
+
+# ---------------------------------
+# DKIM
+# --------------------------------------
+milter_default_action = accept
+milter_protocol = 2
+smtpd_milters = inet:8891
+non_smtpd_milters = inet:8891
+
+# ---------
+# log
+# --------
+#maillog_file = /var/log/mail.log

mail/conf/postfix/master.cf

@@ -0,0 +1,149 @@
+#
+# Postfix master process configuration file.  For details on the format
+# of the file, see the master(5) manual page (command: "man 5 master" or
+# on-line: http://www.postfix.org/master.5.html).
+#
+# Do not forget to execute "postfix reload" after editing this file.
+#
+# ==========================================================================
+# service type  private unpriv  chroot  wakeup  maxproc command + args
+#               (yes)   (yes)   (no)    (never) (100)
+# ==========================================================================
+smtp      inet  n       -       n       -       -       smtpd
+#smtp      inet  n       -       n       -       1       postscreen
+#smtpd     pass  -       -       n       -       -       smtpd
+#dnsblog   unix  -       -       n       -       0       dnsblog
+#tlsproxy  unix  -       -       n       -       0       tlsproxy
+# Choose one: enable submission for loopback clients only, or for any client.
+submission inet n       -       n       -       -       smtpd
+  -o syslog_name=postfix/submission
+  -o smtpd_tls_wrappermode=no
+  -o smtpd_tls_security_level=encrypt
+  -o smtpd_sasl_auth_enable=yes
+  -o smtpd_sasl_type=dovecot
+  -o smtpd_sasl_path=private/auth
+  -o smtpd_relay_restrictions=permit_mynetworks,permit_sasl_authenticated,defer_unauth_destination  
+#  -o smtpd_client_restrictions=permit_mynetworks,permit_sasl_authenticated,reject 
+  -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject
+  -o milter_macro_daemon_name=ORIGINATING
+#submission inet n       -       n       -       -       smtpd
+#  -o syslog_name=postfix/submission
+#  -o smtpd_tls_security_level=encrypt
+#  -o smtpd_sasl_auth_enable=yes
+#  -o smtpd_tls_auth_only=yes
+#  -o smtpd_reject_unlisted_recipient=no
+#  -o smtpd_client_restrictions=$mua_client_restrictions
+#  -o smtpd_helo_restrictions=$mua_helo_restrictions
+#  -o smtpd_sender_restrictions=$mua_sender_restrictions
+#  -o smtpd_recipient_restrictions=
+#  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
+#  -o milter_macro_daemon_name=ORIGINATING
+# Choose one: enable smtps for loopback clients only, or for any client.
+#127.0.0.1:smtps inet n  -       n       -       -       smtpd
+#smtps     inet  n       -       n       -       -       smtpd
+#  -o syslog_name=postfix/smtps
+#  -o smtpd_tls_wrappermode=yes
+#  -o smtpd_sasl_auth_enable=yes
+#  -o smtpd_reject_unlisted_recipient=no
+#  -o smtpd_client_restrictions=$mua_client_restrictions
+#  -o smtpd_helo_restrictions=$mua_helo_restrictions
+#  -o smtpd_sender_restrictions=$mua_sender_restrictions
+#  -o smtpd_recipient_restrictions=
+#  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
+#  -o milter_macro_daemon_name=ORIGINATING
+#628       inet  n       -       n       -       -       qmqpd
+pickup    unix  n       -       n       60      1       pickup
+cleanup   unix  n       -       n       -       0       cleanup
+qmgr      unix  n       -       n       300     1       qmgr
+#qmgr     unix  n       -       n       300     1       oqmgr
+tlsmgr    unix  -       -       n       1000?   1       tlsmgr
+rewrite   unix  -       -       n       -       -       trivial-rewrite
+bounce    unix  -       -       n       -       0       bounce
+defer     unix  -       -       n       -       0       bounce
+trace     unix  -       -       n       -       0       bounce
+verify    unix  -       -       n       -       1       verify
+flush     unix  n       -       n       1000?   0       flush
+proxymap  unix  -       -       n       -       -       proxymap
+proxywrite unix -       -       n       -       1       proxymap
+smtp      unix  -       -       n       -       -       smtp
+relay     unix  -       -       n       -       -       smtp
+        -o syslog_name=postfix/$service_name
+#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
+showq     unix  n       -       n       -       -       showq
+error     unix  -       -       n       -       -       error
+retry     unix  -       -       n       -       -       error
+discard   unix  -       -       n       -       -       discard
+local     unix  -       n       n       -       -       local
+virtual   unix  -       n       n       -       -       virtual
+lmtp      unix  -       -       n       -       -       lmtp
+anvil     unix  -       -       n       -       1       anvil
+scache    unix  -       -       n       -       1       scache
+postlog   unix-dgram n  -       n       -       1       postlogd
+#
+# ====================================================================
+# Interfaces to non-Postfix software. Be sure to examine the manual
+# pages of the non-Postfix software to find out what options it wants.
+#
+# Many of the following services use the Postfix pipe(8) delivery
+# agent.  See the pipe(8) man page for information about ${recipient}
+# and other message envelope options.
+# ====================================================================
+#
+# maildrop. See the Postfix MAILDROP_README file for details.
+# Also specify in main.cf: maildrop_destination_recipient_limit=1
+#
+maildrop  unix  -       n       n       -       -       pipe
+  flags=DRXhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
+#
+# ====================================================================
+#
+# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
+#
+# Specify in cyrus.conf:
+#   lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
+#
+# Specify in main.cf one or more of the following:
+#  mailbox_transport = lmtp:inet:localhost
+#  virtual_transport = lmtp:inet:localhost
+#
+# ====================================================================
+#
+# Cyrus 2.1.5 (Amos Gouaux)
+# Also specify in main.cf: cyrus_destination_recipient_limit=1
+#
+#cyrus     unix  -       n       n       -       -       pipe
+#  flags=DRX user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
+#
+# ====================================================================
+#
+# Old example of delivery via Cyrus.
+#
+#old-cyrus unix  -       n       n       -       -       pipe
+#  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
+#
+# ====================================================================
+#
+# See the Postfix UUCP_README file for configuration details.
+#
+#uucp      unix  -       n       n       -       -       pipe
+#  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
+#
+# ====================================================================
+#
+# Other external delivery methods.
+#
+#ifmail    unix  -       n       n       -       -       pipe
+#  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
+#
+#bsmtp     unix  -       n       n       -       -       pipe
+#  flags=Fq. user=bsmtp argv=/usr/sbin/bsmtp -f $sender $nexthop $recipient
+#
+#scalemail-backend unix -       n       n       -       2       pipe
+#  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
+#  ${nexthop} ${user} ${extension}
+#
+#mailman   unix  -       n       n       -       -       pipe
+#  flags=FRX user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
+#  ${nexthop} ${user}
+#dovecot   unix  -       n       n       -       -       pipe
+#  flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${recipient}

mail/conf/postfix/mysql/relay_domains.cf

@@ -0,0 +1,5 @@
+user = postfix
+password = password
+hosts = dbserver
+dbname = postfix
+query = SELECT domain FROM domain WHERE domain='%s' AND active = '1' AND (transport LIKE 'smtp%%' OR transport LIKE 'relay%%')

mail/conf/postfix/mysql/transport_maps.cf

@@ -0,0 +1,5 @@
+user = postfix
+password = password
+hosts = dbserver
+dbname = postfix
+query = SELECT transport FROM domain WHERE domain='%s' AND active = '1' AND transport != 'virtual'

mail/conf/postfix/mysql/virtual_alias_domain_catchall_maps.cf

@@ -0,0 +1,5 @@
+user = postfix
+password = password
+hosts = dbserver
+dbname = postfix
+query  = SELECT goto FROM alias,alias_domain WHERE alias_domain.alias_domain = '%d' and alias.address = CONCAT('@', alias_domain.target_domain) AND alias.active='1' AND alias_domain.active='1'

mail/conf/postfix/mysql/virtual_alias_domain_mailbox_maps.cf

@@ -0,0 +1,5 @@
+user = postfix
+password = password
+hosts = dbserver
+dbname = postfix
+query = SELECT maildir FROM mailbox,alias_domain WHERE alias_domain.alias_domain = '%d' and mailbox.username = CONCAT('%u', '@', alias_domain.target_domain) AND mailbox.active='1' AND alias_domain.active='1'

mail/conf/postfix/mysql/virtual_alias_domain_maps.cf

@@ -0,0 +1,5 @@
+user = postfix
+password = password
+hosts = dbserver
+dbname = postfix
+query = SELECT goto FROM alias,alias_domain WHERE alias_domain.alias_domain = '%d' and alias.address = CONCAT('%u', '@', alias_domain.target_domain) AND alias.active='1' AND alias_domain.active='1'

mail/conf/postfix/mysql/virtual_alias_maps.cf

@@ -0,0 +1,5 @@
+user = postfix
+password = password
+hosts = dbserver
+dbname = postfix
+query = SELECT goto FROM alias WHERE address='%s' AND active = '1'

mail/conf/postfix/mysql/virtual_domains_maps.cf

@@ -0,0 +1,10 @@
+user = postfix
+password = password
+hosts = dbserver
+dbname = postfix
+query          = SELECT domain FROM domain WHERE domain='%s' AND active = '1'
+#query          = SELECT domain FROM domain WHERE domain='%s'
+#optional query to use when relaying for backup MX
+#query           = SELECT domain FROM domain WHERE domain='%s' AND backupmx = '0' AND active = '1'
+#optional query to use for transport map support
+#query           = SELECT domain FROM domain WHERE domain='%s' AND active = '1' AND NOT (transport LIKE 'smtp%%' OR transport LIKE 'relay%%')

mail/conf/postfix/mysql/virtual_mailbox_limit_maps.cf

@@ -0,0 +1,5 @@
+user = postfix
+password = password
+hosts = dbserver
+dbname = postfix
+query = SELECT quota FROM mailbox WHERE username='%s' AND active = '1'

mail/conf/postfix/mysql/virtual_mailbox_maps.cf

@@ -0,0 +1,5 @@
+user = postfix
+password = password
+hosts = dbserver
+dbname = postfix
+query = SELECT maildir FROM mailbox WHERE username='%s' AND active = '1'

mail/conf/postfix/mysql/virtual_sender_maps.cf

@@ -0,0 +1,5 @@
+user = postfix
+password = password
+hosts = dbserver
+dbname = postfix
+query = SELECT username FROM mailbox WHERE username='%s' AND active = '1'

mail/conf/postfix/pgsql/relay_domains.cf

@@ -0,0 +1,5 @@
+user = postgres
+password = psqlpass
+hosts = dbserver
+dbname = postfix
+query = SELECT domain FROM domain WHERE domain='%s' AND active = true AND (transport LIKE 'smtp%%' OR transport LIKE 'relay%%')

mail/conf/postfix/pgsql/transport_maps.cf

@@ -0,0 +1,5 @@
+user = postgres
+password = psqlpass
+hosts = dbserver
+dbname = postfix
+query = SELECT transport FROM domain WHERE domain='%s' AND active = true AND transport != 'virtual'

mail/conf/postfix/pgsql/virtual_alias_domain_catchall_maps.cf

@@ -0,0 +1,5 @@
+user = postgres
+password = psqlpass
+hosts = dbserver
+dbname = postfix
+query  = SELECT goto FROM alias,alias_domain WHERE alias_domain.alias_domain = '%d' and alias.address = CONCAT('@', alias_domain.target_domain) AND alias.active=true AND alias_domain.active=true

mail/conf/postfix/pgsql/virtual_alias_domain_mailbox_maps.cf

@@ -0,0 +1,5 @@
+user = postgres
+password = psqlpass
+hosts = dbserver
+dbname = postfix
+query = SELECT maildir FROM mailbox,alias_domain WHERE alias_domain.alias_domain = '%d' and mailbox.username = CONCAT('%u', '@', alias_domain.target_domain) AND mailbox.active=true AND alias_domain.active=true

mail/conf/postfix/pgsql/virtual_alias_domain_maps.cf

@@ -0,0 +1,5 @@
+user = postgres
+password = psqlpass
+hosts = dbserver
+dbname = postfix
+query = SELECT goto FROM alias,alias_domain WHERE alias_domain.alias_domain = '%d' and alias.address = CONCAT('%u', '@', alias_domain.target_domain) AND alias.active=true AND alias_domain.active=true

mail/conf/postfix/pgsql/virtual_alias_maps.cf

@@ -0,0 +1,5 @@
+user = postgres
+password = psqlpass
+hosts = dbserver
+dbname = postfix
+query = SELECT goto FROM alias WHERE address='%s' AND active = true

mail/conf/postfix/pgsql/virtual_domains_maps.cf

@@ -0,0 +1,10 @@
+user = postgres
+password = psqlpass
+hosts = dbserver
+dbname = postfix
+query          = SELECT domain FROM domain WHERE domain='%s' AND active = true
+#query          = SELECT domain FROM domain WHERE domain='%s'
+#optional query to use when relaying for backup MX
+#query           = SELECT domain FROM domain WHERE domain='%s' AND backupmx = false AND active = true
+#optional query to use for transport map support
+#query           = SELECT domain FROM domain WHERE domain='%s' AND active = true AND NOT (transport LIKE 'smtp%%' OR transport LIKE 'relay%%')

mail/conf/postfix/pgsql/virtual_mailbox_limit_maps.cf

@@ -0,0 +1,5 @@
+user = postgres
+password = psqlpass
+hosts = dbserver
+dbname = postfix
+query = SELECT quota FROM mailbox WHERE username='%s' AND active = true

mail/conf/postfix/pgsql/virtual_mailbox_maps.cf

@@ -0,0 +1,5 @@
+user = postgres
+password = psqlpass
+hosts = dbserver
+dbname = postfix
+query = SELECT maildir FROM mailbox WHERE username='%s' AND active = true

mail/conf/postfix/pgsql/virtual_sender_maps.cf

@@ -0,0 +1,5 @@
+user = postgres
+password = psqlpass
+hosts = dbserver
+dbname = postfix
+query = SELECT username FROM mailbox WHERE username='%s' AND active = true

mail/dkim.sh

@@ -0,0 +1,42 @@
+cat > /etc/opendkim.conf<<EOF
+UserID                  opendkim:opendkim
+UMask                   022
+Mode                    sv
+PidFile                 /var/run/opendkim/opendkim.pid
+Canonicalization        relaxed/relaxed
+TemporaryDirectory      /var/tmp
+ExternalIgnoreList      refile:/etc/opendkim/TrustedHosts
+InternalHosts           refile:/etc/opendkim/TrustedHosts
+KeyTable                refile:/etc/opendkim/KeyTable
+SigningTable            refile:/etc/opendkim/SigningTable
+MinimumKeyBits          1024
+Socket                  inet:8891
+LogWhy                  Yes
+Syslog                  Yes
+SyslogSuccess           Yes
+EOF
+
+mkdir -p /etc/opendkim/keys/`hostname -f`
+opendkim-genkey -D /etc/opendkim/keys/`hostname -f`/ -d `hostname -f` -s default
+
+#chown opendkim:opendkim -R /etc/opendkim/
+#chmod -R 700 /etc/opendkim
+
+echo "default._domainkey.`hostname -f` `hostname -f`:default:/etc/opendkim/keys/`hostname -f`/default.private" >> /etc/opendkim/KeyTable
+echo "*@`hostname -f` default._domainkey.`hostname -f`" >> /etc/opendkim/SigningTable
+echo "localhost" >> /etc/opendkim/TrustedHosts
+echo "`hostname -f`" >> /etc/opendkim/TrustedHosts
+cat >> /etc/postfix/main.cf<<EOF
+
+#DKIM
+milter_default_action = accept
+milter_protocol = 2
+smtpd_milters = inet:8891
+non_smtpd_milters = inet:8891
+EOF
+
+#service opendkim start
+#service postfix restart
+cp /etc/opendkim/keys/`hostname -f`/default.txt /root/`hostname -f`-dkim-signature_default.txt
+
+echo "open '/root/`hostname -f`-dkim-signature_default.txt', then add the TXT record to you DNS resolution system."

mail/doc

@@ -0,0 +1,26 @@
+# create password
+doveadm pw -s MD5-CRYPT -p admin | sed 's/{MD5-CRYPT}//'
+
+chown -R mail:mail /var/lib/vmail/
+chown -R postfix /var/lib/postfix/
+
+
+
+spamassassin ? rspamd \
+
+# start apps
+/ # opendkim
+/ # dovecot
+/ # syslogd
+/ # postfix start
+
+
+# useful documents
+https://www.linode.com/docs/guides/configure-spf-and-dkim-in-postfix-on-debian-9/
+https://github.com/postfixadmin/postfixadmin/blob/master/DOCUMENTS/Postfix-Dovecot-Postgresql-Example.md
+https://doc.dovecot.org/configuration_manual/howto/postfix_and_dovecot_sasl/
+https://wiki.archlinux.org/title/Virtual_user_mail_system_with_Postfix,_Dovecot_and_Roundcube
+
+# do some checking
+postmap -q esin.io proxy:pgsql:/etc/postfix/pgsql/virtual_alias_maps.cf
+postmap -q hi@esin.io proxy:pgsql:/etc/postfix/pgsql/virtual_mailbox_maps.cf

mail/docker-compose.yml

@@ -0,0 +1,83 @@
+version: "3.9"
+services:
+  mailserver:
+    image: esinio/mail
+    volumes:
+      - ./mail:/var/mail
+      - ./log:/var/log
+    ports:
+      - "25:25"
+      - 143:143
+      - 110:110
+      - 465:465
+      - 993:993
+      - 995:995
+    external_links:
+      - postgresql:dbserver
+    networks:
+      - traefik
+      - database
+  webmail:
+    image: roundcube/roundcubemail
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.webmail.rule=Host(`mail.esin.io`)"
+      - "traefik.http.routers.webmail.tls=true"
+      - "traefik.http.routers.webmail.middlewares=webmail-mw"
+      - "traefik.http.middlewares.webmail-mw.compress=true"
+      - "traefik.http.services.webmail.loadbalancer.server.port=80"
+    environment:
+      - ROUNDCUBEMAIL_DEFAULT_HOST=mailserver
+      - ROUNDCUBEMAIL_DEFAULT_PORT=143
+      - ROUNDCUBEMAIL_SMTP_SERVER=mailserver
+      - ROUNDCUBEMAIL_SMTP_PORT=25
+    ports:
+      - 8000:80
+    links:
+      - mailserver
+    depends_on:
+      - mailserver
+    networks:
+      - traefik
+      - database
+  postfixadmin:
+    image: postfixadmin:3.3.10-apache
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.postfixadmin.rule=Host(`postfixadmin.esin.io`)"
+      - "traefik.http.routers.postfixadmin.tls=true"
+      - "traefik.http.routers.postfixadmin.middlewares=postfixadmin-mw"
+      - "traefik.http.middlewares.postfixadmin-mw.compress=true"
+      - "traefik.http.services.postfixadmin.loadbalancer.server.port=80"
+    environment:
+      - POSTFIXADMIN_SETUP_PASSWORD=${POSTFIXADMIN_SETUP_PASSWORD}
+      - POSTFIXADMIN_DB_TYPE=pgsql
+      - POSTFIXADMIN_DB_HOST=dbserver
+      - POSTFIXADMIN_DB_USER=${POSTGRES_USER}
+      - POSTFIXADMIN_DB_PASSWORD=${POSTGRES_PASSWORD}
+      - POSTFIXADMIN_DB_NAME=postfix
+      - POSTFIXADMIN_SMTP_SERVER=${POSTFIXADMIN_SMTP_SERVER}
+      - POSTFIXADMIN_SMTP_PORT=${POSTFIXADMIN_SMTP_PORT}
+      # - POSTFIXADMIN_DB_TYPE=mysqli
+      # - POSTFIXADMIN_DB_HOST=dbserver
+      # - POSTFIXADMIN_DB_USER=${MARIADB_USER}
+      # - POSTFIXADMIN_DB_PASSWORD=${MARIADB_PASSWORD}
+      # - POSTFIXADMIN_DB_NAME=postfix
+      # - POSTFIXADMIN_SMTP_SERVER=${POSTFIXADMIN_SMTP_SERVER}
+      # - POSTFIXADMIN_SMTP_PORT=${POSTFIXADMIN_SMTP_PORT}
+    restart: unless-stopped
+    external_links:
+      - postgresql:dbserver
+    links:
+      - mailserver
+    depends_on:
+      - mailserver
+    networks:
+      - traefik
+      - database
+
+networks:
+  traefik:
+    external: true
+  database:
+    external: true

mail/run.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+# maildir
+MAIL_PATH="/var/mail/domains"
+MAIL_USER="mail"
+
+if [ ! -d ${MAIL_PATH} ]; then mkdir -p ${MAIL_PATH}; fi
+chown -R ${MAIL_USER} ${MAIL_PATH}
+
+# openkdim
+chown -R opendkim:opendkim /etc/opendkim
+
+# starting
+syslogd; opendkim; postfix start; dovecot -F