Merge branch 'master' of https://github.com/wangyu-/UDPspeeder

README.md

@@ -1,21 +1,114 @@
 # UDPspeeder
-Network Speed-Up Tool. Boost your Connection on a High Lantency High Packet-Loss Link by using Forward Error Correction
+Network Speed-Up Tool. Boost your Connection on a High Lantency High Packet-Loss Link by using Forward Error Correction.
 
-When used independently,UDPspeeder speeds-up only udp connection.Nevertheless,if you used UDPspeeder + any UDP based VPN together,you can speed-up any traffic(include tcp/udp/icmp)。
+When used alone,UDPspeeder speeds-up only udp connection.Nevertheless,if you used UDPspeeder + any UDP-based VPN together,you can speed-up any traffic(include tcp/udp/icmp)。
+
+![](/images/en/udpspeeder.PNG)
+
+or
+
+![image_vpn](/images/en/udpspeeder+openvpn.PNG)
 
 [简体中文](/doc/README.md)
 
-# Support Platforms
+# Efficacy
+tested on a link with 100ms latency and 10% packet loss at both direction
+
+### Ping Packet Loss
+![](/images/en/ping_compare3.PNG)
+
+### SCP Copy Speed
+![](/images/en/scp_compare2.PNG)
+
+# Supported Platforms
 Linux host (including desktop Linux,Android phone/tablet,OpenWRT router,or Raspberry PI).
 
-Windows and Mac support will be added in furture,before its done,you can run UDPspeeder inside [this](https://github.com/wangyu-/udp2raw-tunnel/releases/download/20170918.0/lede-17.01.2-x86_virtual_machine_image_with_udp2raw_pre_installed.zip) 7.5mb virtual machine image.
+For Windows and MacOS You can run UDPspeeder inside [this](https://github.com/wangyu-/udp2raw-tunnel/releases/download/20170918.0/lede-17.01.2-x86_virtual_machine_image_with_udp2raw_pre_installed.zip) 7.5mb virtual machine image.
-
-# Effect
 
 # How does it work
 
-UDPspeeder use (FEC)Forward Error Correction to defend again packet loss.It improves your connection at the cost of addtional bandwidth.The algorithm for FEC is Reed-Solomon.
+UDPspeeder uses FEC(Forward Error Correction) to improve your connection's quality,at the cost of addtional bandwidth.The algorithm for FEC is called Reed-Solomon.
 
-# Quick Start
+### Reed-Solomon
 
-todo.....
+`
+In coding theory, the Reed–Solomon code belongs to the class of non-binary cyclic error-correcting codes. The Reed–Solomon code is based on univariate polynomials over finite fields.
+`
+
+`
+It is able to detect and correct multiple symbol errors. By adding t check symbols to the data, a Reed–Solomon code can detect any combination of up to t erroneous symbols, or correct up to ⌊t/2⌋ symbols. As an erasure code, it can correct up to t known erasures, or it can detect and correct combinations of errors and erasures. Reed–Solomon codes are also suitable as multiple-burst bit-error correcting codes, since a sequence of b + 1 consecutive bit errors can affect at most two symbols of size b. The choice of t is up to the designer of the code, and may be selected within wide limits.
+`
+
+![](/images/en/rs.png)
+
+Check wikipedia for more info, https://en.wikipedia.org/wiki/Reed–Solomon_error_correction
+
+# Getting Started
+
+### Installing
+Download binary release from https://github.com/wangyu-/UDPspeeder/releases
+
+### Running (speed-up UDP only)
+Assume your server ip is 44.55.66.77, you have a service listening on udp port 7777.
+
+```bash
+# Run at server side:
+./speederv2 -s -l0.0.0.0:4096 -r 127.0.0.1:7777  -f20:10
+
+# Run at client side
+./speederv2 -c -l0.0.0.0:3333  -r44.55.66.77:4096 -f20:10
+```
+
+Now connecting to UDP port 3333 at the client side is equivalent to connecting to port 7777 at the server side,and the connection is boosted by UDPspeeder.
+
+##### Note
+
+`-f20:10` means sending 10 redundant packets for every 20 original packets.
+
+# Advanced Topic
+### Full Options
+```
+UDPspeeder V2
+git version:f479ca2779    build date:Oct 19 2017 01:37:08
+repository: https://github.com/wangyu-/UDPspeeder
+
+usage:
+    run as client : ./this_program -c -l local_listen_ip:local_port -r server_ip:server_port  [options]
+    run as server : ./this_program -s -l server_listen_ip:server_port -r remote_ip:remote_port  [options]
+
+common option,must be same on both sides:
+    -k,--key              <string>        key for simple xor encryption. if not set,xor is disabled
+main options:
+    -f,--fec              x:y             forward error correction,send y redundant packets for every x packets
+    --timeout             <number>        how long could a packet be held in queue before doing fec,unit: ms
+    --mode                <number>        fec-mode,available values: 0,1 ; 0 cost less bandwidth,1 cost less latency
+    --report              <number>        turn on send/recv report,and set a period for reporting,unit:s
+advanced options:
+    --mtu                 <number>        mtu. for mode 0,the program will split packet to segment smaller than mtu_value.
+                                          for mode 1,no packet will be split,the program just check if the mtu is exceed.
+                                          default value:1250 
+    -j,--jitter           <number>        simulated jitter.randomly delay first packet for 0~<number> ms,default value:0.
+                                          do not use if you dont know what it means.
+    -i,--interval         <number>        scatter each fec group to a interval of <number> ms,to protect burst packet loss.
+                                          default value:0.do not use if you dont know what it means.
+    --random-drop         <number>        simulate packet loss ,unit:0.01%. default value: 0
+    --disable-obscure     <number>        disable obscure,to save a bit bandwidth and cpu
+developer options:
+    -j ,--jitter          jmin:jmax       similiar to -j above,but create jitter randomly between jmin and jmax
+    -i,--interval         imin:imax       similiar to -i above,but scatter randomly between imin and imax
+    -q,--queue-len        <number>        max fec queue len,only for mode 0
+    --decode-buf          <number>        size of buffer of fec decoder,unit:packet,default:2000
+    --fix-latency         <number>        try to stabilize latency,only for mode 0
+    --delay-capacity      <number>        max number of delayed packets
+    --disable-fec         <number>        completely disable fec,turn the program into a normal udp tunnel
+    --sock-buf            <number>        buf size for socket,>=10 and <=10240,unit:kbyte,default:1024
+log and help options:
+    --log-level           <number>        0:never    1:fatal   2:error   3:warn 
+                                          4:info (default)     5:debug   6:trace
+    --log-position                        enable file name,function name,line number in log
+    --disable-color                       disable log color
+    -h,--help                             print this help message
+```
+### Speed-Up any traffic with OpenVPN+UDPspeeder
+
+Check [UDPspeeder + openvpn config guide](/doc/udpspeeder_openvpn.md).

doc/udpspeeder_openvpn.md

@@ -0,0 +1,86 @@
+
+# UDPspeeder + openvpn config guide
+![image_vpn](/images/en/udpspeeder+openvpn.PNG)
+
+# UDPspeeder command
+#### run at server side
+```
+./speederv2 -s -l0.0.0.0:8855 -r 127.0.0.1:7777 -f20:10
+```
+#### run at client side
+assume server ip is 45.66.77.88
+```
+./speederv2 -c -l0.0.0.0:3333 -r 45.66.77.88:8855 -f20:10
+```
+
+# openvpn config
+
+#### client side config
+```
+client
+dev tun100
+proto udp
+
+remote 127.0.0.1 3333
+resolv-retry infinite 
+nobind 
+persist-key 
+persist-tun  
+
+ca /root/add-on/openvpn/ca.crt
+cert /root/add-on/openvpn/client.crt
+key /root/add-on/openvpn/client.key
+
+keepalive 3 20
+verb 3
+mute 20
+
+comp-lzo no
+
+fragment 1200       ##### very important    you can turn it up a bit. but,the lower the safer
+mssfix 1200         ##### very important
+
+sndbuf 2000000      ##### important
+rcvbuf 2000000      ##### important
+txqueuelen 4000     ##### suggested
+```
+
+
+#### server side config
+```
+local 0.0.0.0
+port 7777 
+proto udp
+dev tun 
+
+ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt
+cert /etc/openvpn/easy-rsa/2.0/keys/server.crt
+key /etc/openvpn/easy-rsa/2.0/keys/server.key
+dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem
+
+server 10.222.2.0 255.255.255.0 
+ifconfig 10.222.2.1 10.222.2.6
+
+client-to-client
+duplicate-cn 
+keepalive 10 60 
+
+max-clients 50
+
+persist-key
+persist-tun
+
+status /etc/openvpn/openvpn-status.log
+
+verb 3
+mute 20  
+
+comp-lzo no
+
+fragment 1200       ##### very important    you can turn it up a bit. but,the lower the safer
+mssfix 1200         ##### very important
+
+sndbuf 2000000      ##### important
+rcvbuf 2000000      ##### important
+txqueuelen 4000     ##### suggested
+```

images/en/11

@@ -0,0 +1 @@
+